Win7 Host Blue Screen when my winxp guest shutdown or sleep

[heface]

My computer is IBM T61 . I have 4.1.8 version of virtual box installed.
yesterday i change my computer ram from 4g to 8g , then after i shut down my guest winxp , my host blue screen of death.
if i don't start virtual machine, my host work fine.
if i start virtual machine , not shutdown or sleep , my guest and host work fine.
who can help me ? or I need reinstall my virtual box ? latest version virtualbox ?

[noteirak]

Please see Minimum information needed for assistance.

[heface]

I have try to use vbox version 4.2.6, but the problem still.

C:\Program Files\Oracle\VirtualBox>VBoxManage showvminfo siebelDEV --details
Name: siebelDEV
Groups: /
Guest OS: Windows XP
UUID: 0d3b5257-fa02-48cf-ab40-18cf8ff07cfe
Config file: E:\vm\siebelDEV\siebelDEV.vbox
Snapshot folder: E:\vm\siebelDEV\Snapshots
Log folder: E:\vm\siebelDEV\Logs
Hardware UUID: 0d3b5257-fa02-48cf-ab40-18cf8ff07cfe
Memory size: 3072MB
Page Fusion: off
VRAM size: 16MB
CPU exec cap: 100%
HPET: off
Chipset: piix3
Firmware: BIOS
Number of CPUs: 1
Synthetic Cpu: off
CPUID overrides: None
Boot menu mode: message and menu
Boot Device (1): Floppy
Boot Device (2): DVD
Boot Device (3): HardDisk
Boot Device (4): Not Assigned
ACPI: on
IOAPIC: off
PAE: off
Time offset: 0ms
RTC: local time
Hardw. virt.ext: on
Hardw. virt.ext exclusive: off
Nested Paging: on
Large Pages: on
VT-x VPID: on
State: running (since 2013-01-07T00:05:19.498000000)
Monitor count: 1
3D Acceleration: off
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: off
Allow Tracing to Access VM: off
Tracing Configuration:
Autostart Enabled: off
Autostart Delay: 0
Storage Controller Name (0): IDE 控制器
Storage Controller Type (0): PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 2
Storage Controller Port Count (0): 2
Storage Controller Bootable (0): on
IDE 控制器 (0, 0): E:\vhd\siebelDEV.vdi (UUID: a7984df7-fe21-4c32-a74e-80c194eac
b83)
IDE 控制器 (1, 0): Empty
NIC 1: MAC: 080027F7149C, Attachment: Bridged Interface 'Intel(R) 8256
6MM Gigabit Network Connection', Cable connected: on, Trace: off (file: none), T
ype: Am79C973, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, B
andwidth group: none
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: USB Tablet
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
LPT 1: disabled
LPT 2: disabled
Audio: enabled (Driver: DSOUND, Controller: AC97)
Clipboard Mode: Bidirectional
Drag'n'drop Mode: disabled
Video mode: 1400x1050x32
VRDE: disabled
USB: enabled
EHCI: disabled

USB Device Filters:

<none>

Available remote USB devices:

<none>

Currently Attached USB Devices:

<none>

Bandwidth groups: <none>

Shared folders:

Name: 'D_DRIVE', Host path: 'D:\' (machine mapping), writable
Name: 'F_DRIVE', Host path: 'F:\' (machine mapping), readonly

VRDE Connection: not active
Clients so far: 0

Guest:

Configured memory balloon size: 0 MB
OS type: WindowsXP
Additions run level: 3
Additions version: 4.1.12 r77245


Guest Facilities:

Facility "VirtualBox Base Driver": active/running (last update: 2013/01/07 00:05
:28 UTC)
Facility "VirtualBox System Service": active/running (last update: 2013/01/07 00
:06:32 UTC)
Facility "VirtualBox Desktop Integration": active/running (last update: 2013/01/
07 00:10:03 UTC)
Facility "Seamless Mode": active/running (last update: 2013/01/07 00:05:28 UTC)
Facility "Graphics Mode": active/running (last update: 2013/01/07 00:05:28 UTC)

[heface]

BTW:
In win7 Memory.dmp file , has the following information:
Probably caused by : VBoxDrv.sys ( VBoxDrv!RTAssertMsg2+124 )

Followup: MachineOwner


In win7 minidmp file , has the followinginformation:
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17944.amd64fre.win7sp1_gdr.120830-0333
Machine Name:
Kernel base = 0xfffff800`04657000 PsLoadedModuleList = 0xfffff800`0489b670
Debug session time: Fri Jan 4 17:31:17.732 2013 (GMT+8)
System Uptime: 0 days 9:23:12.990


BugCheck A, {ffffffffffffffff, 2, 1, fffff800047069b2}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.



Probably caused by : nvlddmkm.sys ( nvlddmkm+8eece )

Followup: MachineOwner

[mpack]

I see you are assigning 3GB RAM to the guest, which is rather a lot for a 32bit VM. I suggest that you try reducing that to 1GB, or 2GB at most.

[heface]

I have changed ram of guest to 2g, problem still.

[noteirak]

Check if you have the latest Video drivers for your graphic card, and install the newest if not. Then see if there is any improvement.