Amazon EC2 Instance
Posted: 17. Feb 2017, 11:38
Hello,
Perhaps there are gurus who can help me.
I need to deploy on Amazon AWS specific OS, based on linux.
But there is a problem with the network connection.
I have run the instance on Debian Jessie and setup virtualbox, create a guest system by CLI, connect additional network interface on instance and associate with new ElasticIP. How do I assign to guests a new IP without NAT?
I can not import a virtual machine, as kernel is not compatible with AWS.
I.e. need to map IP on eth2 to the guest or directly mount the network card.
Thanks in advance for your help.
Perhaps there are gurus who can help me.
I need to deploy on Amazon AWS specific OS, based on linux.
But there is a problem with the network connection.
I have run the instance on Debian Jessie and setup virtualbox, create a guest system by CLI, connect additional network interface on instance and associate with new ElasticIP. How do I assign to guests a new IP without NAT?
I can not import a virtual machine, as kernel is not compatible with AWS.
Code: Select all
# cat /etc/debian_version
8.7Code: Select all
# virtualbox -h
Oracle VM VirtualBox Manager 4.3.36_DebianCode: Select all
# ifconfig
eth0 Link encap:Ethernet HWaddr 0a:95:3f:cb:3b:a1
inet addr:172.31.40.4 Bcast:172.31.47.255 Mask:255.255.240.0
UP BROADCAST RUNNING MULTICAST MTU:9001 Metric:1
RX packets:3952 errors:0 dropped:2 overruns:0 frame:0
TX packets:4480 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1127721 (1.0 MiB) TX bytes:3271866 (3.1 MiB)
eth1 Link encap:Ethernet HWaddr 0a:f0:e3:0b:8e:bf
inet addr:172.31.36.228 Bcast:172.31.47.255 Mask:255.255.240.0
UP BROADCAST RUNNING MULTICAST MTU:9001 Metric:1
RX packets:114 errors:0 dropped:0 overruns:0 frame:0
TX packets:146 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6860 (6.6 KiB) TX bytes:11452 (11.1 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)Code: Select all
# cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
auto eth1
iface eth1 inet dhcp
post-up ip rule add from 172.31.36.228 table default
post-up ip route add default via 172.31.32.1 dev eth1 table default
pre-down ip rule del from 172.31.36.228 table default
pre-down ip route del default via 172.31.32.1 dev eth1 table defaultCode: Select all
# vboxmanage showvminfo "test"
Name: test
Groups: /
Guest OS: Other Linux (32-bit)
UUID: afe8a72f-58cc-4ea3-852b-c483ead7a80b
Config file: /root/VirtualBox VMs/test/test.vbox
Snapshot folder: /root/VirtualBox VMs/test/Snapshots
Log folder: /root/VirtualBox VMs/test/Logs
Hardware UUID: afe8a72f-58cc-4ea3-852b-c483ead7a80b
Memory size: 512MB
Page Fusion: off
VRAM size: 16MB
CPU exec cap: 100%
HPET: off
Chipset: piix3
Firmware: BIOS
Number of CPUs: 1
PAE: on
Long Mode: off
Synthetic CPU: off
CPUID overrides: None
Boot menu mode: message and menu
Boot Device (1): DVD
Boot Device (2): HardDisk
Boot Device (3): Not Assigned
Boot Device (4): Not Assigned
ACPI: on
IOAPIC: off
Time offset: 0ms
RTC: local time
Hardw. virt.ext: on
Nested Paging: on
Large Pages: off
VT-x VPID: on
VT-x unr. exec.: on
State: running (since 2017-02-17T07:51:04.410000000)
Monitor count: 1
3D Acceleration: off
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: off
Allow Tracing to Access VM: off
Tracing Configuration:
Autostart Enabled: off
Autostart Delay: 0
Default Frontend:
Storage Controller Name (0): SATA Controller
Storage Controller Type (0): IntelAhci
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 30
Storage Controller Port Count (0): 30
Storage Controller Bootable (0): on
Storage Controller Name (1): IDE Controller
Storage Controller Type (1): PIIX4
Storage Controller Instance Number (1): 0
Storage Controller Max Port Count (1): 2
Storage Controller Port Count (1): 2
Storage Controller Bootable (1): on
SATA Controller (0, 0): /root/test.vdi (UUID: 8a6c0d19-0950-4119-82c4-8b8ae5d6c937)
NIC 1: MAC: 080027E8FC65, Attachment: Bridged Interface 'eth1', Cable connected: on, Trace: off (file: none), Type: Am79C973, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: PS/2 Mouse
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
LPT 1: disabled
LPT 2: disabled
Audio: disabled
Clipboard Mode: disabled
Drag'n'drop Mode: disabled
Video mode: 720x400x0 at 0,0
VRDE: enabled (Address 0.0.0.0, Ports 3333, MultiConn: off, ReuseSingleConn: off, Authentication type: external)
VRDE port: 3333
Video redirection: disabled
VRDE property: TCP/Ports = "3333"
VRDE property: TCP/Address = <not set>
VRDE property: VideoChannel/Enabled = <not set>
VRDE property: VideoChannel/Quality = <not set>
VRDE property: VideoChannel/DownscaleProtection = <not set>
VRDE property: Client/DisableDisplay = <not set>
VRDE property: Client/DisableInput = <not set>
VRDE property: Client/DisableAudio = <not set>
VRDE property: Client/DisableUSB = <not set>
VRDE property: Client/DisableClipboard = <not set>
VRDE property: Client/DisableUpstreamAudio = <not set>
VRDE property: Client/DisableRDPDR = <not set>
VRDE property: H3DRedirect/Enabled = <not set>
VRDE property: Security/Method = "rdp"
VRDE property: Security/ServerCertificate = <not set>
VRDE property: Security/ServerPrivateKey = <not set>
VRDE property: Security/CACertificate = <not set>
VRDE property: Audio/RateCorrectionMode = <not set>
VRDE property: Audio/LogPath = <not set>
USB: disabled
EHCI: disabled
USB Device Filters:
<none>
Available remote USB devices:
<none>
Currently Attached USB Devices:
<none>
Bandwidth groups: <none>
Shared folders: <none>
VRDE Connection: active
Clients so far: 2
Start time: 2017/02/17 07:51:10 UTC
Sent: 2385851 Bytes
Average speed: 446 B/s
Sent total: 2385851 Bytes
Received: 41821 Bytes
Speed: 7 B/s
Received total: 41821 Bytes
User name: root
Domain: WORKGROUP
Client name: WS
Client IP: 192.168.150.151
Client version: 7601
Encryption: RDP4
Video capturing: not active
Capture screens: 0
Capture file: /root/VirtualBox VMs/test/test.webm
Capture dimensions: 1024x768
Capture rate: 512 kbps
Capture FPS: 25
Guest:
Configured memory balloon size: 0 MB
OS type: Linux
Additions run level: 0
Guest Facilities:
No active facilities.Thanks in advance for your help.