USB WİRELESS ADAPTER HELP

[gokhan]

I use virtualbox on manjaro for kali virtualisation. I mustt add usb wireless adapter to usewifi on kali
but it doesn't appear on virtualbox. Please help me.

[Perryg]

Linux host USB is probably the easiest of all distros supported. There needs to be 3 things to achieve success.

• 1) Matching extension pack installed.
  2) ( host requirement ) user name added to the vboxusers group followed with a logout and login or a reboot of the host to enable the new permission.
  3) You need to be using the official version of VirtualBox and the official version of the extension pack.

Note: the repo version of the extension pack does not have USB support because VirtualBox USB is closed source and you must use and accept the license for the official version.

[gokhan]

Can you tell me how to do please?

for 1) Matching extension pack installed.
2) ( host requirement ) user name added to the vboxusers group followed with a logout and login or a reboot of the host to enable the new permission.

I have offical version of virtualbox

That's very important for me.

[Perryg]

First you need to post the guests log file ( as an attachment ). Right click on the guest in the Main Manager then click show log. Save and post as an attachment. Compress if it is too large to post.

[gokhan]

I installed extension pack and add virtualbox and add vboxusers
but not resolved. Maybe there is no wn722n driver. How to setup driver on manjaro?

[Perryg]

You still need to provide the information requested. If you do not want to that is of course your choice but without that not much can be done to diagnose the issue.

[gokhan]

VBoxManage list extpacks

Code: Select all

Extension Packs: 1
Pack no. 0:   Oracle VM VirtualBox Extension Pack
Version:      5.1.24
Revision:     117012
Edition:      
Description:  USB 2.0 and USB 3.0 Host Controller, Host Webcam, VirtualBox RDP, PXE ROM, Disk Encryption, NVMe.
VRDE Module:  VBoxVRDP
Usable:       true 
Why unusable: 

VBoxManage usbhost

Code: Select all

Host USB Devices:

<none>

VBoxManage usbfilters

Code: Select all

Global USB Device Filters:

<none>

id

Code: Select all

uid=1000(gokhan) gid=1000(gokhan) groups=1000(gokhan),3(sys),7(lp),10(wheel),56(bumblebee),90(network),91(video),93(optical),95(storage),96(scanner),98(power)

[Perryg]

In a host terminal run this:

Code: Select all

sudo usermod -aG vboxusers <your username>

Replace <your username> with the name you use to log in. Type your user password when prompted.


Be sure to log off and back in to finalize the change in permissions

[gokhan]

i did and added usb device Realtek 802.11 n NIC but i don't see wlan in kali.
i used 'iwconfig' in manjaro and result :

Code: Select all

wlp0s20u3  IEEE 802.11bgn  ESSID:"G2_8114"  Nickname:"<WIFI@REALTEK>"
          Mode:Managed  Frequency:2.437 GHz  Access Point: C4:9A:02:65:98:A8   
          Bit Rate:72.2 Mb/s   Sensitivity:0/0  
          Retry:off   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=87/100  Signal level=-44 dBm  Noise level=0 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

lo        no wireless extensions.

enp4s0f1  no wireless extensions.

wlp3s0    IEEE 802.11  ESSID:"G2_8114"  
          Mode:Managed  Frequency:2.437 GHz  Access Point: C4:9A:02:65:98:A8   
          Bit Rate=72.2 Mb/s   Tx-Power=16 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=70/70  Signal level=-35 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:39   Missed beacon:0

[Perryg]

post the results of "id" again

[gokhan]

id result :

Code: Select all

uid=1000(gokhan) gid=1000(gokhan) groups=1000(gokhan),3(sys),7(lp),10(wheel),56(bumblebee),90(network),91(video),93(optical),95(storage),96(scanner),98(power),108(vboxusers)

[Perryg]

Now post the results of the following from the guest terminal:

lsusb

[gokhan]

lsusb result :

Code: Select all

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 0bda:57b4 Realtek Semiconductor Corp. 
Bus 001 Device 005: ID 13d3:3408 IMC Networks 
Bus 001 Device 006: ID 2357:010c  
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[Perryg]

Bus 001 Device 003: ID 0bda:57b4 Realtek Semiconductor Corp.

OK so the guest sees the adapter. This now becomes an OS issue and for that you will need to contact the vendor. I suspect it might have something to do with the firmware or the adapter is not supported by the OS but that is something they will need to tell you.

[gokhan]

hi again
lsusb result :

Code: Select all

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 0bda:57b4 Realtek Semiconductor Corp. 
Bus 001 Device 004: ID 13d3:3408 IMC Networks 
Bus 001 Device 005: ID 2357:010c  
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

usb wireless adapter's name is unnamed. (Bus 001 Device 005: ID 2357:010c)
and when i want to connect to wifi in manjaro it looks like Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter
but when i want to add in virtualbox it looks like Realtek 802.11n NIC, also when i start the virtualbox it stops wifi adapter