VirtualBox 4.3.28 VERR_INTNET_FLT_IF_NOT_FOUND

[Joseph74]

Hi,
I use Windows 7 64 with VirtualBox 4.3.28 r100309
I can't start any VM with bridge configuration
-----------------------
Apertura di una sessione per la Macchina Virtuale CentOS 6.6 x64 non riuscita.
Failed to open/create the internal network 'HostInterfaceNetworking-Realtek PCIe GBE Family Controller' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).

Codice 'uscita: E_FAIL (0x80004005)
Componente: Console
Interfaccia: IConsole {8ab7c520-2442-4b66-8d74-4ff1e195d2b6}
-----------------------


When i choose NAT then my VM launches without any problem
Any idea to resolve this ?
Thank you !

[aleksey-vb]

Please post the log file and the output of 'VBoxManage list bridgedifs'.

[Joseph74]

Thank you for your reply.
This is the log file:

[mpack]

Please post the log file and the output of 'VBoxManage list bridgedifs'.

You missed a bit.

[Joseph74]

sorry.
vboxmanage list bridgedifs:

Code: Select all

C:\Program Files\Oracle\VirtualBox>vboxmanage.exe list bridgedifs
Name:            Realtek PCIe GBE Family Controller
GUID:            dcca0567-0ba4-4e03-bd18-8320478c68ed
DHCP:            Disabled
IPAddress:       192.168.0.2
NetworkMask:     255.255.255.0
IPV6Address:     fe80:0000:0000:0000:d47b:92db:fd08:1f23
IPV6NetworkMaskPrefixLength: 64
HardwareAddress: 44:8a:5b:9f:55:51
MediumType:      Ethernet
Status:          Up
VBoxNetworkName: HostInterfaceNetworking-Realtek PCIe GBE Family Controller

Name:            VirtualBox Host-Only Ethernet Adapter
GUID:            008a9a22-5ee8-45dd-9a68-9f4e64fc731a
DHCP:            Disabled
IPAddress:       192.168.56.1
NetworkMask:     255.255.255.0
IPV6Address:     fe80:0000:0000:0000:c993:be1c:9205:6233
IPV6NetworkMaskPrefixLength: 64
HardwareAddress: 08:00:27:00:1c:1d
MediumType:      Ethernet
Status:          Up
VBoxNetworkName: HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter

thanks.

[Joseph74]

up.

[mpack]

I see nothing wrong with the config, I can only assume that there's something unusual about the network card. Is it actually an Ethernet LAN card, i.e. not dialup? Not a winmodem? I note that the device name is very non-networky.

[scottgus1]

Mpack, if the "name" you're wondering about is "Realtek PCIe GBE Family Controller", that's definitely a network card; at least two of my working hosts have that name for the physical on-board network ports that Virtualbox sees.

[mpack]

I don't doubt that it's used for networking. My question is whether it is really a traditional Ethernet card, or is it a software trick similar to the old WinModem. I'm just suspicious because it says "PCIe ... Controller". What part of the name indicates the network role?

[mpack]

In fact it might be useful to see the output of "ipconfig /all" run on the host. I want to see if the host considers this to be a currently working LAN interface.

[Perryg]

It is a true adapter Don. I believe this is what they had in mine with the GBE
Realtek PCIe Giga Bit Ethernet Family Controller

[mpack]

Ah... Thanks Perry.

[Joseph74]

Hi,
thanks to everyone for your answers.
the motherborad is http://www.msi.com/product/mb/Z97_GUARD ... o-overview

This is ipconfig on the host:

Code: Select all

Microsoft Windows [Versione 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Tutti i diritti riservati.

C:\Users\Joseph>ipconfig

Configurazione IP di Windows

Scheda Ethernet Connessione alla rete locale (LAN):

   Suffisso DNS specifico per connessione:
   Indirizzo IPv6 locale rispetto al collegamento . : fe80::d47b:92db:fd08:1f23%11
   Indirizzo IPv4. . . . . . . . . . . . : 192.168.0.2
   Subnet mask . . . . . . . . . . . . . : 255.255.255.0
   Gateway predefinito . . . . . . . . . : fe80::66d1:a3ff:fe2c:aa19%11
                                           192.168.0.1

Scheda Ethernet VirtualBox Host-Only Network:

   Suffisso DNS specifico per connessione:
   Indirizzo IPv6 locale rispetto al collegamento . : fe80::c993:be1c:9205:6233%17
   Indirizzo IPv4. . . . . . . . . . . . : 192.168.56.1
   Subnet mask . . . . . . . . . . . . . : 255.255.255.0
   Gateway predefinito . . . . . . . . . :

Scheda Tunnel isatap.{DCCA0567-0BA4-4E03-BD18-8320478C68ED}:

   Stato supporto. . . . . . . . . . . . : Supporto disconnesso
   Suffisso DNS specifico per connessione:

Scheda Tunnel Teredo Tunneling Pseudo-Interface:

   Stato supporto. . . . . . . . . . . . : Supporto disconnesso
   Suffisso DNS specifico per connessione:

Scheda Tunnel isatap.{008A9A22-5EE8-45DD-9A68-9F4E64FC731A}:

   Stato supporto. . . . . . . . . . . . : Supporto disconnesso
   Suffisso DNS specifico per connessione:

Thanks.

[Joseph74]

up.

[mpack]

Hmm. I assumed you would see for yourself that your RealTek card doesn't seem to listed as an available interface in the ipconfig output. Obviously if the card doesn't exist then you can't bridge to it. Have you perhaps disabled this card?