Page 1 of 1

When updated to 5.1.4 r110228, The VMs can't open.

Posted: 31. Aug 2016, 05:25
by Sizel
RTR3InitEx failed with rc=-1912 (rc=-1912)

The VirtualBox kernel modules do not match this version of VirtualBox. The installation of VirtualBox was apparently not successful. Executing

'/sbin/vboxconfig'

may correct this. Make sure that you do not mix the OSE version and the PUEL version of VirtualBox.

where: supR3HardenedMainInitRuntime what: 4 VERR_VM_DRIVER_VERSION_MISMATCH (-1912) - The installed support driver doesn't match the version of the user.


===========================================================
I have execed '/sbin/vboxconfig' , the output is listed

Adding system startup for /etc/init.d/vboxdrv ...
/etc/rc0.d/K80vboxdrv -> ../init.d/vboxdrv
/etc/rc1.d/K80vboxdrv -> ../init.d/vboxdrv
/etc/rc6.d/K80vboxdrv -> ../init.d/vboxdrv
/etc/rc2.d/S20vboxdrv -> ../init.d/vboxdrv
/etc/rc3.d/S20vboxdrv -> ../init.d/vboxdrv
/etc/rc4.d/S20vboxdrv -> ../init.d/vboxdrv
/etc/rc5.d/S20vboxdrv -> ../init.d/vboxdrv
Adding system startup for /etc/init.d/vboxballoonctrl-service ...
/etc/rc0.d/K65vboxballoonctrl-service -> ../init.d/vboxballoonctrl-service
/etc/rc1.d/K65vboxballoonctrl-service -> ../init.d/vboxballoonctrl-service
/etc/rc6.d/K65vboxballoonctrl-service -> ../init.d/vboxballoonctrl-service
/etc/rc2.d/S35vboxballoonctrl-service -> ../init.d/vboxballoonctrl-service
/etc/rc3.d/S35vboxballoonctrl-service -> ../init.d/vboxballoonctrl-service
/etc/rc4.d/S35vboxballoonctrl-service -> ../init.d/vboxballoonctrl-service
/etc/rc5.d/S35vboxballoonctrl-service -> ../init.d/vboxballoonctrl-service
Adding system startup for /etc/init.d/vboxautostart-service ...
/etc/rc0.d/K65vboxautostart-service -> ../init.d/vboxautostart-service
/etc/rc1.d/K65vboxautostart-service -> ../init.d/vboxautostart-service
/etc/rc6.d/K65vboxautostart-service -> ../init.d/vboxautostart-service
/etc/rc2.d/S35vboxautostart-service -> ../init.d/vboxautostart-service
/etc/rc3.d/S35vboxautostart-service -> ../init.d/vboxautostart-service
/etc/rc4.d/S35vboxautostart-service -> ../init.d/vboxautostart-service
/etc/rc5.d/S35vboxautostart-service -> ../init.d/vboxautostart-service
Adding system startup for /etc/init.d/vboxweb-service ...
/etc/rc0.d/K65vboxweb-service -> ../init.d/vboxweb-service
/etc/rc1.d/K65vboxweb-service -> ../init.d/vboxweb-service
/etc/rc6.d/K65vboxweb-service -> ../init.d/vboxweb-service
/etc/rc2.d/S35vboxweb-service -> ../init.d/vboxweb-service
/etc/rc3.d/S35vboxweb-service -> ../init.d/vboxweb-service
/etc/rc4.d/S35vboxweb-service -> ../init.d/vboxweb-service
/etc/rc5.d/S35vboxweb-service -> ../init.d/vboxweb-service
vboxdrv.sh: Building VirtualBox kernel modules.
vboxdrv.sh: Starting VirtualBox services.
vboxdrv.sh: Starting VirtualBox services.
sizel@sizel-dell:~$ lsmod | grep box
vboxpci 23116 0
vboxnetadp 25813 0
vboxnetflt 27880 0
vboxdrv 446786 3 vboxnetadp,vboxnetflt,vboxpci


But the error is also encouted.

Re: When updated to 5.1.4 r110228, The VMs can't open.

Posted: 31. Aug 2016, 13:39
by Perryg
Minimal information needed to be able to help

You might try purging the install you have, reboot the host to make sure all modules are removed and then install again.