virtualbox.org

Installed VirtualBox 5.1.28 and Guest Additions in an Ubuntu 16.04 LTS Server. No GUI. Hardware: Dell FS7-NV12, with 2 x AMD QuadCore Opteron 2,.Mhz CPU, 64 GB RAM, 1 x PERC6 SCSI Boards, 8 SCSI HardDrives (300 GB each). AMD VT Enabled. VIrtualbox Server Works Ok. Managed remotely via Remotebox 2.23.
Exported an Oracle Linux 64 VM Manager 3.3 Appliance to OVA. The Appliance functions without issues in a Laptop with 1 x QuadCore Core I7 CPU, Ubutu Desktop 17.04, 8GB RAM, 128 GB SSD Disk. In this machine also have other appliances (Windows 7, Windows 10, Udbuntu Servers) all work without problems.
Imported the appliance in the Headless Server. VBoxManager starts the VMachine, no error messages. Suddenly the server hangs displays :'NMI WatchDog: BUG: soft lockup - CPU#0 Stuck for 22s'
Downloaded Oracle VM Manager Templates. Imported Ok, but same results when running.

Code: Select all

VBoxManage list -l vms:
Name:            S-Men006-001
Groups:          /
Guest OS:        Oracle (64-bit)
UUID:            f24d6714-9d28-4759-9633-26cbc16000dc
Config file:     /data/Virtualbox/VirtualBox_VMs/S-Men006-001/S-Men006-001.vbox
Snapshot folder: /data/Virtualbox/VirtualBox_VMs/S-Men006-001/Snapshots
Log folder:      /data/Virtualbox/VirtualBox_VMs/S-Men006-001/Logs
Hardware UUID:   f24d6714-9d28-4759-9633-26cbc16000dc
Memory size:     4096MB
Page Fusion:     off
VRAM size:       12MB
CPU exec cap:    100%
HPET:            off
Chipset:         piix3
Firmware:        BIOS
Number of CPUs:  2
PAE:             on
Long Mode:       on
Triple Fault Reset: off
APIC:            on
X2APIC:          off
CPUID Portability Level: 0
CPUID overrides: None
Boot menu mode:  message and menu
Boot Device (1): Floppy
Boot Device (2): DVD
Boot Device (3): HardDisk
Boot Device (4): Not Assigned
ACPI:            on
IOAPIC:          on
BIOS APIC mode:  APIC
Time offset:     0ms
RTC:             UTC
Hardw. virt.ext: on
Nested Paging:   off
Large Pages:     off
VT-x VPID:       off
VT-x unr. exec.: on
Paravirt. Provider: Legacy
Effective Paravirt. Provider: None
State:           powered off (since 2017-09-26T17:24:07.000000000)
Monitor count:   1
3D Acceleration: off
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: off
Allow Tracing to Access VM: off
Tracing Configuration:
Autostart Enabled: off
Autostart Delay: 0
Default Frontend:
Storage Controller Name (0):            IDE Controller
Storage Controller Type (0):            PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0):  2
Storage Controller Port Count (0):      2
Storage Controller Bootable (0):        on
Storage Controller Name (1):            SATA Controller
Storage Controller Type (1):            IntelAhci
Storage Controller Instance Number (1): 0
Storage Controller Max Port Count (1):  30
Storage Controller Port Count (1):      2
Storage Controller Bootable (1):        on
IDE Controller (1, 0): Empty
SATA Controller (0, 0): /data/Virtualbox/VirtualBox_VMs/S-Men006-001/S-Men006-001-disk001.vmdk (UUID: 53760f94-8ddb-47e6-9434-1400abd3a2fc)
SATA Controller (1, 0): /data/Virtualbox/VirtualBox_VMs/S-Men006-001/S-Men006-001-disk002.vmdk (UUID: f811bb54-6182-41e4-bf71-555e4f165f10)
NIC 1:           MAC: 0800273CE0F4, Attachment: Bridged Interface 'eth0', Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: allow-all, Bandwidth group: none
NIC 2:           disabled
NIC 3:           disabled
NIC 4:           disabled
NIC 5:           disabled
NIC 6:           disabled
NIC 7:           disabled
NIC 8:           disabled
Pointing Device: PS/2 Mouse
Keyboard Device: PS/2 Keyboard
UART 1:          disabled
UART 2:          disabled
UART 3:          disabled
UART 4:          disabled
LPT 1:           disabled
LPT 2:           disabled
Audio:           enabled (Driver: ALSA, Controller: AC97, Codec: STAC9700)
Clipboard Mode:  Bidirectional
Drag and drop Mode: disabled
VRDE:            enabled (Address 0.0.0.0, Ports 3389, MultiConn: on, ReuseSingleConn: off, Authentication type: null)
Video redirection: disabled
VRDE property: TCP/Ports  = "3389"
VRDE property: TCP/Address = <not set>
VRDE property: VideoChannel/Enabled = <not set>
VRDE property: VideoChannel/Quality = "75"
VRDE property: VideoChannel/DownscaleProtection = <not set>
VRDE property: Client/DisableDisplay = <not set>
VRDE property: Client/DisableInput = <not set>
VRDE property: Client/DisableAudio = <not set>
VRDE property: Client/DisableUSB = <not set>
VRDE property: Client/DisableClipboard = <not set>
VRDE property: Client/DisableUpstreamAudio = <not set>
VRDE property: Client/DisableRDPDR = <not set>
VRDE property: H3DRedirect/Enabled = <not set>
VRDE property: Security/Method = <not set>
VRDE property: Security/ServerCertificate = <not set>
VRDE property: Security/ServerPrivateKey = <not set>
VRDE property: Security/CACertificate = <not set>
VRDE property: Audio/RateCorrectionMode = <not set>
VRDE property: Audio/LogPath = <not set>
USB:             enabled
EHCI:            enabled
XHCI:            disabled
USB Device Filters:
<none>
Bandwidth groups:  <none>
Shared folders:  <none>
Video capturing:    not active
Capture screens:    0
Capture file:       /data/Virtualbox/VirtualBox_VMs/S-Men006-001/S-Men006-001.webm
Capture dimensions: 1024x768
Capture rate:       512 kbps
Capture FPS:        25
Description:
Oracle VM VirtualBox template for Oracle VM Manager 3.2.4 build 524
Guest:
Configured memory balloon size:      0 MB

Thank You.

Follow a "start the VM from cold-boot" / "observe error" / "shutdown the VM" cycle.
With the VM shut down completely (not paused or saved), right-click on the VM in the VirtualBox Manager and select "Show Log".
Save only the first "VBox.log", ZIP it and attach it to your response (see the "Upload attachment" tab below the reply form).

virtualbox.org

Ubuntu 16.04 Headless Server - Hangs VBox Guest starts

Ubuntu 16.04 Headless Server - Hangs VBox Guest starts

Re: Ubuntu 16.04 Headless Server - Hangs VBox Guest starts