I have just updated to the last stable release 4.3.6 running on windows 7 pro 64 bit and now my vm wont start - has the error above.
Please see attached log and png.
Any help appreciated
emR3Debug: rc=VERR_TRPM_DONT_PANIC
emR3Debug: rc=VERR_TRPM_DONT_PANIC
- Attachments
-
- screenshot
- VBox.png (13.45 KiB) Viewed 5549 times
-
- VBox.zip
- log file
- (49.43 KiB) Downloaded 13 times
-
Perryg
- Site Moderator
- Posts: 34369
- Joined: 6. Sep 2008, 22:55
- Primary OS: Linux other
- VBox Version: OSE self-compiled
- Guest OSses: *NIX
Re: emR3Debug: rc=VERR_TRPM_DONT_PANIC
00:00:01.424608 WARNING! 64-bit guest type selected but the host CPU does NOT support HW virtualization.
Look at the guest setting and make sure that the version does not say RedHat (64 bit), just RedHat
If it is set properly then run the following in the hosts terminal/command window
Then see if it will boot.
Look at the guest setting and make sure that the version does not say RedHat (64 bit), just RedHat
If it is set properly then run the following in the hosts terminal/command window
Code: Select all
VBoxManage modifyvm <vmname> --longmode offRe: emR3Debug: rc=VERR_TRPM_DONT_PANIC
Yes the version is set to Redhat and not 64 bit.
I ran the vboxmanage command as suggested.
It still failed to start. New logs and screenshot being uploaded.
Not sure whats changed as I have been using this vm for quite some time before with no problems
thanks
I ran the vboxmanage command as suggested.
It still failed to start. New logs and screenshot being uploaded.
Not sure whats changed as I have been using this vm for quite some time before with no problems
thanks
- Attachments
-
- VBox.zip
- (48.12 KiB) Downloaded 9 times
-
- VBox.png (12.54 KiB) Viewed 5538 times
-
Perryg
- Site Moderator
- Posts: 34369
- Joined: 6. Sep 2008, 22:55
- Primary OS: Linux other
- VBox Version: OSE self-compiled
- Guest OSses: *NIX
Re: emR3Debug: rc=VERR_TRPM_DONT_PANIC
Well that took care of the 64-bit warning. But looks like you have something serious going on.
Looks like a gcc error but you would need to talk to the DEVs about it to be sure.
You can post a ticket at bugtracker or try to reach them on IRC tomorrow.
https://www.virtualbox.org/wiki/IRC
Code: Select all
00:01:01.633888 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
00:01:01.633890 !!
00:01:01.633891 !! Guru Meditation -2403 (VERR_TRPM_DONT_PANIC)
00:01:01.633912 !!
00:01:01.633942 !! TRAP=0e ERRCD=0000000000000002 CR2=0000000000000010 EIP=fec26cc3 Type=0 cbInstr=ff
00:01:01.633967 !! EIP in VMMGC.gc (febbf000) at rva 67cc3 near symbols:
00:01:01.633969 !! fec26cb0 rva 00067cb0 off 00000013 PDMQueueInsert
00:01:01.633970 !! fec26d10 rva 00067d10 off -0000004d PDMQueueInsertEx
00:01:01.633998 !! fff8:fec26cc3 89 4e 10 mov dword [esi+010h], ecx
00:01:01.634001 !!
00:01:01.634001 !!
00:01:01.634002 !!
00:01:01.634005 Hypervisor CPUM state: You can post a ticket at bugtracker or try to reach them on IRC tomorrow.
https://www.virtualbox.org/wiki/IRC
Re: emR3Debug: rc=VERR_TRPM_DONT_PANIC
ok thanks for your help