/sbin/vboxconfig error when installing VB 6.1 on MX Linux 18.3
Posted: 3. Jan 2020, 10:32
I removed and purged the old version of VB from my MX Linux 18.3 installation, and I removed dependencies, too. I have virtualization support enabled in the BIOS, and secure boot is disabled. This distro is based on Debian 9.
Log attached.
I downloaded "virtualbox-6.1_6.1.0-135406~Debian~stretch_amd64" from the VB website, and installed. No errors during installation.
When attempting to run a VM, I got an error message telling me to run "/sbin/vboxconfig".
I did, but there were errors. Please see output:
Log attached
Log attached.
I downloaded "virtualbox-6.1_6.1.0-135406~Debian~stretch_amd64" from the VB website, and installed. No errors during installation.
When attempting to run a VM, I got an error message telling me to run "/sbin/vboxconfig".
I did, but there were errors. Please see output:
Code: Select all
Shmuel@Shmuel-MX18:~
$ sudo /sbin/vboxconfig
[sudo] password for Shmuel:
vboxdrv.sh: Stopping VirtualBox services.
vboxdrv.sh: Starting VirtualBox services.
vboxdrv.sh: Building VirtualBox kernel modules.
vboxdrv.sh: failed: modprobe vboxdrv failed. Please use 'dmesg' to find out why.
There were problems setting up VirtualBox. To re-start the set-up process, run
/sbin/vboxconfig
as root. If your system is using EFI Secure Boot you may need to sign the
kernel modules (vboxdrv, vboxnetflt, vboxnetadp, vboxpci) before you can load
them. Please see your Linux system's documentation for more information.
Shmuel@Shmuel-MX18:~
$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0xd6, date = 2019-10-03
[ 0.000000] Linux version 4.19.0-5-amd64 (stevep@mxlinux.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP Debian 4.19.37-2~mx17+1 (2019-05-15)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=03e7e219-de1e-4224-bf31-6394d8fce03b ro quiet splash
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b2125fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b2126000-0x00000000b2126fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b2127000-0x00000000b2150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b2151000-0x00000000b21f5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b21f6000-0x00000000b2876fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b2877000-0x00000000bc722fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bc723000-0x00000000bf201fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf202000-0x00000000bf239fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf23a000-0x00000000bfa00fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfa01000-0x00000000bff94fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bff95000-0x00000000bfffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bffff000-0x00000000bfffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023affffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ESRT=0xbfedae98 ACPI=0xbf20d000 ACPI 2.0=0xbf20d000 SMBIOS=0xf05b0 SMBIOS 3.0=0xf05d0 MPS=0xfc9b0
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/B150M-K D3, BIOS 0601 11/20/2015
[ 0.000000] tsc: Detected 3200.000 MHz processor
[ 0.001402] tsc: Detected 3192.000 MHz TSC
[ 0.001402] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001403] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001409] last_pfn = 0x23b000 max_arch_pfn = 0x400000000
[ 0.001412] MTRR default type: write-back
[ 0.001413] MTRR fixed ranges enabled:
[ 0.001414] 00000-9FFFF write-back
[ 0.001414] A0000-BFFFF uncachable
[ 0.001415] C0000-FFFFF write-protect
[ 0.001415] MTRR variable ranges enabled:
[ 0.001416] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.001417] 1 base 00D0000000 mask 7FF0000000 uncachable
[ 0.001418] 2 base 00C8000000 mask 7FF8000000 uncachable
[ 0.001418] 3 base 00C4000000 mask 7FFC000000 uncachable
[ 0.001419] 4 base 00C2000000 mask 7FFE000000 uncachable
[ 0.001419] 5 base 00C1000000 mask 7FFF000000 uncachable
[ 0.001420] 6 base 00C0800000 mask 7FFF800000 uncachable
[ 0.001420] 7 disabled
[ 0.001420] 8 disabled
[ 0.001421] 9 disabled
[ 0.002095] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002199] last_pfn = 0xc0000 max_arch_pfn = 0x400000000
[ 0.008324] found SMP MP-table at [mem 0x000fcbd0-0x000fcbdf]
[ 0.008335] esrt: Reserving ESRT space from 0x00000000bfedae98 to 0x00000000bfedaed0.
[ 0.008339] Base memory trampoline at [(____ptrval____)] 96000 size 24576
[ 0.008341] Using GB pages for direct mapping
[ 0.008343] BRK [0x15ca01000, 0x15ca01fff] PGTABLE
[ 0.008344] BRK [0x15ca02000, 0x15ca02fff] PGTABLE
[ 0.008345] BRK [0x15ca03000, 0x15ca03fff] PGTABLE
[ 0.008366] BRK [0x15ca04000, 0x15ca04fff] PGTABLE
[ 0.008368] BRK [0x15ca05000, 0x15ca05fff] PGTABLE
[ 0.008455] BRK [0x15ca06000, 0x15ca06fff] PGTABLE
[ 0.008473] BRK [0x15ca07000, 0x15ca07fff] PGTABLE
[ 0.008504] BRK [0x15ca08000, 0x15ca08fff] PGTABLE
[ 0.008530] BRK [0x15ca09000, 0x15ca09fff] PGTABLE
[ 0.008553] BRK [0x15ca0a000, 0x15ca0afff] PGTABLE
[ 0.008574] RAMDISK: [mem 0x311d3000-0x348e0fff]
[ 0.008579] ACPI: Early table checksum verification disabled
[ 0.008581] ACPI: RSDP 0x00000000BF20D000 000024 (v02 ALASKA)
[ 0.008584] ACPI: XSDT 0x00000000BF20D0A0 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008588] ACPI: FACP 0x00000000BF22E3C0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.008591] ACPI: DSDT 0x00000000BF20D1E8 0211D4 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.008594] ACPI: FACS 0x00000000BFA00F80 000040
[ 0.008595] ACPI: APIC 0x00000000BF22E4D0 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.008597] ACPI: FPDT 0x00000000BF22E558 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008599] ACPI: FIDT 0x00000000BF22E5A0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008601] ACPI: MCFG 0x00000000BF22E640 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.008603] ACPI: HPET 0x00000000BF22E680 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
[ 0.008605] ACPI: SSDT 0x00000000BF22E6B8 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.008607] ACPI: LPIT 0x00000000BF22EA28 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.008609] ACPI: SSDT 0x00000000BF22EAC0 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.008611] ACPI: SSDT 0x00000000BF22ED08 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
[ 0.008613] ACPI: SSDT 0x00000000BF2318B8 000CF3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
[ 0.008615] ACPI: DBGP 0x00000000BF2325B0 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.008617] ACPI: DBG2 0x00000000BF2325E8 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.008619] ACPI: SSDT 0x00000000BF232640 000705 (v02 INTEL xh_rvp08 00000000 INTL 20120913)
[ 0.008621] ACPI: SSDT 0x00000000BF232D48 0052EA (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.008623] ACPI: UEFI 0x00000000BF238038 000042 (v01 00000000 00000000)
[ 0.008625] ACPI: SSDT 0x00000000BF238080 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.008627] ACPI: ASF! 0x00000000BF238F30 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.008633] ACPI: Local APIC address 0xfee00000
[ 0.008776] No NUMA configuration found
[ 0.008776] Faking a node at [mem 0x0000000000000000-0x000000023affffff]
[ 0.008779] NODE_DATA(0) allocated [mem 0x23affb000-0x23affffff]
[ 0.008796] Zone ranges:
[ 0.008797] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008798] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008799] Normal [mem 0x0000000100000000-0x000000023affffff]
[ 0.008799] Device empty
[ 0.008800] Movable zone start for each node
[ 0.008801] Early memory node ranges
[ 0.008801] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.008802] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.008802] node 0: [mem 0x0000000000100000-0x00000000b2125fff]
[ 0.008803] node 0: [mem 0x00000000b2151000-0x00000000b21f5fff]
[ 0.008803] node 0: [mem 0x00000000b2877000-0x00000000bc722fff]
[ 0.008803] node 0: [mem 0x00000000bffff000-0x00000000bfffffff]
[ 0.008804] node 0: [mem 0x0000000100000000-0x000000023affffff]
[ 0.008806] Reserved but unavailable: 98 pages
[ 0.008807] Initmem setup node 0 [mem 0x0000000000001000-0x000000023affffff]
[ 0.008808] On node 0 totalpages: 2060309
[ 0.008809] DMA zone: 64 pages used for memmap
[ 0.008809] DMA zone: 26 pages reserved
[ 0.008810] DMA zone: 3997 pages, LIFO batch:0
[ 0.008877] DMA32 zone: 11970 pages used for memmap
[ 0.008877] DMA32 zone: 766072 pages, LIFO batch:63
[ 0.022217] Normal zone: 20160 pages used for memmap
[ 0.022218] Normal zone: 1290240 pages, LIFO batch:63
[ 0.043027] Reserving Intel graphics memory at [mem 0xc1000000-0xc2ffffff]
[ 0.043179] ACPI: PM-Timer IO Port: 0x1808
[ 0.043180] ACPI: Local APIC address 0xfee00000
[ 0.043185] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.043185] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.043186] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.043186] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.043212] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.043213] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.043214] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.043215] ACPI: IRQ0 used by override.
[ 0.043216] ACPI: IRQ9 used by override.
[ 0.043218] Using ACPI (MADT) for SMP configuration information
[ 0.043219] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.043222] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.043236] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.043237] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.043238] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.043238] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.043239] PM: Registered nosave memory: [mem 0xb2126000-0xb2126fff]
[ 0.043239] PM: Registered nosave memory: [mem 0xb2127000-0xb2150fff]
[ 0.043241] PM: Registered nosave memory: [mem 0xb21f6000-0xb2876fff]
[ 0.043242] PM: Registered nosave memory: [mem 0xbc723000-0xbf201fff]
[ 0.043242] PM: Registered nosave memory: [mem 0xbf202000-0xbf239fff]
[ 0.043242] PM: Registered nosave memory: [mem 0xbf23a000-0xbfa00fff]
[ 0.043243] PM: Registered nosave memory: [mem 0xbfa01000-0xbff94fff]
[ 0.043243] PM: Registered nosave memory: [mem 0xbff95000-0xbfffefff]
[ 0.043244] PM: Registered nosave memory: [mem 0xc0000000-0xc0ffffff]
[ 0.043244] PM: Registered nosave memory: [mem 0xc1000000-0xc2ffffff]
[ 0.043245] PM: Registered nosave memory: [mem 0xc3000000-0xf7ffffff]
[ 0.043245] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.043246] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
[ 0.043246] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.043246] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.043247] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.043247] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.043247] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.043248] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.043248] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.043249] [mem 0xc3000000-0xf7ffffff] available for PCI devices
[ 0.043250] Booting paravirtualized kernel on bare hardware
[ 0.043252] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.120320] random: get_random_bytes called from start_kernel+0x94/0x540 with crng_init=0
[ 0.120325] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.120443] percpu: Embedded 44 pages/cpu s143256 r8192 d28776 u524288
[ 0.120448] pcpu-alloc: s143256 r8192 d28776 u524288 alloc=1*2097152
[ 0.120449] pcpu-alloc: [0] 0 1 2 3
[ 0.120464] Built 1 zonelists, mobility grouping on. Total pages: 2028089
[ 0.120465] Policy zone: Normal
[ 0.120466] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=03e7e219-de1e-4224-bf31-6394d8fce03b ro quiet splash
[ 0.123396] Calgary: detecting Calgary via BIOS EBDA area
[ 0.123397] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.140875] Memory: 7773540K/8241236K available (10252K kernel code, 1242K rwdata, 3260K rodata, 1584K init, 2304K bss, 467696K reserved, 0K cma-reserved)
[ 0.140939] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.140943] Kernel/User page tables isolation: enabled
[ 0.150716] ftrace: allocating 31811 entries in 125 pages
[ 0.160544] rcu: Hierarchical RCU implementation.
[ 0.160546] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.160547] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.162631] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[ 0.162922] spurious 8259A interrupt: IRQ7.
[ 0.162945] Console: colour dummy device 80x25
[ 0.162949] console [tty0] enabled
[ 0.162961] ACPI: Core revision 20180810
[ 0.163219] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.163248] hpet clockevent registered
[ 0.163315] APIC: Switch to symmetric I/O mode setup
[ 0.164709] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.167959] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.172257] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e02c4a121d, max_idle_ns: 440795236083 ns
[ 0.172266] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.00 BogoMIPS (lpj=3192000)
[ 0.172268] pid_max: default: 32768 minimum: 301
[ 0.172778] Security Framework initialized
[ 0.172778] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.172790] AppArmor: AppArmor initialized
[ 0.173621] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.174049] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.174069] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.174082] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.174225] mce: CPU supports 10 MCE banks
[ 0.174232] CPU0: Thermal monitoring enabled (TM1)
[ 0.174246] process: using mwait in idle threads
[ 0.174248] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.174249] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.174250] Spectre V2 : Mitigation: Full generic retpoline
[ 0.174250] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.174251] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.174255] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.174255] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.174279] MDS: Mitigation: Clear CPU buffers
[ 0.178909] Freeing SMP alternatives memory: 24K
[ 0.184324] TSC deadline timer enabled
[ 0.184329] smpboot: CPU0: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.184386] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.184411] ... version: 4
[ 0.184411] ... bit width: 48
[ 0.184412] ... generic registers: 8
[ 0.184412] ... value mask: 0000ffffffffffff
[ 0.184413] ... max period: 00007fffffffffff
[ 0.184413] ... fixed-purpose events: 3
[ 0.184413] ... event mask: 00000007000000ff
[ 0.184442] rcu: Hierarchical SRCU implementation.
[ 0.184738] random: crng done (trusting CPU's manufacturer)
[ 0.184939] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.184965] smp: Bringing up secondary CPUs ...
[ 0.185011] x86: Booting SMP configuration:
[ 0.185011] .... node #0, CPUs: #1 #2 #3
[ 0.190035] smp: Brought up 1 node, 4 CPUs
[ 0.190035] smpboot: Max logical packages: 1
[ 0.190035] smpboot: Total of 4 processors activated (25536.00 BogoMIPS)
[ 0.190448] devtmpfs: initialized
[ 0.190448] x86/mm: Memory block size: 128MB
[ 0.190721] PM: Registering ACPI NVS region [mem 0xb2126000-0xb2126fff] (4096 bytes)
[ 0.190721] PM: Registering ACPI NVS region [mem 0xbf23a000-0xbfa00fff] (8155136 bytes)
[ 0.190721] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.190721] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.190721] pinctrl core: initialized pinctrl subsystem
[ 0.191277] NET: Registered protocol family 16
[ 0.191329] audit: initializing netlink subsys (disabled)
[ 0.191333] audit: type=2000 audit(1578046514.029:1): state=initialized audit_enabled=0 res=1
[ 0.191333] cpuidle: using governor ladder
[ 0.191333] cpuidle: using governor menu
[ 0.191333] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.191333] ACPI: bus type PCI registered
[ 0.191333] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.191333] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.191333] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.191333] PCI: Using configuration type 1 for base access
[ 0.191805] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.191805] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.192269] ACPI: Added _OSI(Module Device)
[ 0.192270] ACPI: Added _OSI(Processor Device)
[ 0.192270] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.192271] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.192272] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.192272] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.219057] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.223453] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.226309] ACPI: Dynamic OEM Table Load:
[ 0.226314] ACPI: SSDT 0xFFFF8ACE71140800 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.226656] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.227889] ACPI: Dynamic OEM Table Load:
[ 0.227892] ACPI: SSDT 0xFFFF8ACE71205400 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.228447] ACPI: Dynamic OEM Table Load:
[ 0.228451] ACPI: SSDT 0xFFFF8ACE71143000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.228941] ACPI: Dynamic OEM Table Load:
[ 0.228944] ACPI: SSDT 0xFFFF8ACE7115C200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.231223] ACPI: Interpreter enabled
[ 0.231254] ACPI: (supports S0 S3 S4 S5)
[ 0.231254] ACPI: Using IOAPIC for interrupt routing
[ 0.231281] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.231963] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.233841] ACPI: Power Resource [PG00] (on)
[ 0.234146] ACPI: Power Resource [PG01] (on)
[ 0.234422] ACPI: Power Resource [PG02] (on)
[ 0.236212] ACPI: Power Resource [WRST] (off)
[ 0.236497] ACPI: Power Resource [WRST] (off)
[ 0.236782] ACPI: Power Resource [WRST] (off)
[ 0.237066] ACPI: Power Resource [WRST] (off)
[ 0.237352] ACPI: Power Resource [WRST] (off)
[ 0.237636] ACPI: Power Resource [WRST] (off)
[ 0.237924] ACPI: Power Resource [WRST] (off)
[ 0.238207] ACPI: Power Resource [WRST] (off)
[ 0.238492] ACPI: Power Resource [WRST] (off)
[ 0.238770] ACPI: Power Resource [WRST] (off)
[ 0.239054] ACPI: Power Resource [WRST] (off)
[ 0.239337] ACPI: Power Resource [WRST] (off)
[ 0.239623] ACPI: Power Resource [WRST] (off)
[ 0.239908] ACPI: Power Resource [WRST] (off)
[ 0.240192] ACPI: Power Resource [WRST] (off)
[ 0.240478] ACPI: Power Resource [WRST] (off)
[ 0.240762] ACPI: Power Resource [WRST] (off)
[ 0.241060] ACPI: Power Resource [WRST] (off)
[ 0.241348] ACPI: Power Resource [WRST] (off)
[ 0.241632] ACPI: Power Resource [WRST] (off)
[ 0.250021] ACPI: Power Resource [FN00] (off)
[ 0.250070] ACPI: Power Resource [FN01] (off)
[ 0.250116] ACPI: Power Resource [FN02] (off)
[ 0.250162] ACPI: Power Resource [FN03] (off)
[ 0.250208] ACPI: Power Resource [FN04] (off)
[ 0.251069] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.251073] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.251098] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.251611] PCI host bridge to bus 0000:00
[ 0.251612] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.251613] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.251615] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.251615] pci_bus 0000:00: root bus resource [mem 0xc3000000-0xf7ffffff window]
[ 0.251616] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.251618] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.251624] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[ 0.251876] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[ 0.251885] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
[ 0.251889] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.251892] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.251904] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.252046] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.252065] pci 0000:00:14.0: reg 0x10: [mem 0xf7110000-0xf711ffff 64bit]
[ 0.252121] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.252243] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.252264] pci 0000:00:16.0: reg 0x10: [mem 0xf712d000-0xf712dfff 64bit]
[ 0.252325] pci 0000:00:16.0: PME# supported from D3hot
[ 0.252444] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.252458] pci 0000:00:17.0: reg 0x10: [mem 0xf7128000-0xf7129fff]
[ 0.252464] pci 0000:00:17.0: reg 0x14: [mem 0xf712c000-0xf712c0ff]
[ 0.252470] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.252476] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.252482] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.252488] pci 0000:00:17.0: reg 0x24: [mem 0xf712b000-0xf712b7ff]
[ 0.252522] pci 0000:00:17.0: PME# supported from D3hot
[ 0.252629] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[ 0.252681] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.252815] pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400
[ 0.252870] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.252992] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.253053] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.253193] pci 0000:00:1f.0: [8086:a148] type 00 class 0x060100
[ 0.253383] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.253395] pci 0000:00:1f.2: reg 0x10: [mem 0xf7124000-0xf7127fff]
[ 0.253522] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.253547] pci 0000:00:1f.3: reg 0x10: [mem 0xf7120000-0xf7123fff 64bit]
[ 0.253575] pci 0000:00:1f.3: reg 0x20: [mem 0xf7100000-0xf710ffff 64bit]
[ 0.253618] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.253768] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.253828] pci 0000:00:1f.4: reg 0x10: [mem 0xf712a000-0xf712a0ff 64bit]
[ 0.253896] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.254098] acpiphp: Slot [1] registered
[ 0.254101] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.254153] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.254179] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.254202] pci 0000:02:00.0: reg 0x18: [mem 0xf7004000-0xf7004fff 64bit]
[ 0.254217] pci 0000:02:00.0: reg 0x20: [mem 0xf7000000-0xf7003fff 64bit]
[ 0.254302] pci 0000:02:00.0: supports D1 D2
[ 0.254303] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254393] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.254395] pci 0000:00:1c.7: bridge window [io 0xe000-0xefff]
[ 0.254397] pci 0000:00:1c.7: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.254443] acpiphp: Slot [1-1] registered
[ 0.254446] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 0.256064] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.256102] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.256139] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.256175] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.256211] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.256248] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.256285] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.256321] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.256726] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.256726] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.256726] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.256726] vgaarb: loaded
[ 0.256726] pps_core: LinuxPPS API ver. 1 registered
[ 0.256726] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.256726] PTP clock support registered
[ 0.256726] EDAC MC: Ver: 3.0.0
[ 0.256726] Registered efivars operations
[ 0.262313] PCI: Using ACPI for IRQ routing
[ 0.269402] PCI: pci_cache_line_size set to 64 bytes
[ 0.269435] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.269436] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.269436] e820: reserve RAM buffer [mem 0xb2126000-0xb3ffffff]
[ 0.269437] e820: reserve RAM buffer [mem 0xb21f6000-0xb3ffffff]
[ 0.269438] e820: reserve RAM buffer [mem 0xbc723000-0xbfffffff]
[ 0.269439] e820: reserve RAM buffer [mem 0x23b000000-0x23bffffff]
[ 0.269753] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.269757] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.271270] clocksource: Switched to clocksource tsc-early
[ 0.277662] VFS: Disk quotas dquot_6.6.0
[ 0.277672] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.277740] AppArmor: AppArmor Filesystem Enabled
[ 0.277749] pnp: PnP ACPI init
[ 0.277928] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.277932] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278190] pnp 00:01: [dma 0 disabled]
[ 0.278221] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.278373] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.278374] system 00:02: [io 0xffff] has been reserved
[ 0.278376] system 00:02: [io 0xffff] has been reserved
[ 0.278377] system 00:02: [io 0xffff] has been reserved
[ 0.278378] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.278379] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.278381] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278448] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.278450] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278463] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.278486] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.278488] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.278645] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.278646] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.278647] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.278649] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.278650] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.278651] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.278652] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.278653] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.278654] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.278655] system 00:06: [mem 0xf7fc0000-0xf7fdffff] has been reserved
[ 0.278658] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278685] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.278686] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.278687] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.278689] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.278690] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.278691] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.278692] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.278694] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278919] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.278921] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279760] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.279761] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.279762] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.279764] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.280406] pnp: PnP ACPI: found 10 devices
[ 0.285737] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.285745] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.285748] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.285750] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.285760] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.285761] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.285763] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[ 0.285767] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc3000000-0xc31fffff]
[ 0.285771] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc3200000-0xc33fffff 64bit pref]
[ 0.285772] pci 0000:00:1d.0: BAR 14: assigned [mem 0xc3400000-0xc35fffff]
[ 0.285774] pci 0000:00:1d.0: BAR 15: assigned [mem 0xc3600000-0xc37fffff 64bit pref]
[ 0.285776] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.285777] pci 0000:00:1d.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.285780] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.285781] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.285784] pci 0000:00:1c.0: bridge window [mem 0xc3000000-0xc31fffff]
[ 0.285786] pci 0000:00:1c.0: bridge window [mem 0xc3200000-0xc33fffff 64bit pref]
[ 0.285790] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.285791] pci 0000:00:1c.7: bridge window [io 0xe000-0xefff]
[ 0.285794] pci 0000:00:1c.7: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.285798] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 0.285801] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
[ 0.285804] pci 0000:00:1d.0: bridge window [mem 0xc3400000-0xc35fffff]
[ 0.285806] pci 0000:00:1d.0: bridge window [mem 0xc3600000-0xc37fffff 64bit pref]
[ 0.285811] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.285812] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.285813] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.285814] pci_bus 0000:00: resource 7 [mem 0xc3000000-0xf7ffffff window]
[ 0.285815] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.285816] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.285817] pci_bus 0000:01: resource 1 [mem 0xc3000000-0xc31fffff]
[ 0.285817] pci_bus 0000:01: resource 2 [mem 0xc3200000-0xc33fffff 64bit pref]
[ 0.285818] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.285819] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[ 0.285820] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.285821] pci_bus 0000:03: resource 1 [mem 0xc3400000-0xc35fffff]
[ 0.285822] pci_bus 0000:03: resource 2 [mem 0xc3600000-0xc37fffff 64bit pref]
[ 0.285924] NET: Registered protocol family 2
[ 0.286036] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.286056] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.286127] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.286222] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.286245] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.286265] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.286306] NET: Registered protocol family 1
[ 0.286309] NET: Registered protocol family 44
[ 0.286315] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.293188] PCI: CLS 0 bytes, default 64
[ 0.293212] Unpacking initramfs...
[ 0.926431] Freeing initrd memory: 56376K
[ 0.926447] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.926448] software IO TLB: mapped [mem 0xac618000-0xb0618000] (64MB)
[ 0.926470] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02c4a121d, max_idle_ns: 440795236083 ns
[ 0.926481] clocksource: Switched to clocksource tsc
[ 0.926917] Initialise system trusted keyrings
[ 0.926924] Key type blacklist registered
[ 0.926954] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.927750] zbud: loaded
[ 0.927958] pstore: using deflate compression
[ 1.038571] Key type asymmetric registered
[ 1.038571] Asymmetric key parser 'x509' registered
[ 1.038577] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.038597] io scheduler noop registered
[ 1.038597] io scheduler deadline registered
[ 1.038615] io scheduler cfq registered (default)
[ 1.038616] io scheduler mq-deadline registered
[ 1.039015] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.039025] efifb: probing for efifb
[ 1.039033] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[ 1.039034] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.039034] efifb: scrolling: redraw
[ 1.039035] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.040180] Console: switching to colour frame buffer device 128x48
[ 1.041267] fb0: EFI VGA frame buffer device
[ 1.041273] intel_idle: MWAIT substates: 0x142120
[ 1.041274] intel_idle: v0.4.1 model 0x5E
[ 1.041393] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.041601] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.062548] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.063027] Linux agpgart interface v0.103
[ 1.063056] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.063056] AMD IOMMUv2 functionality not available on this system
[ 1.063323] i8042: PNP: No PS/2 controller found.
[ 1.063324] i8042: Probing ports directly.
[ 1.066644] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.066647] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.066767] mousedev: PS/2 mouse device common for all mice
[ 1.066798] rtc_cmos 00:04: RTC can wake from S4
[ 1.067254] rtc_cmos 00:04: registered as rtc0
[ 1.067268] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.067274] intel_pstate: Intel P-state driver initializing
[ 1.067479] intel_pstate: HWP enabled
[ 1.067498] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.067825] NET: Registered protocol family 10
[ 1.070463] Segment Routing with IPv6
[ 1.070475] mip6: Mobile IPv6
[ 1.070476] NET: Registered protocol family 17
[ 1.070535] mpls_gso: MPLS GSO support
[ 1.070847] microcode: sig=0x506e3, pf=0x2, revision=0xd6
[ 1.070951] microcode: Microcode Update Driver: v2.2.
[ 1.070958] sched_clock: Marking stable (1071586023, -637972)->(1074609233, -3661182)
[ 1.071128] registered taskstats version 1
[ 1.071128] Loading compiled-in X.509 certificates
[ 1.095382] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.095394] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.096030] Loaded UEFI:db cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' linked to secondary sys keyring
[ 1.096170] Loaded UEFI:db cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' linked to secondary sys keyring
[ 1.096186] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 1.096201] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 1.096419] Loaded UEFI:db cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[ 1.096917] zswap: loaded using pool lzo/zbud
[ 1.097078] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.097737] rtc_cmos 00:04: setting system clock to 2020-01-03 10:15:15 UTC (1578046515)
[ 1.371858] Freeing unused kernel image memory: 1584K
[ 1.381417] Write protecting the kernel read-only data: 16384k
[ 1.382712] Freeing unused kernel image memory: 2028K
[ 1.382937] Freeing unused kernel image memory: 836K
[ 1.387896] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.387896] x86/mm: Checking user space page tables
[ 1.392597] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.392597] Run /init as init process
[ 1.456549] button: module verification failed: signature and/or required key missing - tainting kernel
[ 1.456770] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.456777] ACPI: Sleep Button [SLPB]
[ 1.456884] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 1.456888] ACPI: Power Button [PWRB]
[ 1.456917] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.456924] ACPI: Power Button [PWRF]
[ 1.469435] ACPI: bus type USB registered
[ 1.469449] usbcore: registered new interface driver usbfs
[ 1.469453] usbcore: registered new interface driver hub
[ 1.469469] usbcore: registered new device driver usb
[ 1.469695] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 1.469731] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 1.472383] SCSI subsystem initialized
[ 1.476514] libata version 3.00 loaded.
[ 1.476754] cryptd: max_cpu_qlen set to 1000
[ 1.476857] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.476858] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.476959] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.476960] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.482843] ahci 0000:00:17.0: version 3.0
[ 1.482847] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.483234] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.483236] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 1.483561] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.483566] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.484629] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ 1.484632] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.484764] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.484765] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.484766] usb usb1: Product: xHCI Host Controller
[ 1.484767] usb usb1: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[ 1.484768] usb usb1: SerialNumber: 0000:00:14.0
[ 1.484840] hub 1-0:1.0: USB hub found
[ 1.484852] hub 1-0:1.0: 12 ports detected
[ 1.485643] AVX2 version of gcm_enc/dec engaged.
[ 1.485643] AES CTR mode by8 optimization enabled
[ 1.487292] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.487295] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.487297] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.487326] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 1.487328] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.487329] usb usb2: Product: xHCI Host Controller
[ 1.487330] usb usb2: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[ 1.487330] usb usb2: SerialNumber: 0000:00:14.0
[ 1.487396] hub 2-0:1.0: USB hub found
[ 1.487405] hub 2-0:1.0: 6 ports detected
[ 1.489129] libphy: r8169: probed
[ 1.489397] r8169 0000:02:00.0 eth0: RTL8168h/8111h, 30:5a:3a:7e:68:e4, XID 54100800, IRQ 122
[ 1.489398] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.499716] scsi host0: ahci
[ 1.499821] scsi host1: ahci
[ 1.499894] scsi host2: ahci
[ 1.499965] scsi host3: ahci
[ 1.500035] scsi host4: ahci
[ 1.500106] scsi host5: ahci
[ 1.500142] ata1: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b100 irq 120
[ 1.500144] ata2: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b180 irq 120
[ 1.500145] ata3: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b200 irq 120
[ 1.500146] ata4: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b280 irq 120
[ 1.500147] ata5: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b300 irq 120
[ 1.500149] ata6: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b380 irq 120
[ 1.513687] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 1.513688] fb: switching to inteldrmfb from EFI VGA
[ 1.513700] Console: switching to colour dummy device 80x25
[ 1.513750] [drm] Replacing VGA console driver
[ 1.514263] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.514264] [drm] Driver supports precise vblank timestamp query.
[ 1.514628] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.514660] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_27.bin
[ 1.514925] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[ 1.784615] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 1.785739] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.785923] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.804264] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 1.807322] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.807361] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.807517] ata3: SATA link down (SStatus 4 SControl 300)
[ 1.807530] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.807547] ata6: SATA link down (SStatus 4 SControl 300)
[ 1.808031] ata4.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[ 1.808032] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.808476] ata2.00: ATA-9: CT250BX100SSD1, MU02, max UDMA/133
[ 1.808477] ata2.00: 488397168 sectors, multi 2: LBA48 NCQ (depth 32), AA
[ 1.808780] ata4.00: configured for UDMA/133
[ 1.809045] ata2.00: configured for UDMA/133
[ 1.812930] fbcon: inteldrmfb (fb0) is primary device
[ 1.830779] Console: switching to colour frame buffer device 240x67
[ 1.850588] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.944908] usb 1-5: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
[ 1.944913] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.944917] usb 1-5: Product: USB2.0 Hub
[ 1.944921] usb 1-5: Manufacturer: GenesysLogic
[ 1.946528] hub 1-5:1.0: USB hub found
[ 1.948047] hub 1-5:1.0: 4 ports detected
[ 2.050578] usb 2-5: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2.065647] usb 2-5: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice=92.24
[ 2.065653] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.065656] usb 2-5: Product: USB3.0 Hub
[ 2.065660] usb 2-5: Manufacturer: GenesysLogic
[ 2.067125] hub 2-5:1.0: USB hub found
[ 2.067494] hub 2-5:1.0: 4 ports detected
[ 2.177323] usb 1-6: new low-speed USB device number 3 using xhci_hcd
[ 2.307215] usb 1-6: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[ 2.307221] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.307225] usb 1-6: Product: USB Optical Mouse
[ 2.307228] usb 1-6: Manufacturer: Logitech
[ 2.314224] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.316255] usbcore: registered new interface driver usbhid
[ 2.316256] usbhid: USB HID core driver
[ 2.316862] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0001/input/input7
[ 2.316945] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0
[ 2.369331] usb 1-5.4: new full-speed USB device number 4 using xhci_hcd
[ 2.447553] usb 1-5.4: New USB device found, idVendor=0c76, idProduct=161f, bcdDevice= 1.00
[ 2.447559] usb 1-5.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.447562] usb 1-5.4: Product: USB PnP Audio Device
[ 2.451436] input: USB PnP Audio Device as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.4/1-5.4:1.3/0003:0C76:161F.0002/input/input8
[ 2.503494] hid-generic 0003:0C76:161F.0002: input,hidraw1: USB HID v1.00 Device [USB PnP Audio Device] on usb-0000:00:14.0-5.4/input3
[ 2.561332] usb 1-7: new full-speed USB device number 5 using xhci_hcd
[ 2.692486] usb 1-7: New USB device found, idVendor=045e, idProduct=07b2, bcdDevice= 7.46
[ 2.692491] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.692495] usb 1-7: Product: Microsoft® 2.4GHz Transceiver v8.0
[ 2.692499] usb 1-7: Manufacturer: Microsoft
[ 2.699182] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07B2.0003/input/input9
[ 2.750666] hid-generic 0003:045E:07B2.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-7/input0
[ 2.755435] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:045E:07B2.0004/input/input10
[ 2.755664] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:045E:07B2.0004/input/input11
[ 2.755826] hid-generic 0003:045E:07B2.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-7/input1
[ 2.762408] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.2/0003:045E:07B2.0005/input/input12
[ 2.814438] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.2/0003:045E:07B2.0005/input/input14
[ 2.814775] hid-generic 0003:045E:07B2.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-7/input2
[ 2.928334] usb 1-8: new full-speed USB device number 6 using xhci_hcd
[ 3.057074] usb 1-8: New USB device found, idVendor=046d, idProduct=c246, bcdDevice=70.03
[ 3.057079] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.057083] usb 1-8: Product: G300s Optical Gaming Mouse
[ 3.057086] usb 1-8: Manufacturer: Logitech
[ 3.060529] input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C246.0006/input/input15
[ 3.060848] hid-generic 0003:046D:C246.0006: input,hidraw5: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-8/input0
[ 3.062703] input: Logitech G300s Optical Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C246.0007/input/input16
[ 3.114425] input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C246.0007/input/input17
[ 3.114773] hid-generic 0003:046D:C246.0007: input,hiddev1,hidraw6: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-8/input1
[ 3.708861] ata1: SATA link down (SStatus 1 SControl 300)
[ 3.709224] scsi 1:0:0:0: Direct-Access ATA CT250BX100SSD1 MU02 PQ: 0 ANSI: 5
[ 3.709872] scsi 3:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[ 3.716502] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 3.716505] sd 1:0:0:0: [sda] Write Protect is off
[ 3.716506] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.716510] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.716592] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.716593] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 3.716596] sd 3:0:0:0: [sdb] Write Protect is off
[ 3.716597] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.716602] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.718683] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[ 3.718997] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.777321] sdb: sdb1 sdb2 sdb3