unable to handle kernel paging request
Posted: 14. Jul 2008, 21:41
Host: Debian sid
Guest: w$ xp
MB Asus A7N8X-X
CPU XP2600+
1.5 GB RAM
GC GeForce 3 TI-200 (w/ accel driver)
=====================================================
Hi, since 1.6.0 (non-open-source), I always have a crash at startup.
Here is lscpi:
=====================================================
and here is dmesg:
=====================================================
I can have it to work using the OSE (1.6.51) version, but I *need* to have
USB useable.
So I seek for fixing to that weird thing.[/code]
Guest: w$ xp
MB Asus A7N8X-X
CPU XP2600+
1.5 GB RAM
GC GeForce 3 TI-200 (w/ accel driver)
=====================================================
Hi, since 1.6.0 (non-open-source), I always have a crash at startup.
Here is lscpi:
Code: Select all
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:0a.0 Multimedia audio controller: Quicknet Technologies Inc PhoneJack-PCI
00:0b.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 04)
00:0f.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
00:0f.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
00:0f.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: nVidia Corporation NV20 [GeForce3 Ti 200] (rev a3)
and here is dmesg:
Code: Select all
BUG: unable to handle kernel paging request at 00100100
IP: [<f8973ebf>] :snd:snd_ctl_dev_disconnect+0x4b/0x76
*pde = 00000000
Oops: 0000 [#1] PREEMPT
Modules linked in: cdc_acm binfmt_misc fan cx88_blackbird cx2341x wm8775 cx8800 dvb_pll cx22702 cx88_dvb cx88_vp3054_i2c tuner tea5767 tda8290 tuner_xc2028 firmware_class tda9887 tuner_simple mt20xx tea5761 cx8802 cx88xx ir_common btcx_risc videobuf_dvb dvb_core videobuf_dma_sg videobuf_core ixj phonedev cifs sd_mod nls_iso8859_1 nls_cp850 fuse serpent vboxdrv bridge llc tun nvidia(P) it87 hwmon_vid hwmon video1394 raw1394 sbp2 snd_usb_audio snd_usb_lib usb_storage snd_hwdep pwc i2c_viapro snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss 8250_pnp 8250 serial_core snd_pcm snd_mpu401_uart snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd snd_page_alloc via_ircc via_rhine mii bitrev crc32 soundcore irda i2c_algo_bit crc_ccitt tveeprom ehci_hcd videodev v4l1_compat compat_ioctl32 v4l2_common i2c_core uhci_hcd ohci1394 ieee1394 thermal button via_agp processor agpgart evdev [last unloaded: cx88_vp3054_i2c]
Pid: 6602, comm: VirtualBox Tainted: P (2.6.25.10 #1)
EIP: 0060:[<f8973ebf>] EFLAGS: 00210246 CPU: 0
EIP is at snd_ctl_dev_disconnect+0x4b/0x76 [snd]
EAX: 00000000 EBX: 00100100 ECX: 00020004 EDX: 0000001d
ESI: f7fffe00 EDI: f7ffff4c EBP: f7ffff68 ESP: f3237d80
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process VirtualBox (pid: 6602, ti=f3236000 task=f33c0df0 task.ti=f3236000)
Stack: f6f12a80 00000000 f7fffe00 f7ffff40 f8975a6b f6f12a80 f8975aba 00000000
f7fffe00 f7dca21c f6f13efc f8972cf4 f7dca200 f6f13ee0 f9ca18c7 f7fffe00
f7dca200 f9cb0230 f7dca21c f6e80000 c02584e2 00000000 f7dca284 f7dca21c
Call Trace:
[<f8975a6b>] snd_device_disconnect+0x27/0x56 [snd]
[<f8975aba>] snd_device_disconnect_all+0x20/0x3d [snd]
[<f8972cf4>] snd_card_disconnect+0x142/0x160 [snd]
[<f9ca18c7>] usb_audio_disconnect+0x47/0x103 [snd_usb_audio]
[<c02584e2>] usb_unbind_interface+0x44/0x94
[<c02333e8>] __device_release_driver+0x6d/0x8d
[<c0233503>] device_release_driver+0x24/0x3a
[<c025856b>] usb_driver_release_interface+0x39/0x80
[<c025cd5e>] usbdev_ioctl+0x1282/0x13a2
[<c01634d2>] dput+0x15/0x113
[<c015cea0>] __link_path_walk+0xba2/0xc9c
[<c012c0ee>] futex_wait+0x261/0x31a
[<c015d025>] path_walk+0x8b/0x93
[<c015af7f>] generic_permission+0x4c/0xc1
[<c01f020a>] kobject_get+0xf/0x13
[<c02317d4>] get_device+0x10/0x14
[<c0250dbb>] usb_get_dev+0xf/0x13
[<c025adc2>] usbdev_open+0x138/0x148
[<c015e024>] open_namei+0x242/0x59a
[<c025ac8a>] usbdev_open+0x0/0x148
[<c0153d87>] __dentry_open+0xfe/0x18a
[<c0153e90>] nameidata_to_filp+0x1c/0x2c
[<c0153ecb>] do_filp_open+0x2b/0x31
[<c015ee09>] vfs_ioctl+0x49/0x5f
[<c015f04e>] do_vfs_ioctl+0x22f/0x241
[<c0153f7f>] do_sys_open+0xae/0xb6
[<c015f08c>] sys_ioctl+0x2c/0x44
[<c0103b2a>] sysenter_past_esp+0x5f/0x85
=======================
Code: eb 29 8d 43 18 6a 00 b9 01 00 00 00 ba 03 00 00 00 e8 91 fb 79 c7 8d 43 20 b9 04 00 02 00 ba 1d 00 00 00 e8 2c a8 7e c7 58 8b 1b <8b> 03 0f 18 00 90 39 eb 75 cd 89 f8 e8 10 3c 7b c7 89 f2 83 c9
EIP: [<f8973ebf>] snd_ctl_dev_disconnect+0x4b/0x76 [snd] SS:ESP 0068:f3237d80
---[ end trace 0807b2f67f852743 ]---
I can have it to work using the OSE (1.6.51) version, but I *need* to have
USB useable.
So I seek for fixing to that weird thing.[/code]