I had some serious issues with my previous Ubuntu installation so I decided to do a reinstall. Virtual box worked just fine on the old install provided I used some prehistoric kernel version. I installed it this time, got the usual headers error and some usb error. I resolved those and all should be dandy.
However whenever I go to start the virtual machine, it freezes at some point. Its the same virtual machine I used before (which I created on my windows computer and then copied over to the linux machine months ago. Its worked just fine since then) but now its not starting at all, it just freezes.
I'm not quite sure why, but there is a fair bit of stuff installed in there already that it would be a shame to have to start all over again.
I've attached the end of the log from the machine, its the same every time it boots. If there is anything else needed or more of the log file, please let me know:
Currently running:
Ubuntu Hardy Hero
Kernel: 2.6.24-19-generic
Code: Select all
00:00:05.386 ******************** End of CPUID dump **********************
00:00:05.440 TM: cTSCTicksPerSecond=0x775b7b20 (2002484000) fTSCVirtualized=true fTSCUseRealTSC=false fMaybeUseOffsettedHostTSC=false
00:00:05.440 CoreCode: R3=b337d000 R0=fab7d000 GC=a039b000 Phys=0000000019d5a000 cb=0x2000
00:00:05.455 SUP: Loaded VBoxDDR0.r0 (/usr/lib/virtualbox/VBoxDDR0.r0) at 0xfacb2060 - ModuleInit at 00000000 and ModuleTerm at 00000000
00:00:05.456 SUP: Loaded VBoxDD2R0.r0 (/usr/lib/virtualbox/VBoxDD2R0.r0) at 0xfabfc060 - ModuleInit at 00000000 and ModuleTerm at 00000000
00:00:05.456 Activating Local APIC
00:00:05.456 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:05.460 Shared Folders service loaded.
00:00:05.472 PIIX3 ATA: LUN#0: disk, PCHS=16383/16/63, total number of sectors 16777216
00:00:05.472 PIIX3 ATA: LUN#1: no unit
00:00:05.472 PIIX3 ATA: LUN#2: CD/DVD, total number of sectors 0, passthrough disabled
00:00:05.472 PIIX3 ATA: LUN#3: no unit
00:00:05.472 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:05.572 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:05.573 NAT: DNS address: 192.168.0.1
00:00:05.576 DevPcBios: ATA LUN#0 LCHS=1024/255/63
00:00:05.584 HWACCM: No VMX or SVM CPU extension found. Reason VERR_SVM_NO_SVM
00:00:05.584 HWACCM: VMX MSR_IA32_FEATURE_CONTROL=0
00:00:05.592 VM: Halt method global1 (5)
00:00:05.592 Changing the VM state from 'CREATING' to 'CREATED'.
00:00:05.592 Changing the VM state from 'CREATED' to 'RUNNING'.
00:00:05.607 Guest Log: BIOS: VirtualBox 1.6.4
00:00:05.608 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:05.626 PIIX3 ATA: Ctl#0: RESET, DevSel=0 AIOIf=0 CmdIf0=0x00 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:05.626 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:05.627 Guest Log: BIOS: ata0-0: PCHS=16383/16/63 LCHS=1024/255/63
00:00:05.628 PIIX3 ATA: Ctl#1: RESET, DevSel=0 AIOIf=0 CmdIf0=0x00 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:05.628 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:05.628 PIT: mode=2 count=0x48d3 (18643) - 64.00 Hz (ch=0)
00:00:05.634 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=b195a000 w=640 h=480 bpp=32 cbLine=0xA00
00:00:08.104 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:08.105 Guest Log: BIOS: Boot from Floppy 0 failed
00:00:08.106 Guest Log: BIOS: CDROM boot failure code : 0003
00:00:08.106 Guest Log: BIOS: Boot from CD-ROM failed
00:00:08.106 Guest Log: BIOS: Booting from Hard Disk...
00:00:08.112 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00000000 w=720 h=400 bpp=0 cbLine=0x0
00:00:08.304 Guest Log: BIOS: int13_harddisk: function 15, unmapped device for ELDL=81