Page 1 of 1
Wyse T10 connected to a VM 2012R2
Posted: 14. Jul 2016, 10:47
by JannisF
Hello,
I'm setting up a lab environment at work, but have run into something strange.
I managed to connect the thin client to my VM but the session keps disconnecting.
What could cause this issue?
Is it Virtualbox or Wyse related?
Re: Wyse T10 connected to a VM 2012R2
Posted: 14. Jul 2016, 12:04
by socratis
You are really thin on the details. You really have to give us more than a simple "I managed to connect the thin client to my VM but the session keps disconnecting". A lot more details about software, hardware, connections, everything. A whole lot more.
Re: Wyse T10 connected to a VM 2012R2
Posted: 14. Jul 2016, 13:25
by JannisF
socratis wrote:You are really thin on the details. You really have to give us more than a simple "I managed to connect the thin client to my VM but the session keps disconnecting". A lot more details about software, hardware, connections, everything. A whole lot more.
1 Wyse T10 Thin Client
1 VirtualBox VM Server 2012R2
Attached to a bridged adapter (Intel(R) 82577LM Gigabit Network Connection)
Remote Display -> Enable Server
Serverport:5030
Authentication Method: Null
Authentication Timeout: 5000
Thin Client config
Code: Select all
; Specifics for the lab environment
ScreenSaver=180 \
Type=1
PRIVILEGE=High
connect=RDP \
Description="VM2012R2" \
host=172.16.50.210:5030 \
Username= \
Password= \
Icon=default \
autoconnect=yes \
reconnect=10 \
Printer=LPT1 \
Name="ZDesigner GK420d" \
PrinterID="ZDesigner GK420d" \
Enabled=yes \
EnableLPD=yes
Re: Wyse T10 connected to a VM 2012R2
Posted: 14. Jul 2016, 14:18
by socratis
OK, let me see if I can put this into a more proper report. You still have to fill in the red sections. BTW, the blue is the only information you gave in your initial report.
I have a Wyste T10 Thin Client running
(?????). I am trying to connect via RDP
(make? version?) to a
(computer? OS? Version), running VirtualBox version
(???), with a 2012r2 Windows Server as a guest. The guest is using Bridged mode to connect to the network (Intel(R) 82577LM Gigabit Network Connection).
I managed to connect the thin client to my VM but the session keeps disconnecting. Below are the details of the RDP connection settings for the VM:
Remote Display -> Enable Server
Serverport:5030
Authentication Method: Null
Authentication Timeout: 5000
And here are the details of the Thin Client config:
Code: Select all
; Specifics for the lab environment
ScreenSaver=180 \
Type=1
PRIVILEGE=High
connect=RDP \
Description="VM2012R2" \
host=172.16.50.210:5030 \
Username= \
Password= \
Icon=default \
autoconnect=yes \
reconnect=10 \
Printer=LPT1 \
Name="ZDesigner GK420d" \
PrinterID="ZDesigner GK420d" \
Enabled=yes \
EnableLPD=yes
Please correct the missing parts and anything else that needs correction. Post the whole thing in your reply.