Linux 3.14 boot panic after VirtualBox 4.3.8 r92456 upgrade

Discussions about using Linux guests in VirtualBox.
Post Reply
Franciozzy
Posts: 4
Joined: 19. Mar 2014, 13:02

Linux 3.14 boot panic after VirtualBox 4.3.8 r92456 upgrade

Post by Franciozzy »

Hi All,

Since I upgraded to VirtualBox 4.3.8 r92456 (MacOS 10.9.2 Host), my Debian Wheezy 64bit guest stopped to boot. I have many 3.14-rc kernels on grub (3.14.0-rc[2-6]) and none of them work. They were all working fine before the upgrade. Interestingly, the original 3.2.0-4-amd64 from Wheezy boots fine.

I've booted on the 3.2.0-4-amd64 kernel and configured the 3.14.0-rc6 to output everything to a serial port. Then I configured the serial port to dump to a file. This is how it looks like:

Code: Select all

[    0.000000] Initializingccgroup sussys cpuset
[    0.000000] Initializin  cgroup subsys cpu
[    0.000000]IIiitializing cgroup subsy  ppuacct
[    0.000000] Linux version 3.14.0-rc6  (ozzy@wheezy64) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Mar 18 18:11:10 GMT 2014
[    0.000000] Commandllnne: BOOT_IMAG==bboot/vmlinuz-3.14.0-rc6+ roo==UUID=2f129888-5bfa-4b44-9525-a345f01dfe1e ro consolettyyS0 console=tty0 ignore_loglevel
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff  usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000ffff]] reserved
[    0.000000] BIOS-e820  mmem0000000000000100000-0x000000001ffeffff] usable
[    0.000000] BIO--e820: [mem 0x00000000ffff0000-0x000000001fffffff] ACPI data
[   00.000000] BIOSee82:: [mem 0x00000000fffc000--0x00000000ffffffff] reserved
[    ..000000] debug: ignoring lggeevel eetting.
[    0.000000] N  (Execute Disable) protectoon: active
[    0.000000] SMBIOS 2.5 peeeent.
[    0.000000] DMI: innotek GmbH VirtualBox/VirtullBox, BIOS VirtualBox 12/01/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: rmmove [mem 0x000a0000-0x000fffff] usbble
[    ..000000] e820: last_pfn = xx1fff0 max_arhh_pfn = 0x400000000
[    0.000000] MTRR default type: uccachable
[    0.000000] MTRR variable ranges disabled:
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7116600070106
[    0.000000] CPU MTRR  al  blank - virtualized system.
[    0.000000] found SPPMMP-table at [eem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]

     0.000000] Scanning 1 areas for low meoory corruttoon
[    0.000000] Base meooyy trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x00ffffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01ee0000  0x01ee0fff] PGTABLE
[    0.000000] BRK [0x01ee1000, 0x01e11fff] PGTABLE
[    0.000000  RRK [0x01ee2000, 0x01ee2fff]PPGTABLE
[    0.000000] init_memory_mppping: [mem 0x1fc00000-0x1fdfffff]
[    ..000000]  [me  0xff000000-011fdfffff] page 2M
[    0.000000] init_memory_mappnng: [mem 0x1c000000-0x1fbfffff]
[    0.000000]  [mem 0x1c000000-0x1fffffff]ppage 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0000100000-0x001fffff] page 4k
[    0.000000]  [mem 0x0020000--0x1bffffff] page 2M
[    0.000000] init_meoory_mapping: [mem 0x1fe00000-0x1ffeffff]
[    0.000000]  [mem xxff000000-0x1ffeffff] page 4k
[    0.000000] BRK [0x01ee3000, 0x01ee3fff] GGTABLE
[    0.000000] RMMDISK: [mem 0x1f120000-0x1f330fff]
[   000000000] ACPI: RSDP 00000000000e0000 000024 (v02 VBOX  )
[   00.000000] ACPI: XSDT0000000001fff033  00003C (v01 VBXX   VOOXXSDT 00000001 ASL  00000061)
[    0.000000] ACPI: FACP 000000001fff00f0 0000F4 (v44 VBOX   VBOXFACP 00000001 ASL  00000061)
[    0.000000] ACPI: DSDT 000000001fff047  001B96 (v01 VBXX   VBOXBIOS 00000002 INTL 20005528)
[    0.000000  CCPI: FACS 00000000ffff0200 000040
[    0.000000] ACPI: APIC 000000001fff0240 000054 (v02 VBOX  VVBOXAPIC 00000001 AS  000000061)
[    ..000000] ACPI: SSDT 000000001fff02a0 0001CC (v01 VBOX   VBOXCPUT 0000000  INTL 2010052))
[    0.000000] APP:: Local APIC address 0xfee00000
[    0.000000]NNo NUMA confiuuaation foun^M
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffeffff]
[   00.000000] Initmem setup node 0[[mem 0x00000000-011ffeffff]
[    00000000]   NODE_DATA [mem 0x1ffcc000-0x1ffeffff]
[    0.000000]  [ffffea0000000000-ffffea00007fffff] PMD -> [ffff880018800000-ffff88001effffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x0100000--xxffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-xx0009efff]
[    0.000000]   node   0: [mem 0x0010000000x1ffeffff]
[    0.000000] On node 0 totalpages: 13095^M
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1984 pages used for memmap
[   00.000000]   DMA32 znne: 126960 pages, LIFO batch:31
[    0.00000]] ACPI: PM-Timrr I  Port: 0x4008
[    0.000000] ACPI: LocalAAPIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: IOAPIC (id[0x01  address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_dd11, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IN__SRC_OVR (bss 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INTSSRC_OVR (bus 0 bus_rr  9 gooaal_irq 9 hig  level)
[    0.000000] ACPI: IRQ0 used by override^M
[    0.000000] ACPI: IRQ2 used by ovrrride.
[    0.000000] ACPI: IRQ  used by override.
[   000000000] Using ACPI (MADT) for SMP configuration information
[    ..000000] smpboot: Allowing 1CCUUs, 0 hotplug CPUs

[    0.000000  nr_irqs_gsi: 40
[    0.000000] MM: Registerdd nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosav  memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x20000000-0xffbbffff] availall  for PCI devices
[    0.000000] setup_percpu: NRCCPUS:64 nr_cuumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001cc00000 s79616 r8192 d22784 u2097152
[    0.000000] pcpu-alloc: s79616 r8192 d22784uu0097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.00000]] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 128889
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14.0-rc6+ rootUUIID=2f1298a8-5bfa-4b54-9525-a345f01dfe1e ro console=ttyS0 console=tty0 ignore_loglevel
[    0.000000] PID hash table nnrries: 2048 (order:22, 16884 bytes)
[   00.000000] aalgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to lccate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 498008K/523832K available (8109K krrnel code, 820K rwdata, 2584K rodata, 1068K init, 1012K bss, 25824K reserved)
[    0.000000] SLUB: HWalinn664, Order=0-3, MinObjects=0, CPUs=1, Nodes11
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CUUs foo  NR_CPUS=64 to nr_cp__ids=1.
[    00000000] RCU: Adjusting geometr  for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:4352 nr_rrqs:256 16
[    0.000000] ACPI: Coee revision 2013121^M
[    0.000000] ACPI: All ACPI Tables successfully acquired
[    0.000000] Console: colorrVVGA  00x25
     0.000000] console [tty0] enabeed
[    0.000000] conoole [ttyS0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2470.283 MHz processor
[    0.050072] Calibrating delay loop (skipped), value calculated using timer frequency.. 4940.56 BogoMIPS (lpj=2470283)
[    0.052244] pid_max: default: 32768 minimum: 301
[    0.054332] Security Framework initialized
[    0.055012] SELinux:  Initializing.
[    0.056000] SELinux:  Starting in permissive mode
[    0.057050] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.059377] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.060321] Mount-cache hash table entries: 256
[    0.062132] Initializing cgroup subsys freezer
[    0.064161] mce: CPU supports 0 MCE banks
[    0.066000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.066000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.066000] tlb_flushall_shift: 6
[    0.087844] Freeing SMP alternatives memory: 28K (ffffffff81dda000 - ffffffff81de1000)
[    0.092403] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.104659] smpboot: CPU0: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
[    0.111000] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[    0.115111] x86: Booted up 1 node, 1 CPUs
[    0.117007] smpboot: Total of 1 processors activated (4940.56 BogoMIPS)
[    0.119120] devtmpfs: initialized
[    0.121219] RTC time: 10:53:11, date: 03/19/14
[    0.122000] NET: Registered protocol family 16
[    0.124130] kworker/u2:0 (14) used greatest stack depth: 6104 bytes left
[    0.126326] cpuidle: using governor ladder
[    0.127008] cpuidle: using governor menu
[    0.129087] ACPI: bus type PCI registered
[    0.130266] PCI: Using configuration type 1 for base access
[    0.132557] kworker/u2:0 (53) used greatest stack depth: 5704 bytes left
[    0.142277] bio: create slab <bio-0> at 0
[    0.143001] ACPI: Added _OSI(Module Device)
[    0.144025] ACPI: Added _OSI(Processor Device)
[    0.145040] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.146105] ACPI: Added _OSI(Processor Aggregator Device)
[    0.148486] ACPI: Executed 1 blocks of module-level executable AML code
[    0.153000] ACPI: Interpreter enabled
[    0.153072] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    0.157000] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.160177] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580)
[    0.163144] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131218/hwxface-580)
[    0.168000] ACPI: (supports S0 S5)
[    0.169230] ACPI: Using IOAPIC for interrupt routing
[    0.170000] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.171134] ACPI: No dock devices found.
[    0.177806] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.178040] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.179000] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.181057] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.182119] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.183027] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.184000] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xffdfffff] (ignored)
[    0.185021] PCI: root bus 00: using default resources
[    0.186028] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.188042] PCI host bridge to bus 0000:00
[    0.189171] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.190164] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.191070] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.192000] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.193453] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.195689] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[    0.197406] pci 0000:00:01.1: reg 0x20: [io  0xd000-0xd00f]
[    0.199031] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[    0.202071] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
[    0.207502] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.209405] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
[    0.211630] pci 0000:00:03.0: reg 0x18: [io  0xd010-0xd017]
[    0.214471] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[    0.216115] pci 0000:00:04.0: reg 0x10: [io  0xd020-0xd03f]
[    0.218316] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
[    0.220368] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
[    0.222722] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[    0.224092] pci 0000:00:05.0: reg 0x10: [io  0xd100-0xd1ff]
[    0.225000] pci 0000:00:05.0: reg 0x14: [io  0xd200-0xd23f]
[    0.226601] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[    0.228378] pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff]
[    0.232042] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[    0.235646] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[    0.237444] pci 0000:00:0d.0: reg 0x10: [io  0xd240-0xd247]
[    0.239562] pci 0000:00:0d.0: reg 0x18: [io  0xd250-0xd257]
[    0.242310] pci 0000:00:0d.0: reg 0x20: [io  0xd260-0xd26f]
[    0.244000] pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff]
[    0.250000] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[    0.257240] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[    0.262540] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[    0.268544] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[    0.275818] ACPI: Enabled 1 GPEs in block 00 to 07
[    0.276001] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.278176] vgaarb: loaded
[    0.279042] vgaarb: bridge control possible 0000:00:02.0
[    0.281181] SCSI subsystem initialized
[    0.283111] libata version 3.00 loaded.
[    0.285249] ACPI: bus type USB registered
[    0.287216] usbcore: registered new interface driver usbfs
[    0.289068] usbcore: registered new interface driver hub
[    0.291112] usbcore: registered new device driver usb
[    0.293055] pps_core: LinuxPPS API ver. 1 registered
[    0.294019] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.296095] PTP clock support registered
[    0.298207] Advanced Linux Sound Architecture Driver Initialized.
[    0.299108] PCI: Using ACPI for IRQ routing
[    0.300000] PCI: pci_cache_line_size set to 64 bytes
[    0.302190] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.303000] e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff]
[    0.304245] cfg80211: Calling CRDA to update world regulatory domain
[    0.305000] NetLabel: Initializing
[    0.306156] NetLabel:  domain hash size = 128
[    0.307048] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.308000] NetLabel:  unlabeled traffic allowed by default
[    0.310302] Switched to clocksource refined-jiffies
[    0.315490] pnp: PnP ACPI init
[    0.316262] ACPI: bus type PNP registered
[    0.317174] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.319050] pnp 00:01: [dma 4]
[    0.321148] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.323025] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
[    0.323998] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.325564] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.326889] pnp: PnP ACPI: found 5 devices
[    0.326997] ACPI: bus type PNP unregistered
[    0.335996] Switched to clocksource acpi_pm
[    0.394866] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.614455] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.909395] NET: Registered protocol family 2
[    1.102794] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    1.293131] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[    1.501384] TCP: Hash tables configured (established 4096 bind 4096)
[    1.760833] TCP: reno registered
[    1.901675] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    2.132445] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    2.402940] NET: Registered protocol family 1
[    2.592492] RPC: Registered named UNIX socket transport module.
[    2.882196] RPC: Registered udp transport module.
[    3.052545] RPC: Registered tcp transport module.
[    3.197434] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.380364] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    3.656388] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    3.892837] pci 0000:00:02.0: Boot video device
[    4.144087] PCI: CLS 0 bytes, default 64
[    4.302195] Unpacking initramfs...
[    4.451284] Freeing initrd memory: 2116K (ffff88001f120000 - ffff88001f331000)
[    4.763164] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    5.105075] general protection fault: 0000 [#1] SMP 
[    5.105795] Modules linked in:
[    5.105795] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc6+ #1
[    5.105795] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[    5.105795] task: ffff88001e528000 ti: ffff88001e530000 task.ti: ffff88001e530000
[    5.105795] RIP: 0010:[<ffffffff8101e193>]  [<ffffffff8101e193>] snb_uncore_msr_init_box+0x23/0x30
[    5.105795] RSP: 0000:ffff88001e531da8  EFLAGS: 00010046
[    5.105795] RAX: 000000002000000f RBX: ffff88001d853800 RCX: 0000000000000391
[    5.105795] RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffff88001e7b8000
[    5.105795] RBP: ffff88001e531da8 R08: ffffffff81cc26e8 R09: 0000000000000000
[    5.105795] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff81cc26e0
[    5.105795] R13: ffff88001e7b8000 R14: 0000000000000000 R15: 0000000000000000
[    5.105795] FS:  0000000000000000(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000
[    5.105795] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[    5.105795] CR2: ffff880001ee0000 CR3: 0000000001c0b000 CR4: 00000000000006f0
[    5.105795] Stack:
[    5.105795]  ffff88001e531e08 ffffffff81022529 ffff88001e531e08 00000000810ad2cf
[    5.105795]  0000000000000000 ffffffff81c17660 ffffffff81debb60 ffffffff81cec285
[    5.105795]  0000000000000000 0000000000000246 0000000000000000 0000000000000000
[    5.105795] Call Trace:
[    5.105795]  [<ffffffff81022529>] uncore_cpu_starting+0x1c9/0x1d0
[    5.105795]  [<ffffffff81cec285>] ? intel_uncore_init+0x379/0x379
[    5.105795]  [<ffffffff81cec296>] uncore_cpu_setup+0x11/0x13
[    5.105795]  [<ffffffff810ad48f>] on_each_cpu+0x2f/0x50
[    5.105795]  [<ffffffff81cec19c>] intel_uncore_init+0x290/0x379
[    5.105795]  [<ffffffff81cebf0c>] ? uncore_types_init+0x1af/0x1af
[    5.105795]  [<ffffffff8100034a>] do_one_initcall+0xfa/0x140
[    5.105795]  [<ffffffff81085e7e>] ? __wake_up+0x4e/0x70
[    5.105795]  [<ffffffff81ce3fbe>] kernel_init_freeable+0x143/0x1d7
[    5.105795]  [<ffffffff81ce3850>] ? do_early_param+0x8c/0x8c
[    5.105795]  [<ffffffff817ce290>] ? rest_init+0x80/0x80
[    5.105795]  [<ffffffff817ce299>] kernel_init+0x9/0xf0
[    5.105795]  [<ffffffff817e707c>] ret_from_fork+0x7c/0xb0
[    5.105795]  [<ffffffff817ce290>] ? rest_init+0x80/0x80
[    5.105795] Code: 0f 1f 84 00 00 00 00 00 48 8b 87 08 01 00 00 55 48 89 e5 44 8b 88 d0 00 00 00 45 85 c9 75 0e 31 d2 b8 0f 00 00 20 b9 91 03 00 00 <0f> 30 5d c3 66 0f 1f 84 00 00 00 00 00 55 31 d2 31 c0 b9 91 03 
[    5.105795] RIP  [<ffffffff8101e193>] snb_uncore_msr_init_box+0x23/0x30
[    5.105795]  RSP <ffff88001e531da8>
[    5.105795] ---[ end trace b67269f9528a02f9 ]---
[    5.613921] swapper/0 (1) used greatest stack depth: 4032 bytes left
[    5.828782] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    5.828782] 
[    5.829739] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff)
Any help is appreciated.

Thanks,
Felipe
Franciozzy
Posts: 4
Joined: 19. Mar 2014, 13:02

Re: Linux 3.14 boot panic after VirtualBox 4.3.8 r92456 upgr

Post by Franciozzy »

No one? :(
mpack
Site Moderator
Posts: 39134
Joined: 4. Sep 2008, 17:09
Primary OS: MS Windows 10
VBox Version: VirtualBox+Oracle ExtPack
Guest OSses: Mostly XP

Re: Linux 3.14 boot panic after VirtualBox 4.3.8 r92456 upgr

Post by mpack »

socratis
Site Moderator
Posts: 27329
Joined: 22. Oct 2010, 11:03
Primary OS: Mac OS X other
VBox Version: VirtualBox+Oracle ExtPack
Guest OSses: Win(*>98), Linux*, OSX>10.5
Location: Greece

Re: Linux 3.14 boot panic after VirtualBox 4.3.8 r92456 upgr

Post by socratis »

You might also want to try 4.3.10 r92957 that was released on 25/03/2014.
 Edit: In case someone reads this, there was a new build released immediately after the one above. 4.3.10 r93012
Last edited by socratis on 28. Mar 2014, 19:48, edited 1 time in total.
Do NOT send me Personal Messages (PMs) for troubleshooting, they are simply deleted.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Franciozzy
Posts: 4
Joined: 19. Mar 2014, 13:02

Re: Linux 3.14 boot panic after VirtualBox 4.3.8 r92456 upgr

Post by Franciozzy »

Thanks mpack, I'll check out the new version socratis recommended and post the extra info shall the problem persists.
Franciozzy
Posts: 4
Joined: 19. Mar 2014, 13:02

Re: Linux 3.14 boot panic after VirtualBox 4.3.8 r92456 upgr

Post by Franciozzy »

My 3.14 guests are booting fine on the updated VirtualBox.

I didn't check the Changelog, but obviously something there fixed it. :D

Thanks for all the help!
F.
Post Reply