Ubuntu 13.04 not starting after upgrading from 12.10

Discussions about using Linux guests in VirtualBox.
Post Reply
SuperDre
Posts: 11
Joined: 10. May 2013, 17:24

Ubuntu 13.04 not starting after upgrading from 12.10

Post by SuperDre »

Just when I finally had 12.10 running again due to the Guest additions problem of virtual box 4.2.12 (which I had a hard time figuring out that the GA was the problem), and I finally could get into my Ubuntu 12.10, I got a message to upgrade to 13.04, so as a nice boy I let it upgrade... boy do I get to start hating linux badly, as after upgrading to 13.04 it isn't starting anymore..

Windows 7 64bit host (running a 32bit ubuntu), videomem set to 128, 3d enabled (even without it it didn't start).
host has a Nvidia GT430 card, Intel P4 3.6Ghz HT, 4GB mem (client is set to 1GB mem)..

All I see is first a full purple screen, then after a while it turns black, the window resizes to a much larger size, I can see the client mousecursor, then it resizes back to a smaller window and just stays black.
<ALT><F2> works to get a terminal window.

I have tried the following which was said in another thread:

Code: Select all

/usr/lib/nux/unity_support_test -p
but it gave Error: unable to open display
Top
Perryg
Site Moderator
Posts: 34369
Joined: 6. Sep 2008, 22:55
Primary OS: Linux other
VBox Version: OSE self-compiled
Guest OSses: *NIX

Re: Ubuntu 13.04 not starting after upgrading from 12.10

Post by Perryg »

IMHO upgrading to 13.04 is a huge mistake. They changed so many things that the residual from the previous build is more than likely going to cause conflicts. Anyway to your problem. Try disabling 3D in the guests settings and see if that will at least get you to a desktop. From the sounds of it their new display drivers are causing you an issue. If you can not then get to a tty and post the results of the following

Code: Select all

ps aux | grep dkms
and

Code: Select all

glxinfo | grep OpenGL
Top
SuperDre
Posts: 11
Joined: 10. May 2013, 17:24

Re: Ubuntu 13.04 not starting after upgrading from 12.10

Post by SuperDre »

the first command gives me:

<myusername> 2727 0.0 0.0 4428 808 tty2 S+ 22:36 0:00 grep --color=auto dkms

and the second give me the error: unable to open display again (but I did have to install mesa-utils first for the command to work)..

Well, I just updated because linux asked me to.. And linux is perfect according to most people who love linux.. but I had more problems with linux now in the last few weeks, than I ever had with my windows in the last 20 years (and as a developer I do a lot of weird things with windows hehe)..
LOL.. ahwel.. we'll figure this out I hope.. thanx for trying to help..
Top
Perryg
Site Moderator
Posts: 34369
Joined: 6. Sep 2008, 22:55
Primary OS: Linux other
VBox Version: OSE self-compiled
Guest OSses: *NIX

Re: Ubuntu 13.04 not starting after upgrading from 12.10

Post by Perryg »

You can try the following

Code: Select all

sudo apt-get install dkms build-essential linux-headers-$(uname -r)
then

Code: Select all

sudo /etc/init.d/vboxadd setup
Don't worry if the first command says it is already installed. You just need to make sure that you run the command.
Top
SuperDre
Posts: 11
Joined: 10. May 2013, 17:24

Re: Ubuntu 13.04 not starting after upgrading from 12.10

Post by SuperDre »

first command did install some stuff and some stuff was already installed.

second command couldn't be found.. But I guess that's due to me having deinstalled the guest additions when I still had ubuntu 12.10 because of the 4.2.12 problems I had, and hadn't reinstalled it I guess with the fixed iso..

You want me to try to install the guest additions? (I have to do it through the terminal as the graphical interface isn't working).
Top
Perryg
Site Moderator
Posts: 34369
Joined: 6. Sep 2008, 22:55
Primary OS: Linux other
VBox Version: OSE self-compiled
Guest OSses: *NIX

Re: Ubuntu 13.04 not starting after upgrading from 12.10

Post by Perryg »

Probably not going to help. If the GAs are not installed Ubuntu should actually use the gallium drivers to force software 3D. But being as the screen is black you probably don't even have the xorg-server working. At this point is is not going to be a VirtualBox issue but a botched upgrade and you might want to ask the Ubuntu folks what to do. I assume you don't have a backup you could use or take a snapshot before you upgraded.
Top
SuperDre
Posts: 11
Joined: 10. May 2013, 17:24

Re: Ubuntu 13.04 not starting after upgrading from 12.10

Post by SuperDre »

Perryg wrote:Probably not going to help. If the GAs are not installed Ubuntu should actually use the gallium drivers to force software 3D. But being as the screen is black you probably don't even have the xorg-server working. At this point is is not going to be a VirtualBox issue but a botched upgrade and you might want to ask the Ubuntu folks what to do. I assume you don't have a backup you could use or take a snapshot before you upgraded.
Nope, I'll remember that next time.. Thanx for trying to help.. If I can find a solution I'll post it here just for the information...
Top
Perryg
Site Moderator
Posts: 34369
Joined: 6. Sep 2008, 22:55
Primary OS: Linux other
VBox Version: OSE self-compiled
Guest OSses: *NIX

Re: Ubuntu 13.04 not starting after upgrading from 12.10

Post by Perryg »

FYI,

I decided to test an in place upgrade from 12.10 to 13.04 and sure enough it torked out and eliminated all of the xorg packages.
Boot to recovery, then select network to enable the network. then select dpkg to repair the build. Select it again to be sure everything was fixed.

Once you have that click resume and you should be back at the DT. Reinstall the GAs too.
Top
SuperDre
Posts: 11
Joined: 10. May 2013, 17:24

Re: Ubuntu 13.04 not starting after upgrading from 12.10

Post by SuperDre »

haha cool,
This afternoon I tried the fix from this one as my host has a nvidia card:
http://falkvinge.net/2013/02/15/how-to- ... 0-quantal/

Now It starts with a the login and it does work, I see the default background after I logged in, but, I have no sidebar or topbar.. RIght mouse click does give me a popupmenu with the usual stuff (new folder/new document/ new terminal/ etc)..
Should I still try the recovery, and try the dpkg for getting the side/topbar back? or is there something else I should try?
Top
Perryg
Site Moderator
Posts: 34369
Joined: 6. Sep 2008, 22:55
Primary OS: Linux other
VBox Version: OSE self-compiled
Guest OSses: *NIX

Re: Ubuntu 13.04 not starting after upgrading from 12.10

Post by Perryg »

No that's a different problem.

Disable the 3D acceleration in the guest settings and see if the launcher and top panel return.
Then install the new guest additions and see if you can turn it on and it still works.
Top
SuperDre
Posts: 11
Joined: 10. May 2013, 17:24

Re: Ubuntu 13.04 not starting after upgrading from 12.10

Post by SuperDre »

sadly it didn't work, the guest additions are installed properly now (now I have a real full screen etc, so I'm not stuck to the 800x600 screen I had)..
tomorrow I'm gonna try some other stuff I found on the ubuntu forums, but I have not idea if it helps..
if you have any suggestions left I'm willing to try them..

again, thanx for trying to help..
Top
Perryg
Site Moderator
Posts: 34369
Joined: 6. Sep 2008, 22:55
Primary OS: Linux other
VBox Version: OSE self-compiled
Guest OSses: *NIX

Re: Ubuntu 13.04 not starting after upgrading from 12.10

Post by Perryg »

I know you don't want to here this but it works for me. If you are having issues then there must be something missing.
dkms build-essential linux-headers-generic are what the OS requires to build the modules. Post the /var/log/vboxadd-install.log and /var/log/xorg.0.log
Top
SuperDre
Posts: 11
Joined: 10. May 2013, 17:24

Re: Ubuntu 13.04 not starting after upgrading from 12.10

Post by SuperDre »

Yeah, I understand that it works for you, gathering from more posts it should be a solution..
But I won't give up, hehe...

vboxadd-install.log

Code: Select all

Uninstalling modules from DKMS
Attempting to install using DKMS

Creating symlink /var/lib/dkms/vboxguest/4.2.13/source ->
                 /usr/src/vboxguest-4.2.13

DKMS: add completed.

Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area.....
make KERNELRELEASE=3.8.0-19-generic -C /lib/modules/3.8.0-19-generic/build M=/var/lib/dkms/vboxguest/4.2.13/build.......................................................
cleaning build area.....

DKMS: build completed.

vboxguest:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/3.8.0-19-generic/updates/dkms/

vboxsf.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/3.8.0-19-generic/updates/dkms/

vboxvideo.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/3.8.0-19-generic/updates/dkms/

depmod..........

DKMS: install completed.
Creating user for the Guest Additions.
Creating udev rule for the Guest Additions kernel module.
Weird part from the next thing, is the fact it tries to load (or does have) the nvidia driver, even though I used the following (which also did something):

Code: Select all

sudo apt-get remove nvidia-current-updates
sudo shutdown -r now
the Xorg.0.log is from after the reboot..

Xorg.0.log

Code: Select all

[   152.566] 
X.Org X Server 1.13.3
Release Date: 2013-03-07
[   152.567] X Protocol Version 11, Revision 0
[   152.567] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu
[   152.567] Current Operating System: Linux Ubuntu-PSL1GHTv2 3.8.0-19-generic #30-Ubuntu SMP Wed May 1 16:36:13 UTC 2013 i686
[   152.567] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=9bef19bf-5e0b-48ed-ae45-f1aa7aad3840 ro quiet splash vt.handoff=7
[   152.577] Build Date: 17 April 2013  10:42:56PM
[   152.577] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support) 
[   152.577] Current version of pixman: 0.28.2
[   152.577] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   152.577] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   152.579] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 15 20:22:56 2013
[   152.611] (==) Using config file: "/etc/X11/xorg.conf"
[   152.629] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   152.655] (==) ServerLayout "Layout0"
[   152.655] (**) |-->Screen "Screen0" (0)
[   152.655] (**) |   |-->Monitor "Monitor0"
[   152.673] (**) |   |-->Device "Device0"
[   152.673] (**) |-->Input Device "Keyboard0"
[   152.673] (**) |-->Input Device "Mouse0"
[   152.673] (==) Automatically adding devices
[   152.673] (==) Automatically enabling devices
[   152.674] (==) Automatically adding GPU devices
[   152.675] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   152.675] 	Entry deleted from font path.
[   152.675] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   152.675] 	Entry deleted from font path.
[   152.675] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   152.675] 	Entry deleted from font path.
[   152.675] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   152.675] 	Entry deleted from font path.
[   152.675] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   152.675] 	Entry deleted from font path.
[   152.693] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
[   152.693] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[   152.693] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   152.693] (WW) Disabling Keyboard0
[   152.693] (WW) Disabling Mouse0
[   152.693] (II) Loader magic: 0xb77bd6a0
[   152.693] (II) Module ABI versions:
[   152.693] 	X.Org ANSI C Emulation: 0.4
[   152.693] 	X.Org Video Driver: 13.1
[   152.693] 	X.Org XInput driver : 18.0
[   152.693] 	X.Org Server Extension : 7.0
[   152.870] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/134217728
[   152.893] (II) Open ACPI successful (/var/run/acpid.socket)
[   152.894] Initializing built-in extension Generic Event Extension
[   152.894] Initializing built-in extension SHAPE
[   152.894] Initializing built-in extension MIT-SHM
[   152.894] Initializing built-in extension XInputExtension
[   152.895] Initializing built-in extension XTEST
[   152.895] Initializing built-in extension BIG-REQUESTS
[   152.895] Initializing built-in extension SYNC
[   152.895] Initializing built-in extension XKEYBOARD
[   152.895] Initializing built-in extension XC-MISC
[   152.896] Initializing built-in extension SECURITY
[   152.922] Initializing built-in extension XINERAMA
[   152.922] Initializing built-in extension XFIXES
[   152.922] Initializing built-in extension RENDER
[   152.922] Initializing built-in extension RANDR
[   152.922] Initializing built-in extension COMPOSITE
[   152.922] Initializing built-in extension DAMAGE
[   152.922] Initializing built-in extension MIT-SCREEN-SAVER
[   152.922] Initializing built-in extension DOUBLE-BUFFER
[   152.922] Initializing built-in extension RECORD
[   152.923] Initializing built-in extension DPMS
[   152.923] Initializing built-in extension X-Resource
[   152.923] Initializing built-in extension XVideo
[   152.923] Initializing built-in extension XVideo-MotionCompensation
[   152.925] Initializing built-in extension SELinux
[   152.950] Initializing built-in extension XFree86-VidModeExtension
[   152.950] Initializing built-in extension XFree86-DGA
[   152.950] Initializing built-in extension XFree86-DRI
[   152.950] Initializing built-in extension DRI2
[   152.950] (II) LoadModule: "glx"
[   152.979] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/libglx.so
[   156.817] (II) Module glx: vendor="NVIDIA Corporation"
[   156.817] 	compiled for 4.0.2, module version = 1.0.0
[   156.817] 	Module class: X.Org Server Extension
[   156.818] (II) NVIDIA GLX Module  304.88  Wed Mar 27 14:51:59 PDT 2013
[   156.818] Loading extension GLX
[   156.818] (II) LoadModule: "nvidia"
[   156.819] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so
[   156.840] (II) Module nvidia: vendor="NVIDIA Corporation"
[   156.840] 	compiled for 4.0.2, module version = 1.0.0
[   156.840] 	Module class: X.Org Video Driver
[   157.763] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[   157.763] (EE) NVIDIA:     system's kernel log for additional error messages.
[   157.765] (II) UnloadModule: "nvidia"
[   157.769] (II) Unloading nvidia
[   157.771] (EE) Failed to load module "nvidia" (module-specific error, 0)
[   157.771] (==) Matched vboxvideo as autoconfigured driver 0
[   157.771] (==) Matched vesa as autoconfigured driver 1
[   157.771] (==) Matched modesetting as autoconfigured driver 2
[   157.771] (==) Matched fbdev as autoconfigured driver 3
[   157.776] (==) Assigned the driver to the xf86ConfigLayout
[   157.776] (II) LoadModule: "vboxvideo"
[   157.856] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so
[   157.882] (II) Module vboxvideo: vendor="Oracle Corporation"
[   157.882] 	compiled for 10.13.0, module version = 1.0.1
[   157.882] 	Module class: X.Org Video Driver
[   157.882] 	ABI class: X.Org Video Driver, version 13.0
[   157.882] (**) Load address of symbol "VBOXVIDEO" is 0xb4d9d160
[   157.883] (II) LoadModule: "vesa"
[   157.915] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   157.924] (II) Module vesa: vendor="X.Org Foundation"
[   157.925] 	compiled for 1.12.99.902, module version = 2.3.2
[   157.925] 	Module class: X.Org Video Driver
[   157.925] 	ABI class: X.Org Video Driver, version 13.0
[   157.925] (II) LoadModule: "modesetting"
[   157.935] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   157.945] (II) Module modesetting: vendor="X.Org Foundation"
[   157.945] 	compiled for 1.13.3, module version = 0.7.0
[   157.945] 	Module class: X.Org Video Driver
[   157.946] 	ABI class: X.Org Video Driver, version 13.1
[   157.946] (II) LoadModule: "fbdev"
[   157.971] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   157.981] (II) Module fbdev: vendor="X.Org Foundation"
[   157.981] 	compiled for 1.12.99.902, module version = 0.4.3
[   157.981] 	Module class: X.Org Video Driver
[   157.981] 	ABI class: X.Org Video Driver, version 13.0
[   157.981] (II) VBoxVideo: guest driver for VirtualBox: vbox
[   157.981] (II) VESA: driver for VESA chipsets: vesa
[   157.981] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   157.981] (II) FBDEV: driver for framebuffer: fbdev
[   157.982] (++) using VT number 7

[   158.033] (WW) Falling back to old probe method for vesa
[   158.033] (WW) Falling back to old probe method for modesetting
[   158.034] (EE) open /dev/dri/card0: No such file or directory
[   158.034] (WW) Falling back to old probe method for fbdev
[   158.034] (II) Loading sub module "fbdevhw"
[   158.034] (II) LoadModule: "fbdevhw"
[   158.047] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   158.067] (II) Module fbdevhw: vendor="X.Org Foundation"
[   158.067] 	compiled for 1.13.3, module version = 0.0.2
[   158.067] 	ABI class: X.Org Video Driver, version 13.1
[   158.082] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.2.13
[   158.103] (II) Loading sub module "ramdac"
[   158.103] (II) LoadModule: "ramdac"
[   158.103] (II) Module "ramdac" already built-in
[   158.104] (II) Loading sub module "fb"
[   158.104] (II) LoadModule: "fb"
[   158.107] (II) Loading /usr/lib/xorg/modules/libfb.so
[   158.116] (II) Module fb: vendor="X.Org Foundation"
[   158.116] 	compiled for 1.13.3, module version = 1.0.0
[   158.117] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   158.117] (II) Loading sub module "shadowfb"
[   158.117] (II) LoadModule: "shadowfb"
[   158.119] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[   158.204] (II) Module shadowfb: vendor="X.Org Foundation"
[   158.205] 	compiled for 1.13.3, module version = 1.0.0
[   158.205] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   158.205] (II) Loading sub module "vgahw"
[   158.205] (II) LoadModule: "vgahw"
[   158.215] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   158.234] (II) Module vgahw: vendor="X.Org Foundation"
[   158.235] 	compiled for 1.13.3, module version = 0.1.0
[   158.235] 	ABI class: X.Org Video Driver, version 13.1
[   158.235] (II) Loading sub module "dri"
[   158.235] (II) LoadModule: "dri"
[   158.235] (II) Module "dri" already built-in
[   158.282] (**) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[   158.283] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[   158.283] (**) VBoxVideo(0):  Built-in mode "VBoxInitialMode": 94.8 MHz (scaled from 0.0 MHz), 56.8 kHz, 60.0 Hz
[   158.283] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0   94.79  1664 1666 1668 1670  940 942 944 946 (56.8 kHz b)
[   158.283] (**) VBoxVideo(0):  Built-in mode "VBoxDynamicMode": 94.8 MHz (scaled from 0.0 MHz), 56.8 kHz, 60.0 Hz
[   158.283] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0   94.79  1664 1666 1668 1670  940 942 944 946 (56.8 kHz b)
[   158.283] (**) VBoxVideo(0):  Built-in mode "VBoxDynamicMode": 94.8 MHz (scaled from 0.0 MHz), 56.8 kHz, 60.0 Hz
[   158.283] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0   94.79  1664 1666 1668 1670  940 942 944 946 (56.8 kHz b)
[   158.283] (**) VBoxVideo(0):  Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[   158.283] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[   158.283] (**) VBoxVideo(0):  Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[   158.283] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[   158.283] (**) VBoxVideo(0):  Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[   158.283] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[   158.313] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[   158.313] (==) VBoxVideo(0): RGB weight 888
[   158.313] (==) VBoxVideo(0): Default visual is TrueColor
[   158.314] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[   158.314] (==) VBoxVideo(0): DPI set to (96, 96)
[   158.314] (II) UnloadModule: "vesa"
[   158.314] (II) Unloading vesa
[   158.315] (II) UnloadModule: "modesetting"
[   158.315] (II) Unloading modesetting
[   158.315] (II) UnloadModule: "fbdev"
[   158.315] (II) Unloading fbdev
[   158.323] (II) UnloadSubModule: "fbdevhw"
[   158.323] (II) Unloading fbdevhw
[   158.323] (--) Depth 24 pixmap format is 32 bpp
[   158.398] (EE) VBoxVideo(0): Disabling DRI due to missing server functionality.
[   158.398] (II) VBoxVideo(0): visual configurations initialized
[   158.400] (II) VBoxVideo(0): Requested monitor count: 1
[   158.401] (II) VBoxVideo(0): Output VBOX0 using monitor section Monitor0
[   158.401] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[   158.411] (II) VBoxVideo(0): EDID for output VBOX0
[   158.411] (II) VBoxVideo(0): Manufacturer: VBX  Model: 0  Serial#: 61605504
[   158.412] (II) VBoxVideo(0): Year: 1990  Week: 1
[   158.412] (II) VBoxVideo(0): EDID Version: 1.3
[   158.412] (II) VBoxVideo(0): Digital Display Input
[   158.412] (II) VBoxVideo(0): Indeterminate output size
[   158.412] (II) VBoxVideo(0): Gamma: 2.20
[   158.412] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[   158.412] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   158.412] (II) VBoxVideo(0): Default color space is primary color space
[   158.412] (II) VBoxVideo(0): First detailed timing is preferred mode
[   158.413] (II) VBoxVideo(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[   158.413] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[   158.413] (II) VBoxVideo(0): Manufacturer's mask: 0
[   158.413] (II) VBoxVideo(0): Supported detailed timing:
[   158.413] (II) VBoxVideo(0): clock: 94.8 MHz   Image Size:  0 x 0 mm
[   158.413] (II) VBoxVideo(0): h_active: 1664  h_sync: 1666  h_sync_end 1668 h_blank_end 1670 h_border: 0
[   158.413] (II) VBoxVideo(0): v_active: 940  v_sync: 942  v_sync_end 944 v_blanking: 946 v_border: 0
[   158.413] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[   158.413] (II) VBoxVideo(0): Monitor name: VBOX monitor
[   158.413] (II) VBoxVideo(0): EDID (in hex):
[   158.413] (II) VBoxVideo(0): 	00ffffffffffff00585800008006ac03
[   158.413] (II) VBoxVideo(0): 	0100010380000078eeee91a3544c9926
[   158.413] (II) VBoxVideo(0): 	0f505400000001010101010101010101
[   158.413] (II) VBoxVideo(0): 	0101010101010625800660ac06300202
[   158.413] (II) VBoxVideo(0): 	2200000000000000000000fd0000c800
[   158.414] (II) VBoxVideo(0): 	c864000a202020202020000000fc0056
[   158.414] (II) VBoxVideo(0): 	424f58206d6f6e69746f720a00000010
[   158.414] (II) VBoxVideo(0): 	000a2020202020202020202020200017
[   158.414] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[   158.414] (II) VBoxVideo(0): Modeline "1664x940"x60.0   94.79  1664 1666 1668 1670  940 942 944 946 (56.8 kHz Pb)
[   158.414] (II) VBoxVideo(0): Modeline "1024x768"x60.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[   158.414] (II) VBoxVideo(0): Modeline "800x600"x60.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[   158.414] (II) VBoxVideo(0): Modeline "640x480"x60.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[   158.414] (II) VBoxVideo(0): Output VBOX0 connected
[   158.415] (II) VBoxVideo(0): Using exact sizes for initial modes
[   158.415] (II) VBoxVideo(0): Output VBOX0 using initial mode 1664x940
[   158.415] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   158.415] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   158.442] (==) VBoxVideo(0): DPMS enabled
[   158.442] (--) RandR disabled
[   158.565] (II) SELinux: Disabled on system
[   158.600] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[   158.600] (II) VBoxVideo(0): Setting screen physical size to 440 x 248
[   158.954] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[   159.133] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   159.134] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   159.134] (II) LoadModule: "evdev"
[   159.143] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   159.181] (II) Module evdev: vendor="X.Org Foundation"
[   159.181] 	compiled for 1.13.3, module version = 2.7.3
[   159.181] 	Module class: X.Org XInput Driver
[   159.181] 	ABI class: X.Org XInput driver, version 18.0
[   159.181] (II) Using input driver 'evdev' for 'Power Button'
[   159.181] (**) Power Button: always reports core events
[   159.181] (**) evdev: Power Button: Device: "/dev/input/event0"
[   159.181] (--) evdev: Power Button: Vendor 0 Product 0x1
[   159.182] (--) evdev: Power Button: Found keys
[   159.182] (II) evdev: Power Button: Configuring as keyboard
[   159.182] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
[   159.182] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   159.182] (**) Option "xkb_rules" "evdev"
[   159.182] (**) Option "xkb_model" "pc105"
[   159.182] (**) Option "xkb_layout" "us"
[   159.182] (**) Option "xkb_variant" "intl"
[   159.204] (II) XKB: reuse xkmfile /var/lib/xkb/server-A5431D4A34463C892C9E905E2E421B30A3CC30DD.xkm
[   159.233] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   159.233] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   159.234] (II) Using input driver 'evdev' for 'Sleep Button'
[   159.234] (**) Sleep Button: always reports core events
[   159.234] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[   159.234] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   159.234] (--) evdev: Sleep Button: Found keys
[   159.234] (II) evdev: Sleep Button: Configuring as keyboard
[   159.234] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1/event1"
[   159.234] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[   159.234] (**) Option "xkb_rules" "evdev"
[   159.234] (**) Option "xkb_model" "pc105"
[   159.234] (**) Option "xkb_layout" "us"
[   159.234] (**) Option "xkb_variant" "intl"
[   159.251] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event4)
[   159.251] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[   159.251] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[   159.251] (**) VirtualBox mouse integration: always reports core events
[   159.251] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event4"
[   159.259] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe
[   159.259] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons
[   159.259] (--) evdev: VirtualBox mouse integration: Found absolute axes
[   159.259] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes
[   159.259] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen
[   159.259] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen
[   159.259] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[   159.259] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   159.259] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input4/event4"
[   159.259] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 8)
[   159.260] (II) evdev: VirtualBox mouse integration: initialized for absolute axes.
[   159.262] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[   159.262] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[   159.262] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[   159.262] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[   159.275] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js1)
[   159.275] (II) No input driver specified, ignoring this device.
[   159.275] (II) This device may have been added with another device file.
[   159.294] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event3)
[   159.294] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[   159.294] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[   159.294] (**) VirtualBox USB Tablet: always reports core events
[   159.294] (**) evdev: VirtualBox USB Tablet: Device: "/dev/input/event3"
[   159.306] (--) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21
[   159.306] (--) evdev: VirtualBox USB Tablet: Found 9 mouse buttons
[   159.306] (--) evdev: VirtualBox USB Tablet: Found scroll wheel(s)
[   159.306] (--) evdev: VirtualBox USB Tablet: Found relative axes
[   159.306] (--) evdev: VirtualBox USB Tablet: Found absolute axes
[   159.306] (--) evdev: VirtualBox USB Tablet: Found x and y absolute axes
[   159.306] (--) evdev: VirtualBox USB Tablet: Found absolute touchscreen
[   159.306] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen
[   159.307] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support
[   159.307] (**) evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[   159.307] (**) evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   159.307] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input3/event3"
[   159.307] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 9)
[   159.307] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes.
[   159.307] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes.
[   159.315] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[   159.315] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[   159.315] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[   159.315] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[   159.349] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[   159.349] (II) No input driver specified, ignoring this device.
[   159.349] (II) This device may have been added with another device file.
[   159.367] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)
[   159.367] (II) No input driver specified, ignoring this device.
[   159.367] (II) This device may have been added with another device file.
[   159.398] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[   159.398] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   159.398] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   159.398] (**) AT Translated Set 2 keyboard: always reports core events
[   159.398] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[   159.399] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   159.399] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   159.399] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   159.399] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[   159.399] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[   159.399] (**) Option "xkb_rules" "evdev"
[   159.399] (**) Option "xkb_model" "pc105"
[   159.399] (**) Option "xkb_layout" "us"
[   159.399] (**) Option "xkb_variant" "intl"
[   159.449] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event5)
[   159.450] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[   159.450] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[   159.450] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[   159.450] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event5"
[   159.451] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[   159.451] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[   159.451] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[   159.451] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[   159.473] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[   159.474] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[   159.474] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[   159.474] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[   159.474] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   159.474] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[   159.474] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 11)
[   159.475] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[   159.478] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[   159.478] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[   159.479] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[   159.479] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[   159.498] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse1)
[   159.498] (II) No input driver specified, ignoring this device.
[   159.498] (II) This device may have been added with another device file.
[   178.551] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   178.551] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1664x940 Warning: We only handle separate sync.
[   178.551] (II) VBoxVideo(0): Using hsync ranges from config file
[   178.551] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   178.552] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   178.552] (II) VBoxVideo(0): Modeline "1664x940"x0.0   94.78  1664 1666 1668 1670  940 942 944 946 -hsync -vsync (56.8 kHz eP)
[   207.051] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   207.051] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1664x940 Warning: We only handle separate sync.
[   207.051] (II) VBoxVideo(0): Using hsync ranges from config file
[   207.051] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   207.051] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   207.051] (II) VBoxVideo(0): Modeline "1664x940"x0.0   94.78  1664 1666 1668 1670  940 942 944 946 -hsync -vsync (56.8 kHz eP)
[   245.443] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[   245.511] (II) config/udev: Adding drm device (/dev/dri/card0)
[   245.511] (II) LoadModule: "modesetting"
[   245.543] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   245.550] (II) Module modesetting: vendor="X.Org Foundation"
[   245.550] 	compiled for 1.13.3, module version = 0.7.0
[   245.550] 	Module class: X.Org Video Driver
[   245.550] 	ABI class: X.Org Video Driver, version 13.1
[   245.578] (II) modesetting(G0): using drv /dev/dri/card0
[   245.585] (**) modesetting(G0): Depth 24, (--) framebuffer bpp 32
[   245.586] (==) modesetting(G0): RGB weight 888
[   245.586] (==) modesetting(G0): Default visual is TrueColor
[   245.586] (II) modesetting(G0): ShadowFB: preferred NO, enabled NO
[   245.586] (EE) modesetting(G0): KMS doesn't support dumb interface
[   245.586] (EE) modesetting(G0): KMS setup failed
[   245.587] hotplugged device 0 didn't configure
[   245.587] (II) UnloadModule: "modesetting"
[   245.587] xf86: found device 0
[   378.422] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   378.423] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1664x940 Warning: We only handle separate sync.
[   378.423] (II) VBoxVideo(0): Using hsync ranges from config file
[   378.423] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   378.423] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   378.423] (II) VBoxVideo(0): Modeline "1664x940"x0.0   94.78  1664 1666 1668 1670  940 942 944 946 -hsync -vsync (56.8 kHz eP)
[   392.325] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   392.325] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1664x940 Warning: We only handle separate sync.
[   392.325] (II) VBoxVideo(0): Using hsync ranges from config file
[   392.325] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   392.325] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   392.325] (II) VBoxVideo(0): Modeline "1664x940"x0.0   94.78  1664 1666 1668 1670  940 942 944 946 -hsync -vsync (56.8 kHz eP)
[   404.098] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   404.098] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1664x940 Warning: We only handle separate sync.
[   404.098] (II) VBoxVideo(0): Using hsync ranges from config file
[   404.098] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   404.098] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   404.099] (II) VBoxVideo(0): Modeline "1664x940"x0.0   94.78  1664 1666 1668 1670  940 942 944 946 -hsync -vsync (56.8 kHz eP)
[   434.598] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   434.598] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1664x940 Warning: We only handle separate sync.
[   434.598] (II) VBoxVideo(0): Using hsync ranges from config file
[   434.598] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   434.598] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   434.598] (II) VBoxVideo(0): Modeline "1664x940"x0.0   94.78  1664 1666 1668 1670  940 942 944 946 -hsync -vsync (56.8 kHz eP)
[   701.696] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   701.702] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1664x940 Warning: We only handle separate sync.
[   701.702] (II) VBoxVideo(0): Using hsync ranges from config file
[   701.702] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   701.702] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   701.702] (II) VBoxVideo(0): Modeline "1664x940"x0.0   94.78  1664 1666 1668 1670  940 942 944 946 -hsync -vsync (56.8 kHz eP)
Top
Perryg
Site Moderator
Posts: 34369
Joined: 6. Sep 2008, 22:55
Primary OS: Linux other
VBox Version: OSE self-compiled
Guest OSses: *NIX

Re: Ubuntu 13.04 not starting after upgrading from 12.10

Post by Perryg »

Code: Select all

/var/lib/dkms/vboxguest/4.2.13/source ->
                 /usr/src/vboxguest-4.2.13
Can you explain the 4.2.13 GAs? 4.2.12 is the latest official build.
Top
SuperDre
Posts: 11
Joined: 10. May 2013, 17:24

Re: Ubuntu 13.04 not starting after upgrading from 12.10

Post by SuperDre »

Perryg wrote:

Code: Select all

/var/lib/dkms/vboxguest/4.2.13/source ->
                 /usr/src/vboxguest-4.2.13
Can you explain the 4.2.13 GAs? 4.2.12 is the latest official build.
the 4.2.12 GA's is what started the whole mess when I still was on 12.04, it has a bug and was later replaced with 4.2.13 through the forum. then I tried upgrading to 12.10 (before I knew what the problem was) to fix the fubar, but it didn't help, then I read on this forum the 4.2.12 GA had a problem, I removed it and 12.10 was starting again, but the first question I got was for upgrading to 13.04 so as the angel boy I am, I let it upgrade..
Top
Post Reply

Return to “Linux Guests”