virtualbox.org

Just did a reboot of my VB and now I'm getting the below error.

Result Code:
E_FAIL (0x80004005)
Component:
SessionMachine
Interface:
ISession {c0447716-ff5a-4795-b57a-ecd5fffa18a4}

I don't have it set up to restore form previous state and I'm not seeing any errors in the log form what I can tell. Here are the last few lines. Any help would be greatly appreciated.

--------------------------------------

00:00:04.385801 EFI: VBoxDbg> loadimage64 'R:/tinderbox/efi2-6.1/out/win.amd64/release/obj/VBoxEfiFirmware/amd64/RELEASE_VS2010/X64/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe/DEBUG/UsbMassStorageDxe.efi' 0x3de3f000 LB 0x3080
00:00:04.557257 Display::i_handleDisplayResize: uScreenId=0 pvVRAM=0000000005bd0000 w=1024 h=768 bpp=32 cbLine=0x1000 flags=0x0 origin=0,0
00:00:04.682729 PS2K: Selected scan set 2
00:00:04.684920 EHCI: Hardware reset
00:00:04.685049 EHCI: USB Operational
00:00:04.760453 ATA: LUN#2: EXECUTE DEVICE DIAGNOSTIC, status 00
00:00:04.785841 AHCI#0: Reset the HBA
00:00:04.785888 VD#0: Cancelling all active requests
00:00:05.027055 EFI: VBoxDbg> loadimage64 'R:/tinderbox/efi2-6.1/out/win.amd64/release/obj/VBoxEfiFirmware/amd64/RELEASE_VS2010/X64/ShellPkg/Application/Shell/Shell/DEBUG/Shell.efi' 0x3dbb0000 LB 0xd97e0
00:29:45.005123 Audio: Device configuration of driver 'DSoundAudio' has changed
00:29:49.634415 Audio: Device configuration of driver 'DSoundAudio' has changed

It is extremely likely that the error message had more before the posted part, and I'm not sure what the posted snippet of log is supposed to show or why that particular part stood out.

Please post the whole error message if it happens again.

Also, start the guest from full normal shutdown, not save-state. Run until you see the problem happen, then shut down the guest from within the guest OS if possible. If not possible, close the Virtualbox window for the guest with the Power Off option set.

Right-click the guest in the main Virtualbox window's guest list, choose Show Log. Save the far left tab's log, zip it, and post the zip file, using the forum's Upload Attachment tab.