Network adapters "Not selected" after upgrade to Windows 10

[Larry Menard]

I've been using VirtualBox very happily on my Windows 8.1 64-bit host for over a year (currently 4.3.3). Last night I upgraded to Windows 10, and none of my VMs start now.

Could not start the machine CentOS 6.5 64-bit because the following physical network interfaces were not found:

Intel(R) Dual Band Wireless-AC 7260 (adapter 1)

You can either change the machine's network settings or stop the machine.

If I select "Change settings" it displays the VM's network settings, and a message "Invalid settings detected" at the bottom of the dialog box.

The "Enable Network Adapter" checkbox is checked and the "Attached to:" drop-down is "Bridged Adapter" (which is correct), but the "Name:" drop-down just says "Not selected". There are no other options available for that drop-down.

After I close the VM I get another dialog saying:

Failed to open a session for the virtual machine CentOS 6.5 64-bit.

Nonexistent host networking interface, name 'Intel(R) Dual Band Wireless-AC 7260' (VERR_INTERNAL_ERROR).

Result Code: E_FAIL (0x80004005)
Component: Console
Interface: IConsole {8ab7c520-2442-4b66-8d74-4ff1e195d2b6}

I see on the Download page that VBox 5 is not supported on Windows 10, but I see no similar warning for VBox 4.3.3, so I presume this should work.

Can anyone help? (Obviously, this is urgent.)

Thanks.

Forgot to mention... I have tried re-running the Installer, first the "Repair" option, then the "Uninstall" option and re-install. Didn't help.

[marcello.g]

Hi,
I had same problem. I simply solved by installing virtualbox 5.

[Giusi]

which host you have..?

[marcello.g]

which host you have..?

Windows 10 Home 64bit

[Giusi]

could you post a vboxsvc.log ?

[marcello.g]

could you post a vboxsvc.log ?

Sorry. I tried to send, getting this warning:
You must be a member for 1 days and have 1 posts before you can post urls.
...even if I cleaned up my text from URLs and IPs!
...???

[marcello.g]

could you post a vboxsvc.log ?

[[[ some characters replaced ]]]
VirtualBox COM Server 5,0,3 r102322 win,amd64 (Aug 25 2015 00:49:54) release log
00:00:00,000000 main Log opened 2015-08-26T12:35:06,249673500Z
00:00:00,000000 main Build Type: release
00:00:00,000000 main OS Product: Windows 8
00:00:00,000000 main OS Release: 6,2,9200
00:00:00,000000 main OS Service Pack:
00:00:00,062536 main DMI Product Name: 20378
00:00:00,078125 main DMI Product Version: Lenovo Y50-70
00:00:00,078125 main Host RAM: 8104MB total, 5530MB available
00:00:00,078125 main Executable: C:'Program Files'Oracle'VirtualBox'VBoxSVC,exe
00:00:00,078125 main Process ID: 8128
00:00:00,078125 main Package type: WINDOWS_64BITS_GENERIC
00:00:00,078125 Home directory: 'C:'Users'root/,VirtualBox'
00:00:00,078125 Loading settings file "C:'Users'root/,VirtualBox'VirtualBox,xml" with version "1,14-windows"
00:00:00,078125 Getting USB descriptor failed with error 31
00:00:00,078125 Getting USB descriptor failed with error 31
00:00:00,211514 USB: Unknown USB device detected ( idVendor: 0x0000, idProduct: 0x0000 ), Please, report the idVendor and idProduct to vbox,org,
00:00:00,211514 USB: Unknown USB device detected ( idVendor: 0x0000, idProduct: 0x0000 ), Please, report the idVendor and idProduct to vbox,org,
00:00:00,211514 NetIfList: building the list of interfaces
00:00:00,242937 NetIfList: fetched INetCfgBindingPath interface
00:00:00,242937 NetIfList: fetched INetCfgBindingInterface interface
00:00:00,242937 NetIfList: got Microsoft Wi-Fi Direct Virtual Adapter
00:00:00,242937 NetIfList: failed to get device status (0x8004a027)
00:00:00,242937 NetIfList: fetched INetCfgBindingPath interface
00:00:00,242937 NetIfList: fetched INetCfgBindingInterface interface
00:00:00,242937 NetIfList: got Intel(R) Dual Band Wireless-AC 3160
00:00:00,242937 NetIfList: fetched network adapter id: pci'ven_8086&dev_08b4&subsys_82708086
00:00:00,274146 vboxNetWinAddComponent: adding Intel(R) Dual Band Wireless-AC 3160
00:00:00,274146 NetIfList: fetched INetCfgBindingPath interface
00:00:00,274146 NetIfList: fetched INetCfgBindingInterface interface
00:00:00,274146 NetIfList: got Realtek PCIe GBE Family Controller
00:00:00,274146 NetIfList: fetched network adapter id: pci'ven_10ec&dev_8168&subsys_380d17aa&rev_10
00:00:00,293986 vboxNetWinAddComponent: adding Realtek PCIe GBE Family Controller
00:00:00,294486 NetIfList: fetched INetCfgBindingPath interface
00:00:00,294486 NetIfList: fetched INetCfgBindingInterface interface
00:00:00,294486 NetIfList: got Microsoft Kernel Debug Network Adapter
00:00:00,294486 NetIfList: fetched network adapter id: root'kdnic
00:00:00,311982 vboxNetWinAddComponent: adding Microsoft Kernel Debug Network Adapter
00:00:00,311982 NetIfList: fetched INetCfgBindingPath interface
00:00:00,311982 NetIfList: fetched INetCfgBindingInterface interface
00:00:00,311982 NetIfList: got Microsoft Wi-Fi Direct Virtual Adapter #2
00:00:00,312482 NetIfList: fetched network adapter id: {5d624f94-8850-40c3-a3fa-a4fd2080baf3}'vwifimp_wfd
00:00:00,329210 vboxNetWinAddComponent: adding Microsoft Wi-Fi Direct Virtual Adapter #2
00:00:00,329210 NetIfList: fetched INetCfgBindingPath interface
00:00:00,329210 NetIfList: fetched INetCfgBindingInterface interface
00:00:00,329210 NetIfList: got Microsoft Hosted Network Virtual Adapter
00:00:00,329210 NetIfList: fetched network adapter id: {5d624f94-8850-40c3-a3fa-a4fd2080baf3}'vwifimp_sap
00:00:00,347143 vboxNetWinAddComponent: adding Microsoft Hosted Network Virtual Adapter
00:00:00,347143 NetIfList: fetched INetCfgBindingPath interface
00:00:00,347143 NetIfList: fetched INetCfgBindingInterface interface
00:00:00,347625 NetIfList: got VirtualBox Host-Only Ethernet Adapter
00:00:00,347903 NetIfList: fetched network adapter id: sun_vboxnetadp
00:00:00,356427 netIfListHostAdapters: Microsoft ISATAP Adapter #4
00:00:00,356427 netIfListHostAdapters: id = *isatap
00:00:00,356427 netIfListHostAdapters: Intel(R) Dual Band Wireless-AC 3160
00:00:00,356427 netIfListHostAdapters: id = pci'ven_8086&dev_08b4&subsys_82708086
00:00:00,356427 netIfListHostAdapters: Microsoft ISATAP Adapter
00:00:00,356427 netIfListHostAdapters: failed to get device status (0x8004a027)
00:00:00,356927 netIfListHostAdapters: Microsoft ISATAP Adapter #3
00:00:00,356927 netIfListHostAdapters: id = *isatap
00:00:00,356927 netIfListHostAdapters: Bluetooth Device (Personal Area Network)
00:00:00,356927 netIfListHostAdapters: failed to get device status (0x8004a027)
00:00:00,356927 netIfListHostAdapters: Microsoft Teredo Tunneling Adapter
00:00:00,356927 netIfListHostAdapters: id = *teredo
00:00:00,356927 netIfListHostAdapters: Microsoft Kernel Debug Network Adapter
00:00:00,357428 netIfListHostAdapters: id = root'kdnic
00:00:00,357428 netIfListHostAdapters: VirtualBox Host-Only Ethernet Adapter
00:00:00,357428 netIfListHostAdapters: id = sun_vboxnetadp
00:00:00,375038 vboxNetWinAddComponent: adding VirtualBox Host-Only Ethernet Adapter
00:00:00,375551 netIfListHostAdapters: Microsoft Wi-Fi Direct Virtual Adapter #2
00:00:00,375551 netIfListHostAdapters: id = {5d624f94-8850-40c3-a3fa-a4fd2080baf3}'vwifimp_wfd
00:00:00,375551 netIfListHostAdapters: Microsoft Hosted Network Virtual Adapter
00:00:00,375551 netIfListHostAdapters: id = {5d624f94-8850-40c3-a3fa-a4fd2080baf3}'vwifimp_sap
00:00:00,376054 netIfListHostAdapters: Realtek PCIe GBE Family Controller
00:00:00,376054 netIfListHostAdapters: id = pci'ven_10ec&dev_8168&subsys_380d17aa&rev_10
00:00:00,376054 netIfListHostAdapters: Microsoft Wi-Fi Direct Virtual Adapter
00:00:00,376054 netIfListHostAdapters: failed to get device status (0x8004a027)
00:00:00,376054 netIfListHostAdapters: Microsoft ISATAP Adapter #2
00:00:00,376054 netIfListHostAdapters: failed to get device status (0x8004a027)
00:00:00,376054 netIfListHostAdapters: Bluetooth Device (RFCOMM Protocol TDI)
00:00:00,376054 netIfListHostAdapters: failed to get device status (0x8004a027)
00:00:00,377072 HostDnsMonitor: old information
00:00:00,377072 no server entries
00:00:00,377072 no search string entries
00:00:00,377072 no domain set
00:00:00,377072 HostDnsMonitor: new information
00:00:00,377072 server 1: 8,8,8,8
00:00:00,377072 server 2: 8,8,4,4
00:00:00,377072 no search string entries
00:00:00,377072 no domain set
00:00:00,377072 HostDnsMonitorProxy::notify
00:00:00,486491 VD: VDInit finished
00:00:00,486491 Loading settings file "C:'DATI'VirtualBoxMachines'XP_8'XP_8,vbox" with version "1,14-windows"
00:00:00,509263 Loading settings file "C:'DATI'VirtualBoxMachines'Server W2008 web'Server W2008 web,vbox" with version "1,14-windows"
00:00:01,147944 ERROR [COM]: aRC=E_FAIL (0x80004005) aIID={4afe423b-43e0-e9d0-82e8-ceb307940dda} aComponent={MediumWrap} aText={Unknown exception
00:00:01,147944 F:'tinderbox'win-5,0'out'win,amd64'release'obj'VBoxAPIWrap'MediumWrap,cpp[2245] (long __cdecl MediumWrap::GetEncryptionSettings(unsigned short **,unsigned short **))}, preserve=false aResultDetail=0
00:00:01,147944 ERROR [COM]: aRC=E_FAIL (0x80004005) aIID={4afe423b-43e0-e9d0-82e8-ceb307940dda} aComponent={MediumWrap} aText={Unknown exception
00:00:01,147944 F:'tinderbox'win-5,0'out'win,amd64'release'obj'VBoxAPIWrap'MediumWrap,cpp[2245] (long __cdecl MediumWrap::GetEncryptionSettings(unsigned short **,unsigned short **))}, preserve=false aResultDetail=0
00:00:11,275211 main ERROR [COM]: aRC=VBOX_E_OBJECT_IN_USE (0x80bb000c) aIID={4afe423b-43e0-e9d0-82e8-ceb307940dda} aComponent={MediumWrap} aText={Medium 'C:'DATI'VirtualBoxMachines'XP_8'XP_8-disk1,vmdk' cannot be closed because it is still attached to 1 virtual machines}, preserve=false aResultDetail=0
00:00:11,275211 main ERROR [COM]: aRC=VBOX_E_OBJECT_IN_USE (0x80bb000c) aIID={4afe423b-43e0-e9d0-82e8-ceb307940dda} aComponent={MediumWrap} aText={Medium 'C:'DATI'VirtualBoxMachines'Server W2008 web'Server W2008,vdi' cannot be closed because it is still attached to 1 virtual machines}, preserve=false aResultDetail=0
00:00:11,275211 Watcher ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={0169423f-46b4-cde9-91af-1e9d5b6cd945} aComponent={VirtualBoxWrap} aText={The object is not ready}, preserve=false aResultDetail=0

[Larry Menard]

Guys, I am also getting the "You must be a member for 1 days and have 1 posts before you can post urls." message when I try to embed my log, so I'm going to embed only the last few messages:

00:00:00.156249 VDInit finished
00:00:00.171874 Loading settings file "C:\Users\Larry\VirtualBox VMs\Windows\Windows 7 Ultimate 64 bit\Windows 7 Ultimate 64 bit.vbox" with version "1.14-windows"
00:00:00.187499 Loading settings file "C:\Users\Larry\VirtualBox VMs\CentOS Linux\CentOS 6.5 64-bit\CentOS 6.5 64-bit.vbox" with version "1.14-windows"
00:00:00.203135 Loading settings file "C:\Users\Larry\VirtualBox VMs\CentOS Linux\CentOS 5.11 32-bit\CentOS 5.11 32-bit.vbox" with version "1.14-windows"
00:00:00.218750 Loading settings file "C:\Users\Larry\VirtualBox VMs\Windows\Windows XP 32-bit\Windows XP 32-bit.vbox" with version "1.14-windows"
00:00:00.218750 Loading settings file "C:\Users\Larry\VirtualBox VMs\CentOS 6.5 64-bit _2\CentOS 6.5 64-bit #2.vbox" with version "1.14-windows"
00:00:00.234375 Loading settings file "C:\Users\Larry\VirtualBox VMs\Windows 7 Ultimate 64 bit _2\Windows 7 Ultimate 64 bit #2.vbox" with version "1.14-windows"
00:00:00.234375 Loading settings file "C:\Users\Larry\VirtualBox VMs\Windows\Windows 7 Ultimate 32-bit\Windows 7 Ultimate 32-bit.vbox" with version "1.14-windows"
00:00:00.265643 Loading settings file "C:\Users\Larry\VirtualBox VMs\Masters for Cloning\Win7Ult64\Win7Ult64.vbox" with version "1.14-windows"
00:00:00.265643 Loading settings file "C:\Users\Larry\VirtualBox VMs\Masters for Cloning\CentOS64-Master\CentOS64-Master.vbox" with version "1.14-windows"
00:00:00.265643 Loading settings file "C:\Users\Larry\VirtualBox VMs\CentOS64-proxy\CentOS64-3.vbox" with version "1.14-windows"
00:00:00.281268 Loading settings file "C:\Users\Larry\VirtualBox VMs\Misc\Windows 8.1 Enterprise 64-bit\Windows 8.1 Enterprise 64-bit.vbox" with version "1.14-windows"
00:00:41.696012 Load [C:\Program Files\Oracle\VirtualBox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/win.amd64/VBoxHostWebcam.DLL] rc VINF_SUCCESS
00:00:41.710437 ERROR [COM]: aRC=VBOX_E_IPRT_ERROR (0x80bb0005) aIID={480cf695-2d8d-4256-9c7c-cce4184fa048} aComponent={SessionMachine} aText={Saved screenshot data is not available (VERR_NOT_SUPPORTED)}, preserve=false
00:01:05.931373 ERROR [COM]: aRC=E_INVALIDARG (0x80070057) aIID={93269330-48ca-4096-b4a2-1189df336267} aComponent={Host} aText={The host network interface with the given name could not be found}, preserve=false

Thanks.

[Martin]

You can zip your logfile and attach it directly with the "Upload attachment" function below the message entry box.

[Giusi]

any way it seems you have a win 8 host..not a win 10...

see yr report:

"00:00:00,000000 main OS Product: Windows 8"....

[marcello.g]

any way it seems you have a win 8 host..not a win 10...

see yr report:

"00:00:00,000000 main OS Product: Windows 8"....

I saw it, too.
But I assure you it is windows 10 (see attachment)

w10.png (45.08 KiB) Viewed 6231 times

[Larry Menard]

My log says Windows 10...

VirtualBox COM Server 4.3.30 r101610 win.amd64 (Jul 10 2015 12:21:05) release log
00:00:00.015635 main Log opened 2015-08-26T13:05:11.967031100Z
00:00:00.015635 main Build Type: release
00:00:00.015635 main OS Product: Unknown NT v10.0
00:00:00.015635 main OS Release: 10.0.10240
00:00:00.015635 main OS Service Pack:
00:00:00.046877 main DMI Product Name:
00:00:00.046877 main DMI Product Version: To be filled by O.E.M.
00:00:00.046877 main Host RAM: 16303MB total, 13510MB available
00:00:00.046877 main Executable: C:\Program Files\Oracle\VirtualBox\VBoxSVC.exe
00:00:00.046877 main Process ID: 7368
00:00:00.046877 main Package type: WINDOWS_64BITS_GENERIC

[Larry Menard]

I took marcello.g's advice and tried installing VBox 5 (5.0.2 to be precise).

Now things are even worse.

When I try to start the VM I get:

RTR3InitEx failed with rc=-1912 (rc=-1912)

I have no choice but to select "Abort". When I do, I get:

Failed to open a session for the virtual machine CentOS 6.5 64-bit.

The virtual machine 'CentOS 6.5 64-bit' has terminated unexpectedly during startup with exit code 1 (0x1). More details may be available in 'C:\Users\Larry\VirtualBox VMs\CentOS Linux\CentOS 6.5 64-bit\Logs\VBoxStartup.log'.

Result Code: E_FAIL (0x80004005)
Component: MachineWrap
Interface: IMachine {f30138d4-e5ea-4b3a-8858-a059de4c93fd}

Please see attached VBoxStartup.log file.

I think I'll be reinstalling 4.3.3...

[Giusi]

@marcello.g:

you execute vbox.exe in compatibility mode..that is the answer...
you have to uncheck the compat. mode...

[marcello.g]

@marcello.g:

you execute vbox.exe in compatibility mode..that is the answer...
you have to uncheck the compat. mode...

it's right:

00:00:00.015627 main Build Type: release
00:00:00.015627 main OS Product: Windows 10
00:00:00.015627 main OS Release: 10.0.10240
00:00:00.015627 main OS Service Pack:

thanks