virtualbox.org

Hello.

Sorry, but i speak little english, i have a problem with the bridge connection on the virtual machinned, i configured a manual ip config on my virtual machine in the same network(LAN) that the server, with other ip number, i can do ping between the VM and the host, but the VM is not visible for anothers pc on the LAN, i use windows Server 2012 64 bits 16 GB RAM on the host, VirtualBOx Version 4.3.26 , briget LAN and windows 2003 64 bits server 5 GB RAM in the guest whith a virtual disk that is copy of a SAP development server.

Please Help Me!!

Did you try switching off the Windows firewall of your Windows Server 2012?

Yes, i switch off the firewall on windows server.

Thanks for your reply!!!

Why did you configure a static IP manually? Doesn't your LAN have a DHCP server?

It is always best (and easiest) to allow a bridged adapter to get an IP from DHCP if possible.

No, for server operating system you normally never use DHCP. Many server services don't work correctly with dynamically assigned addresses.

Very true, but you need to get the network config working before you start configuring server roles.

Check in your Host OS Device Manager (I'm assuming your Host OS is Windows) if the bridged network adapters are actually working or if they have yellow icon with exclamation mark on them.

Check here: viewtopic.php?f=6&t=66488 and here: viewtopic.php?f=2&t=64029

Full credit for the fix goes to MartinŠ.

Thanks for yor help.

Yes, the network connection is working fine in the host server, i have LAN access on the host server.