Page 1 of 1
[solved] Gentoo64 doesn´t start in 4.3.8
Posted: 28. Feb 2014, 20:35
by ManfredB
Hello friends of VirtualBox.
I installed Gentoo 64bit in VirtualBox-4.3.6 (a new installation also in 4.3.
.
But Gentoo doesn´t boot, CPU 100%, but nothing goes on. In 4.3.6 no problems.
What is the reason for that?
I cannot post any log therefore.
Has anyone an idea, what I can do to boot Gentoo in 4.3.8?
Manfred
Re: Gentoo64 doesn´t start in 4.3.8
Posted: 28. Feb 2014, 21:18
by Perryg
Was the guest shut down ( not saved state ) when you upgraded?
Re: Gentoo64 doesn´t start in 4.3.8
Posted: 28. Feb 2014, 23:13
by ManfredB
Yes, the guest was down.
I close all VBox-guests, before I upgrade VirtualBox.
Manfred
Re: Gentoo64 doesn´t start in 4.3.8
Posted: 28. Feb 2014, 23:31
by Perryg
Without any diagnostic it will be all but impossible to troubleshoot. Why can't there be a log file?
Re: Gentoo64 doesn´t start in 4.3.8
Posted: 1. Mar 2014, 04:13
by RobBrownNZ
I have what may be the same problem, on both 64-bit and 32-bit, with a variety of 3.12/3.13 kernels. I've tried with and without the extension pack, and also tried changing the chipset from PIIX3 to ICH9 (well, it was the only thing I could think of...).
I get a kernel panic:
Code: Select all
0000000000000000 ffffffff81089458 0000000000000000 0000000000000004
Call Trace:
[<ffffffff8101b417>] ? uncore_cpu_starting+0x97/0x1e0
[<ffffffff81780df3>] ? intel_pmu_init+0x8d8/0x8d8
[<ffffffff81089458>] ? on_each_cpu+0x28/0x60
[<ffffffff81781355>] ? intel_uncore_init+0x282/0x366
[<ffffffff817810d3>] ? uncore_pmu_register+0xbf/0xbf
[<ffffffff810002ea>] ? do_one_initcall+0xea/0x130
[<ffffffff8105a752>] ? parse_args+0x1f2/0x320
[<ffffffff8177ae0e>] ? kernel_init_freeable+0x106/0x188
[<ffffffff8177a7c5>] ? do_early_param+0x81/0x81
[<ffffffff81529db0>] ? rest_init+0x80/0x80
[<ffffffff81529db5>] ? kernel_init+0x5/0x110
[<ffffffff8153543c>] ? ret_from_fork+0x7c/0xb0
[<ffffffff81529db0>] ? rest_init+0x80/0x80
Code: 01 00 00 31 d2 31 c0 0f 30 c3 66 90 48 8b 87 08 01 00 00 44 8b 88 d0 00 00
00 45 85 c9 75 0e 31 d2 b8 0f 00 00 20 b9 91 03 00 00 <0f> 30 f3 c3 66 66 66 66
2e 0f 1f 84 00 00 00 00 00 31 d2 31 c0
RIP [<ffffffff8101acdf>] snb_uncore_msr_init_box+0x1f/0x30
RSP <ffff8800?d045e10>
———[ end trace eec7c4ed8ee80114 ]———
note: Swapper/0[1] exited with preempt_count 1
Kernel panic — not syncing: attempted to kill init! exitcode=0x0000000b
The log file from a 64-bit boot, without the extension pack, is attached. Note that it boots quickly to the kernel panic, and then 55 minutes later I closed the VM.
Please let me know if there's anything else I can provide.
Thanks,
Rob.
Re: Gentoo64 doesn´t start in 4.3.8
Posted: 1. Mar 2014, 04:24
by Perryg
What are these?
Code: Select all
00:00:00.395484 File system of 'W:\VMShared\projects.vdi' is ntfs
00:00:00.397024 File system of 'W:\VMShared\swap.vdi' is ntfs
00:00:00.398698 File system of 'W:\OSX\mountainlion.vdi' is ntfs
Re: Gentoo64 doesn´t start in 4.3.8
Posted: 1. Mar 2014, 04:48
by RobBrownNZ
Oh, just collections of random junk
The projects vdi is shared with my 32-bit VM. In case you're interested, the type identification is wrong: projects.vdi is ext4, swap.vdi is Linux swap, and mountainlion.vdi is some fruity Californian thing...
I tried again with just the single root vdi and it made no difference.
(Edit: perhaps the 'ntfs' refers to the file system
containing the vdi files, in which case it's completely right)
Re: Gentoo64 doesn´t start in 4.3.8
Posted: 1. Mar 2014, 04:57
by Perryg
So if I understand this correctly it did work in a previous version. If that is the case you might want to create a ticket at
bugtracker and include as Much information as you can so the DEVs can look into it.
Re: Gentoo64 doesn´t start in 4.3.8
Posted: 1. Mar 2014, 05:00
by RobBrownNZ
OK, will do. Thanks for your help.
Re: Gentoo64 doesn´t start in 4.3.8
Posted: 1. Mar 2014, 09:44
by RobBrownNZ
Re: Gentoo64 doesn´t start in 4.3.8
Posted: 1. Mar 2014, 10:19
by ManfredB
Under /Gentoo2014/logs I found one log.
You can it see under attachment.
Manfred
P.S. My host is Linux (PCLinuxOS 64bit). Kernel of Gentoo is 3.12.11.
Re: Gentoo64 doesn´t start in 4.3.8
Posted: 1. Mar 2014, 16:47
by Perryg
ManfredB wrote:Under /Gentoo2014/logs I found one log.
You can it see under attachment.
Manfred
P.S. My host is Linux (PCLinuxOS 64bit). Kernel of Gentoo is 3.12.11.
You should go ahead and post this information in the ticket above as well.
Re: Gentoo64 doesn´t start in 4.3.8
Posted: 1. Mar 2014, 17:38
by ManfredB
Done
Manfred
Re: [solved] Gentoo64 doesn´t start in 4.3.8
Posted: 6. Mar 2014, 10:11
by ManfredB
Yesterday I could install Gentoo in VirtualBox-4.3.8 with the kernel-config of the live-cd (kernel 3.10.25).
I could not understand the possibiblity to start a livecd, but after installing gentoo no booting.
The only reason is the kernel-config.
Now I can use gentoo64bit in VirtualBox-4.3.8.
Manfred