virtualbox.org

I have a VHD with Windows Server 2008 x64 bit + SQL Server 2008 that I downloaded from the Microsoft website as a VHD. I created a virtual machine from it, ran it in Hyper V on Windows 10 education, did an installation for an application and then turned off the machine. I then copied the hard disk file onto another computer with Windows 10 home and created a virtual machine from it in virtual box. The machine keeps looping with a windows failed to startup screen, where the options are to a) load system recovery options or b) start windows normally. If i start windows normally, it goes to a BSoD. Any ideas how to fix this or what the problem is?

The first machine has 16 GB of RAM and then second has 8 GB of RAM. I've given the VM 4 GB on both machines (i7 both of them, the second machine with a newer generation, I think 4th). Specs shouldn't be an issue.

I've copied and pasted a portion of the log file below to make it easier (File size is too big anyways, and the rest basically repeats) and attached the BSoD.

Thanks in Advance

Code: Select all

00:18:08.613883 VMMDev: Guest Log: BIOS: Boot : bseqnr=1, bootseq=0231
00:18:08.614202 VMMDev: Guest Log: BIOS: Boot from Floppy 0 failed
00:18:08.614553 VMMDev: Guest Log: BIOS: Boot : bseqnr=2, bootseq=0023
00:18:08.615622 VMMDev: Guest Log: BIOS: CDROM boot failure code : 0003
00:18:08.615913 VMMDev: Guest Log: BIOS: Boot from CD-ROM failed
00:18:08.616348 VMMDev: Guest Log: BIOS: Boot : bseqnr=3, bootseq=0002
00:18:08.629325 VMMDev: Guest Log: BIOS: Booting from Hard Disk...
00:18:09.089719 Display::handleDisplayResize: uScreenId=0 pvVRAM=000000000b820000 w=1024 h=768 bpp=24 cbLine=0xC00 flags=0x0
00:18:09.089838 GUI: UIFrameBufferPrivate::NotifyChange: Screen=0, Origin=0x0, Size=1024x768, Sending to async-handler
00:18:09.089904 GUI: UIMachineView::sltHandleNotifyChange: Screen=0, Size=1024x768
00:18:09.089922 GUI: UIFrameBufferPrivate::handleNotifyChange: Size=1024x768
00:18:09.090140 GUI: UIFrameBufferPrivate::performResize: Size=1024x768, Directly using source bitmap content
00:18:13.830791 GIM: HyperV: Guest OS reported ID 0x1040601011db1
00:18:13.830828 GIM: HyperV: Open-source=false Vendor=0x1 OS=0x4 (Windows NT or derivative) Major=6 Minor=1 ServicePack=1 Build=7601
00:18:13.830890 GIM: HyperV: Enabled hypercall page at 0x0000000005c68000
00:18:13.830937 GIM: HyperV: Enabled TSC page at 0x0000000005c69000 - u64TscScale=0xfca51500000000 u64TscKHz=0x2794cd (2 593 997) Seq=1
00:18:13.830958 TM: Switching TSC mode from 'Dynamic' to 'RealTscOffset'
00:18:13.838884 Display::handleDisplayResize: uScreenId=0 pvVRAM=000000000b820000 w=640 h=480 bpp=0 cbLine=0x140 flags=0x0
00:18:13.838987 GUI: UIFrameBufferPrivate::NotifyChange: Screen=0, Origin=0x0, Size=640x480, Sending to async-handler
00:18:13.839124 GUI: UIMachineView::sltHandleNotifyChange: Screen=0, Size=640x480
00:18:13.839152 GUI: UIFrameBufferPrivate::handleNotifyChange: Size=640x480
00:18:13.839918 GUI: UIFrameBufferPrivate::performResize: Size=640x480, Directly using source bitmap content
00:18:15.182824 GIM: HyperV: Reset initiated through MSR
00:18:15.182896 Changing the VM state from 'RUNNING' to 'RESETTING'
00:18:15.182973 GIM: HyperV: Resetting MMIO2 regions and MSRs
00:18:15.183163 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:18:15.186041 AHCI#0: Reset the HBA
00:18:15.186066 VD#0: Cancelling all active requests
00:18:15.436228 HDA: Codec reset
00:18:15.436287 HDA: Reset
00:18:15.438461 TM: Switching TSC mode from 'RealTscOffset' to 'Dynamic'
00:18:15.558971 Changing the VM state from 'RESETTING' to 'RUNNING'
00:18:15.559016 OHCI: root hub reset completed with VINF_SUCCESS
00:18:15.562119 VMMDev: Guest Log: BIOS: VirtualBox 5.2.20
00:18:15.562217 PCI: setting up resources and interrupts
00:18:15.563044 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:18:15.576950 VMMDev: Guest Log: CPUID EDX: 0x078bfbff
00:18:15.582888 Display::handleDisplayResize: uScreenId=0 pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0 flags=0x0
00:18:15.582962 GUI: UIFrameBufferPrivate::NotifyChange: Screen=0, Origin=0x0, Size=720x400, Sending to async-handler
00:18:15.583019 GUI: UIMachineView::sltHandleNotifyChange: Screen=0, Size=720x400
00:18:15.583035 GUI: UIFrameBufferPrivate::handleNotifyChange: Size=720x400
00:18:15.583205 GUI: UIFrameBufferPrivate::performResize: Size=720x400, Directly using source bitmap content
00:18:15.587849 AHCI#0: Reset the HBA
00:18:15.587903 VD#0: Cancelling all active requests
00:18:15.587964 AHCI#0: Port 0 reset
00:18:15.588015 VD#0: Cancelling all active requests
00:18:15.588645 VMMDev: Guest Log: BIOS: AHCI 0-P#0: PCHS=16383/16/63 LCHS=1024/255/63 0x000000000c800000 sectors
00:18:15.588719 AHCI#0: Port 1 reset
00:18:15.590430 PIT: mode=2 count=0x48d3 (18643) - 64.00 Hz (ch=0)
00:18:15.603901 Display::handleDisplayResize: uScreenId=0 pvVRAM=000000000b820000 w=640 h=480 bpp=32 cbLine=0xA00 flags=0x0
00:18:15.603980 GUI: UIFrameBufferPrivate::NotifyChange: Screen=0, Origin=0x0, Size=640x480, Sending to async-handler
00:18:15.604081 GUI: UIMachineView::sltHandleNotifyChange: Screen=0, Size=640x480
00:18:15.604122 GUI: UIFrameBufferPrivate::handleNotifyChange: Size=640x480
00:18:15.604421 GUI: UIFrameBufferPrivate::performResize: Size=640x480, Directly using source bitmap content
00:18:18.061853 Display::handleDisplayResize: uScreenId=0 pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0 flags=0x0
00:18:18.061962 GUI: UIFrameBufferPrivate::NotifyChange: Screen=0, Origin=0x0, Size=720x400, Sending to async-handler
00:18:18.062024 GUI: UIMachineView::sltHandleNotifyChange: Screen=0, Size=720x400
00:18:18.062043 GUI: UIFrameBufferPrivate::handleNotifyChange: Size=720x400
00:18:18.062052 GUI: UIFrameBufferPrivate::performResize: Size=720x400, Directly using source bitmap content
00:18:18.087884 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:18:18.088261 VMMDev: Guest Log: BIOS: Boot : bseqnr=1, bootseq=0231
00:18:18.088698 VMMDev: Guest Log: BIOS: Boot from Floppy 0 failed
00:18:18.089080 VMMDev: Guest Log: BIOS: Boot : bseqnr=2, bootseq=0023
00:18:18.090075 VMMDev: Guest Log: BIOS: CDROM boot failure code : 0003
00:18:18.090426 VMMDev: Guest Log: BIOS: Boot from CD-ROM failed
00:18:18.090771 VMMDev: Guest Log: BIOS: Boot : bseqnr=3, bootseq=0002
00:18:18.159134 VMMDev: Guest Log: BIOS: Booting from Hard Disk...
00:18:18.638270 Display::handleDisplayResize: uScreenId=0 pvVRAM=000000000b820000 w=1024 h=768 bpp=24 cbLine=0xC00 flags=0x0
00:18:18.638486 GUI: UIFrameBufferPrivate::NotifyChange: Screen=0, Origin=0x0, Size=1024x768, Sending to async-handler
00:18:18.638590 GUI: UIMachineView::sltHandleNotifyChange: Screen=0, Size=1024x768
00:18:18.638609 GUI: UIFrameBufferPrivate::handleNotifyChange: Size=1024x768
00:18:18.638618 GUI: UIFrameBufferPrivate::performResize: Size=1024x768, Directly using source bitmap content
00:18:22.153278 VideoRec: Disabling
00:18:22.153705 VideoRec: Stopping ...
00:18:22.516900 VideoRec: Recording screen #0 stopped
00:18:22.616522 VideoRec: Closed file 'C:\Users\Alessandro Vedalit\VirtualBox VMs\eschool2\eschool2-2018-10-23T14-31-59-165086400Z.webm'
00:18:22.956791 GUI: UIMediumEnumerator: Medium-enumeration finished!
00:18:58.148748 GIM: HyperV: Guest OS reported ID 0x1040601011db1
00:18:58.148778 GIM: HyperV: Open-source=false Vendor=0x1 OS=0x4 (Windows NT or derivative) Major=6 Minor=1 ServicePack=1 Build=7601
00:18:58.148806 GIM: HyperV: Enabled hypercall page at 0x000000001106a000
00:18:58.148830 GIM: HyperV: Enabled TSC page at 0x000000001106b000 - u64TscScale=0xfca51500000000 u64TscKHz=0x2794cd (2 593 997) Seq=1
00:18:58.148839 TM: Switching TSC mode from 'Dynamic' to 'RealTscOffset'
00:18:58.170205 Display::handleDisplayResize: uScreenId=0 pvVRAM=000000000b820000 w=640 h=480 bpp=0 cbLine=0x140 flags=0x0
00:18:58.170292 GUI: UIFrameBufferPrivate::NotifyChange: Screen=0, Origin=0x0, Size=640x480, Sending to async-handler
00:18:58.170351 GUI: UIMachineView::sltHandleNotifyChange: Screen=0, Size=640x480
00:18:58.170367 GUI: UIFrameBufferPrivate::handleNotifyChange: Size=640x480
00:18:58.170375 GUI: UIFrameBufferPrivate::performResize: Size=640x480, Directly using source bitmap content
00:18:58.868812 AHCI#0: Reset the HBA
00:18:58.868848 VD#0: Cancelling all active requests
00:18:59.479318 HDA: Codec reset
00:18:59.479367 HDA: Reset
00:18:59.506264 HDA: Codec reset
00:18:59.506317 HDA: Reset
00:18:59.552352 OHCI: Software reset
00:18:59.552594 OHCI: USB Reset
00:18:59.631276 OHCI: USB Operational
00:19:00.745954 Display::handleDisplayResize: uScreenId=0 pvVRAM=000000000b820000 w=800 h=600 bpp=32 cbLine=0xC80 flags=0x0
00:19:00.746018 GUI: UIFrameBufferPrivate::NotifyChange: Screen=0, Origin=0x0, Size=800x600, Sending to async-handler
00:19:00.746103 GUI: UIMachineView::sltHandleNotifyChange: Screen=0, Size=800x600
00:19:00.746119 GUI: UIFrameBufferPrivate::handleNotifyChange: Size=800x600
00:19:00.746280 GUI: UIFrameBufferPrivate::performResize: Size=800x600, Directly using source bitmap content
00:19:02.064366 Display::handleDisplayResize: uScreenId=0 pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0 flags=0x0
00:19:02.064528 GUI: UIFrameBufferPrivate::NotifyChange: Screen=0, Origin=0x0, Size=720x400, Sending to async-handler
00:19:02.064616 GUI: UIMachineView::sltHandleNotifyChange: Screen=0, Size=720x400
00:19:02.064633 GUI: UIFrameBufferPrivate::handleNotifyChange: Size=720x400
00:19:02.064661 GUI: UIFrameBufferPrivate::performResize: Size=720x400, Directly using source bitmap content
00:19:02.095840 Display::handleDisplayResize: uScreenId=0 pvVRAM=000000000b820000 w=800 h=600 bpp=32 cbLine=0xC80 flags=0x0
00:19:02.095922 GUI: UIFrameBufferPrivate::NotifyChange: Screen=0, Origin=0x0, Size=800x600, Sending to async-handler
00:19:02.096012 GUI: UIMachineView::sltHandleNotifyChange: Screen=0, Size=800x600
00:19:02.096031 GUI: UIFrameBufferPrivate::handleNotifyChange: Size=800x600
00:19:02.096200 GUI: UIFrameBufferPrivate::performResize: Size=800x600, Directly using source bitmap content

Partial logs are not useful. Please edit your previous post, deleted the pasted log, and post the complete log as a ZIPPED attachment.

Falas wrote:I then copied the hard disk file onto another computer with Windows 10 home and created a virtual machine from it in virtual box.

Can't you compare the working and the non-working VM settings?
You could copy the whole VM folder (VM settings included) from the old computer to the new one, as described in the FAQ: Moving a VM.

Stop 0x7B is typically a "missing boot device" because the installation doesn't have the correct disk controller driver for the current setup.
You could try to attach the VHD to an virtual IDE controller instead of SATA, or maybe SCSI.