(H)Lubuntu x64 (G)Win7 x86 and USB-Printer

[Martin]

The Utax TA LP 3022/4022 shown in your USB filter is a Triumph Adler laser printer, which is something different to the Kyocera FS-1030D in the screenshot from the guest.
Also the screenshot shows the printer connected to LPT1: and not to USB.

[halundort]

Hello Martin,
thanks. My printer is a Triumph Adler. Yes in the lists the programms found it like UTAX or Kyocera. But i never got problems before. How i can get it into usb ? I only have LPT1 or COM ports. How i can change that?

thx

[Perryg]

Can you actually get a USB device to work in the guest? Something like a thumb drive, Etc.?

Lets see what the following shows. In the host terminal run the following and post the results:

Code: Select all

lsusb

and 

VBoxManage list usbhost

[halundort]

Hello,

lsusb
Bus 002 Device 008: ID 04a9:190a Canon, Inc. CanoScan LiDE 210
Bus 002 Device 007: ID 0482:0015 Kyocera Corp.
Bus 002 Device 006: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 005: ID 13ba:0018 PCPlay Barcode PCP-BCG4209
Bus 002 Device 003: ID 058f:9254 Alcor Micro Corp. Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Host USB Devices:

UUID: 7c10f15b-8190-49d5-9a63-cff21730d1b8
VendorId: 0x00da (00DA)
ProductId: 0x0029 (0029)
Revision: 57.96 (5796)
Port: 5
USB version/speed: 2/High
Manufacturer: Generic
Product: USB2.0-CRW
SerialNumber: 20100201396000000
Address: sysfs:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6//device:/dev/vboxusb/002/004
Current State: Busy

UUID: 1cf6031a-59ad-41e6-bf9a-f16dbd21a5ef
VendorId: 0x00ba (00BA)
ProductId: 0x0018 (0018)
Revision: 0.1 (0001)
Port: 0
USB version/speed: 1/Low
Product: Barcode Reader
Address: sysfs:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1//device:/dev/vboxusb/002/005
Current State: Busy

UUID: 04528332-4d31-4024-b7a3-c2dafdc927e4
VendorId: 0x00a9 (00A9)
ProductId: 0x000a (000A)
Revision: 7.1 (0701)
Port: 3
USB version/speed: 2/Full
Manufacturer: Canon
Product: CanoScan
Address: sysfs:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4//device:/dev/vboxusb/002/008
Current State: Available

UUID: d8c61d2c-d779-46a1-9b03-beac1455348e
VendorId: 0x0082 (0082)
ProductId: 0x0015 (0015)
Revision: 0.0 (0000)
Port: 2
USB version/speed: 1/Full
Manufacturer: UTAX_TA
Product: UTAX_TA LP 3022_LP 4022
SerialNumber: XWH6704317
Address: sysfs:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.3//device:/dev/vboxusb/002/007
Current State: Busy

UUID: 5dc7f1a4-9b05-4045-9a66-87cb2802fc96
VendorId: 0x003a (003A)
ProductId: 0x0010 (0010)
Revision: 1.0 (0100)
Port: 1
USB version/speed: 1/Low
Manufacturer: PixArt
Product: USB Optical Mouse
Address: sysfs:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.2//device:/dev/vboxusb/002/006
Current State: Busy

When i connect my Scanner, i get the same message like with the printer.But after i install the driver of it everything is fine. Some ideas ?
thy

[Perryg]

When i connect my Scanner, i get the same message like with the printer.But after i install the driver of it everything is fine. Some ideas ?

So you can get the scanner to work in the guest right and it is a USB scanner?

[halundort]

Hello perrgy,
yes i can. But first i get the same message like with the printer.
After i am install the driver,then is everything fine. i'm not shure about the id of the printer. Its a Kycera labeld as Triumph.can that be that here it comes to problems ?
Because i saw in linux 0482:0015 and in VM manager ther write 0082:0015. Can that be a reason ?

[Perryg]

OK so you have eliminated the host and VirtualBox from being the direct cause. The only thing left is the guest and the printer drivers. This falls into the realm of a Windows driver and or printer support install issue. I can not help with that as I don't really do Windows these days, but I do remember how hard it was if you do not follow the printer manufacture install instructions to the letter. That would be your next step as far as I see it.

I will now leave you in the hands of the Windows folks as I don't have anything else to give in this matter.

[halundort]

Hello perryg,
thanks for your great support. I like that if somebody analize everything step by step and the circle becomes smaller. But what i don't understand is, on other machines the printer works with the same driver.hm

[halundort]

Hello Perryg,
i found this in the log-file

VUSB: Attached '00007f3918ad2680[proxy 0482:0015]' to port 2
00:00:00.926990 ERROR [COM]: aRC=VBOX_E_IPRT_ERROR (0x80bb0005) aIID={02326f63-bcb3-4481-96e0-30d1c2ee97f6} aComponent={DisplayWrap} aText={Could not take a screenshot (VERR_NOT_SUPPORTED)}, preserve=false aResultDetail=0

What mean that ?

[Perryg]

Sorry since this is not in my immediate section now I missed it earlier. The error you post is normal. The screen shot is for the preview window in the main manager and depending on where the boot process is will show this error.