Page 1 of 1
sptd.sys - page fault in nonpaged area
Posted: 23. Jun 2014, 14:35
by Aemme
Good Afternoon,
I am trying to use virtualbox in a windows 7 32 bit environment with an imagine created with disk2vhd.
The imagine comes fom the same machine wher I ma usin Virtual box, for the moment, because afterward I will use this imagine on portable pc running with a Windows 8.1 64 bit.
I have loaded the imagine with Virtualbox but it gives the following error "sptd.sys" PAGE_FAULT_IN_NON_PAGED_AREA. (See attached file).
The configuration for the archive is the one in attachmet Archiviazione.
Do you know why itis happening such error...??
Many Thanks For Your Help
Re: sptd.sys - page fault in nonpaged area
Posted: 24. Jun 2014, 09:32
by socratis
http://www.neuber.com/taskmanager/process/sptd.sys.html wrote:sptd.sys is a system driver that implements the SCSI Pass Through Direct standard by Duplex Secure Ltd. This is an application program interface that is similar to ASPI in that it enables access to optical devices. It is used by the CD/DVD burning products Daemon Tools and Alcohol 120% and should not be terminated if using either.
Start up in safe mode (press F8 during startup) and uninstall any program mentioned above.
Re: sptd.sys - page fault in nonpaged area
Posted: 24. Jun 2014, 14:17
by Aemme
I tried to run in Safe Mode but I don't know for which reason I can't....the F8 seem not working....any idea...?
I have removed the Alcohol52 from the physical machine and then I create again the VHD file but it gives the same error....
I would like to start in Safe Mode....
Which are the other Daemon Tools...?
Re: sptd.sys - page fault in nonpaged area
Posted: 24. Jun 2014, 14:49
by loukingjr
Aemme wrote:I tried to run in Safe Mode but I don't know for which reason I can't....the F8 seem not working....any idea...?
This should help...
Start In Safe Mode
Re: sptd.sys - page fault in nonpaged area
Posted: 24. Jun 2014, 15:14
by Aemme
I know I can use the msconfig but I would like to run Safe Mode by F8 key.
In my machine the F8 key is set for the BBS setup, to choose where to start the SO from....
I have also take a SCSI card from the hardware but the the safe mode nothing doesn't start....
Re: sptd.sys - page fault in nonpaged area
Posted: 24. Jun 2014, 15:26
by loukingjr
Then I would suggest as soon as you start your guest you repeatedly hit your F8 key and hope the guest catches the keystrokes.
Re: sptd.sys - page fault in nonpaged area
Posted: 24. Jun 2014, 18:55
by Aemme
...yes but I have uninstaleld Alcohol52 so it shouldn't give this error? What I have to do to take the sptd.sys error out in the physical machine?
Re: sptd.sys - page fault in nonpaged area
Posted: 25. Jun 2014, 07:28
by jorgensen
Just delete the file, and remove it from the registry, with a registry cleaner program.
Re: sptd.sys - page fault in nonpaged area
Posted: 25. Jun 2014, 12:53
by Aemme
ok, last night I have corrected an error in BCD and MBR of the disk C:\ where this imagine come from and so I was able to use the F8 key...
..so I have created a new imagine from the physical machine and then I have loaded it as guest in virtual box and the F8 worked there too...
...unfortunately the error was the same also for the Safe Mode...
I have found a program that uninstall or update the sptd key I can use that...?
The link is this:
http://www.duplexsecure.com/downloads
Re: sptd.sys - page fault in nonpaged area
Posted: 27. Jun 2014, 07:56
by Aemme
jorgensen wrote:Just delete the file, and remove it from the registry, with a registry cleaner program.
What about the installation after I have deleted the file? Which are the programs that use this file...? What about Nero for example?
Re: sptd.sys - page fault in nonpaged area
Posted: 27. Jun 2014, 10:34
by jorgensen
Programs for burning a cd or dvd should not be installed at the guest - instead burn from the host.
Likewise some virtual cd programs will crash a guest, because the drive is virtualized.
Re: sptd.sys - page fault in nonpaged area
Posted: 28. Jun 2014, 16:34
by Aemme
The F8 Key now works and I started the guest in Safe Mode but the followinng error is shown:
Code: Select all
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. disable the driver or check with the manifacturer for driver update. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select Safe Mode
Technical Information:
*** STOP: 0000007E (0x0000005,ox47F1BDC7,080D869C0,0X80D865A0)
I would delete the sptd file form windows and from the registry but the guest doesn't start in Safe Mode...
Could be now that there isn't enough space on disk C: because Vbox is installed there...? I have created the VHD file on disk D on purpose for this reason...
Any advice??
Re: sptd.sys - page fault in nonpaged area
Posted: 29. Jun 2014, 08:37
by Aemme
I have uninstalled the sptd from the physical machine and creted again thd VHD file, the I used it with Vbox and it works!!
Both the safe mode and the normal mode.
Thank you very much!!!
The link of the program to uninstall the sptd.sys is this:
http://www.duplexsecure.com/downloads or this
http://daemonpro-help.com/en/problems_a ... blems.html
I used the first.
Thanks very much!!!