Could not share folders on Win XP Host & Guest. VB 1.6.4

Discussions related to using VirtualBox on Windows hosts.
skc
Posts: 6
Joined: 5. Aug 2008, 22:40

Could not share folders on Win XP Host & Guest. VB 1.6.4

Post by skc »

Hello

Host & Guest : Windows XP Pro SP2
Single PC connected to external DSL modem/router
2 SATA Drives

I installed VB 1.6.4. First time (no previous version)
Also installed VB Guest Additions inside the guest

One VM only.
Administrator user.
All fairly standard setup:
- Enable : IO APIC, VT-x/AMD-V
- Disabled SATA Controller (Enabling made no difference)
- Network Adapter 0 : Enabled, PCnet-FAST III (Am79C973), NAT, Cable Connected

Could not share folder (transient or permanent)
I used the GUI and also tried VboxManage and 'Net' commands in the host and guest.
In the guest, windows explorer, under “My Networking Places” > “Entire Network” > “VirtualBox Shared Folders”, there is Nothing. I understand that the shared folders would show up there. I read the instructions carefully and followed it using the GUI and the command line but Nothing appeared under VirtualBox Shared Folders.

Also something strange happened. The VM did crash at least once for no apparent reason. I Removed the folder sharing in the GUI. After sometime, I renamed the folder that was supposed to be shared in the host to something else. After starting VB, the left panel had a red 'X' on the VM and the right one had a message requesting to Delete the VM because a shared folder name 'xxxxx' was not found in the host!. VB refused to start the VM and only offered to Delete it!. After some investigation, I found that the VM's xml file in (C:\Documents and Settings\Administrator\.VirtualBox\Machines..) had a line with a reference to that non-existing shared folder. So I deleted that line. Then VB started the VM normally.
VB should never refuse to run the VM and offer to delete it just becasue it couldn't find a shared folder, it should just give a warning only and continue with loading the VM.

Any help appreciated

TIA
TerryE
Volunteer
Posts: 3572
Joined: 28. May 2008, 08:40
Primary OS: Ubuntu other
VBox Version: VirtualBox+Oracle ExtPack
Guest OSses: Ubuntu 10.04 & 11.10, both Svr&Wstn, Debian, CentOS
Contact:

Post by TerryE »

Default Firewall settings ?
Read the Forum Posting Guide
Google your Q site:VirtualBox.org or search for the answer before posting.
skc
Posts: 6
Joined: 5. Aug 2008, 22:40

Post by skc »

In the guest, windows firewall is disabled. No software installed (except VB Guest Additions) or components added to windows.
In the host, I have Outpost FW and KAV. I turned off my modem and shut down the FW and KAV. Did the same testing with rebooting the VM and the host but same results.
skc
Posts: 6
Joined: 5. Aug 2008, 22:40

Post by skc »

Hello

I got Internet and USB working in the VM after little struggle.

BTW, I installed VirtualPC2007SP1. Its folder sharing and internet worked instantly. Which means no problems in my side I hope. It supports a lousy 8 mb VRAM. No USB. And VB and VPC wont run together.

I still cant get folder sharing working in VB. I tried un&re installing the Guest Additions but no luck.

Any help please ?
Last edited by skc on 8. Aug 2008, 14:20, edited 1 time in total.
TerryE
Volunteer
Posts: 3572
Joined: 28. May 2008, 08:40
Primary OS: Ubuntu other
VBox Version: VirtualBox+Oracle ExtPack
Guest OSses: Ubuntu 10.04 & 11.10, both Svr&Wstn, Debian, CentOS
Contact:

Post by TerryE »

I keep emphasising that in my view the current cludgy Network implementation is the weakest area of VBox compared to alternative VM offerings.
Read the Forum Posting Guide
Google your Q site:VirtualBox.org or search for the answer before posting.
emn8w8
Posts: 45
Joined: 27. Mar 2008, 18:15
Primary OS: openSUSE
VBox Version: VirtualBox+Oracle ExtPack
Guest OSses: OS/2 (Warp 4-4.52), eComStation (1.2...2.0RC7, IBM PC_DOS, Windows XP
Location: Netherlands

Post by emn8w8 »

Hi,

I encountered the same problem while using VirtualBox 1.6.4: XP as guest (on Linux host system) refused to make a connection to it's shared folder(s). Quick & dirty workaround:
Uninstall VBoxGuestAdditions 1.6.4 and install VBoxGuestAdditions 1.6.2. This solved the problem (at last for me)

Best regards, Erik
skc
Posts: 6
Joined: 5. Aug 2008, 22:40

Post by skc »

Thanks! It works! :D

1.6.2 Does work while 1.6.4 Doesnt !

Another idea I made: I uninstalled 1.6.4 (actually reverted to a clean snapshot) then installed 1.6.2 then installed 1.6.4 on top of it!

I tested that one time with rebooting (after 1.6.2) and another time without rebooting the VM. They both worked. I prefer without rebooting.

"Add or Remove Programs" says 1.6.4 is installed. I checked the installed files in the VM and they have the same date as the files in 1.6.4 iso

Here is the link for it in case someone else needs it (it took me a while to find it in the forum) :
Download http://www.virtualbox.org/download/1.6. ... _1.6.2.iso
or http://www.virtualbox.org/download

Thanks and Really Appreciate it. God bless you.
emn8w8
Posts: 45
Joined: 27. Mar 2008, 18:15
Primary OS: openSUSE
VBox Version: VirtualBox+Oracle ExtPack
Guest OSses: OS/2 (Warp 4-4.52), eComStation (1.2...2.0RC7, IBM PC_DOS, Windows XP
Location: Netherlands

Post by emn8w8 »

YW...and don't mention it...:-)
Glad I could help..
VirtualBox is a major Work In Progress...and sometimes little things go wrong...:-)
frank
Oracle Corporation
Posts: 3362
Joined: 7. Jun 2007, 09:11
Primary OS: Debian Sid
VBox Version: VirtualBox+Oracle ExtPack
Guest OSses: Linux, Windows
Location: Dresden, Germany
Contact:

Post by frank »

We are really trying hard to reproduce this problem but have no success so far. Please could you add comments to http://www.virtualbox.org/ticket/1915? Actually your guest configuration might be important: Which guest Windows language is that? Do you have any special software installed inside the guest (virus scanner, registry tuner, ...)? Is you WinSP3 fully patched?
emn8w8
Posts: 45
Joined: 27. Mar 2008, 18:15
Primary OS: openSUSE
VBox Version: VirtualBox+Oracle ExtPack
Guest OSses: OS/2 (Warp 4-4.52), eComStation (1.2...2.0RC7, IBM PC_DOS, Windows XP
Location: Netherlands

Post by emn8w8 »

Sure, no problem...
I see I i'm a bit off-topic here, since it happened on a Linux host with a Windows guest.
And don't work too hard on this subject; since it can be easily corrected it's no big issue to me..:-)

Thanks and best regards,
Erik
smartcat99s
Posts: 1
Joined: 16. Aug 2008, 20:55

Post by smartcat99s »

I encountered this issue with a Linux host (2.6.25 and 2.6.27-rc2/3) after upgrading my 1.5.6 VM to 1.6.4 and letting the installer uninstall the 1.5.x VM tools.

Completely uninstalling and reinstalling the additions worked for me.
Installing 1.6.2 additions on top of 1.6.4 additions did not work though

Guest Config:
XP Pro SP3 (English)
avast! Home
VS2008 installed
VT disabled
1GB ram, 20GB IDE drive, ALSA sound, no APIC
jayy
Posts: 2
Joined: 23. Aug 2008, 06:36

I have the same problem still

Post by jayy »

Hi

I have the same problem as the first post - I just installed Virtual Box 1.6.4 on Windows Vista SP1 and then installed XP pro on the VM - everything was pretty much default settings. I installed guest additions and no shared folder showed up even though I had designated one. I uninstalled guest additions and installed guest additions 1.6.2 as suggested in one of the posts but still no shared folder showed up! I've tried adding and deleting various shared folders, lots of reboots etc but still nothing.

If anyone could suggest why this is happening or how I can fix it I'd really appreciate it!

Thanks,
J
Bundy
Posts: 1
Joined: 24. Aug 2008, 10:16

Post by Bundy »

I had the same problem - I couldn't share folders or use network. Installing 1.6.2 solved problems. Both XP sp2 (host/guest).
boxuser2009
Posts: 1
Joined: 24. Aug 2008, 18:53

Post by boxuser2009 »

skc wrote:Thanks! It works! :D

1.6.2 Does work while 1.6.4 Doesnt !

Another idea I made: I uninstalled 1.6.4 (actually reverted to a clean snapshot) then installed 1.6.2 then installed 1.6.4 on top of it!

I tested that one time with rebooting (after 1.6.2) and another time without rebooting the VM. They both worked. I prefer without rebooting.

"Add or Remove Programs" says 1.6.4 is installed. I checked the installed files in the VM and they have the same date as the files in 1.6.4 iso

Here is the link for it in case someone else needs it (it took me a while to find it in the forum) :
Download http://www.virtualbox.org/download/1.6. ... _1.6.2.iso
or http://www.virtualbox.org/download

Thanks and Really Appreciate it. God bless you.
yes, it solved thanks
jayy
Posts: 2
Joined: 23. Aug 2008, 06:36

Post by jayy »

I still can't get this to work. Any suggestions? Could Vista Ultimate being the host OS have anything to do with it?

Do I need to set or change any permissions in windows?

Thanks in advance.

J
Post Reply