Wyse T10 connected to a VM 2012R2

[JannisF]

Hello,
I'm setting up a lab environment at work, but have run into something strange.
I managed to connect the thin client to my VM but the session keps disconnecting.
What could cause this issue?
Is it Virtualbox or Wyse related?

[socratis]

You are really thin on the details. You really have to give us more than a simple "I managed to connect the thin client to my VM but the session keps disconnecting". A lot more details about software, hardware, connections, everything. A whole lot more.

[JannisF]

You are really thin on the details. You really have to give us more than a simple "I managed to connect the thin client to my VM but the session keps disconnecting". A lot more details about software, hardware, connections, everything. A whole lot more.

1 Wyse T10 Thin Client
1 VirtualBox VM Server 2012R2

Attached to a bridged adapter (Intel(R) 82577LM Gigabit Network Connection)

Remote Display -> Enable Server
Serverport:5030
Authentication Method: Null
Authentication Timeout: 5000


Thin Client config

Code: Select all

; Specifics for the lab environment

ScreenSaver=180 \
 Type=1

PRIVILEGE=High

connect=RDP \
 Description="VM2012R2" \
 host=172.16.50.210:5030 \
 Username= \
 Password= \
 Icon=default \
 autoconnect=yes \
 reconnect=10 \

Printer=LPT1 \
 Name="ZDesigner GK420d" \
 PrinterID="ZDesigner GK420d" \
 Enabled=yes \
 EnableLPD=yes

[socratis]

OK, let me see if I can put this into a more proper report. You still have to fill in the red sections. BTW, the blue is the only information you gave in your initial report.

---

I have a Wyste T10 Thin Client running (?????). I am trying to connect via RDP (make? version?) to a (computer? OS? Version), running VirtualBox version (???), with a 2012r2 Windows Server as a guest. The guest is using Bridged mode to connect to the network (Intel(R) 82577LM Gigabit Network Connection). I managed to connect the thin client to my VM but the session keeps disconnecting. Below are the details of the RDP connection settings for the VM:
Remote Display -> Enable Server
Serverport:5030
Authentication Method: Null
Authentication Timeout: 5000

And here are the details of the Thin Client config:

Code: Select all

; Specifics for the lab environment

ScreenSaver=180 \
 Type=1

PRIVILEGE=High

connect=RDP \
 Description="VM2012R2" \
 host=172.16.50.210:5030 \
 Username= \
 Password= \
 Icon=default \
 autoconnect=yes \
 reconnect=10 \

Printer=LPT1 \
 Name="ZDesigner GK420d" \
 PrinterID="ZDesigner GK420d" \
 Enabled=yes \
 EnableLPD=yes

---

Please correct the missing parts and anything else that needs correction. Post the whole thing in your reply.