virtualbox.org

Hi Please help me by providing me step by step instructions on how I can get my virtual box running pepermint on my lan.

My goal is to use my virtualbox peppermint OS as a webserver, but it need internet access thru my default gateway (linksys router) and to have an IP of 192.168.50.*** so that I can port forward port 80, 3306, etc on my linksys router so traffic coming from the web will be able to view my website being hosted on my peppermint OS virtual box....i'm really just guessing on how to do this with no success....Can someone please provide me with step by step instructions on how to do this task??? I can provide what ever other info is necessary. I am a Junior Linux Admin, and I am ripping my hair out trying to get this done

also from my windows host I can ping Eth2 192.168.56.103
and from my peppermint OS guest virtual box I can ping 192.168.50.3

Any Help would be greatly appreciated!
Thank You!!!

out put of ipconfig/all on my Windows host is:

Code: Select all

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

C:\Users\Administrator>ipconfig/all

Windows IP Configuration

   Host Name . . . . . . . . . . . . : WIN-2W6NDAIZBIA
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Realtek RTL8102E Family PCI-E Fast Ethern
et NIC (NDIS 6.0)
   Physical Address. . . . . . . . . : 00-1E-33-AC-51-D2
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::6d42:f6ae:6896:3568%10(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.50.3(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Friday, October 12, 2012 5:21:40 AM
   Lease Expires . . . . . . . . . . : Saturday, October 13, 2012 5:21:43 AM
   Default Gateway . . . . . . . . . : 192.168.50.1
   DHCP Server . . . . . . . . . . . : 192.168.50.1
   DHCPv6 IAID . . . . . . . . . . . : 167779891
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-9D-2E-2F-00-1E-33-AC-51-D2

   DNS Servers . . . . . . . . . . . : 192.168.50.1
   NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter VirtualBox Host-Only Network:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter
   Physical Address. . . . . . . . . : 08-00-27-00-B8-5F
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::100d:cd4b:9090:198b%12(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.56.102(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Friday, October 12, 2012 5:25:13 AM
   Lease Expires . . . . . . . . . . : Friday, October 12, 2012 6:25:16 AM
   Default Gateway . . . . . . . . . :
   DHCP Server . . . . . . . . . . . : 192.168.56.100
   DHCPv6 IAID . . . . . . . . . . . : 252182567
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-9D-2E-2F-00-1E-33-AC-51-D2

   DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                       fec0:0:0:ffff::2%1
                                       fec0:0:0:ffff::3%1
   NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 8:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 9:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 02-00-54-55-4E-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 12:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

C:\Users\Administrator>

out put of ifconfig on my peppermint OS vb guest is below

Code: Select all

eth0      Link encap:Ethernet  HWaddr 08:00:27:d8:b9:89  
          inet addr:10.0.2.15  Bcast:10.0.2.255  Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:fed8:b989/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:312 errors:0 dropped:0 overruns:0 frame:0
          TX packets:324 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:41032 (41.0 KB)  TX bytes:27408 (27.4 KB)

eth1      Link encap:Ethernet  HWaddr 08:00:27:30:5e:82  
          inet6 addr: fe80::a00:27ff:fe30:5e82/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:143 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:26646 (26.6 KB)
          Interrupt:9 Base address:0xd240 

eth2      Link encap:Ethernet  HWaddr 08:00:27:04:a5:18  
          inet addr:192.168.56.103  Bcast:192.168.56.255  Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:fe04:a518/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:22 errors:0 dropped:0 overruns:0 frame:0
          TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:4171 (4.1 KB)  TX bytes:1242 (1.2 KB)
          Interrupt:5 Base address:0xd260 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:120 errors:0 dropped:0 overruns:0 frame:0
          TX packets:120 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:10408 (10.4 KB)  TX bytes:10408 (10.4 KB)

I would switch to Bridged in the guest instead of NAT and Host only.
Then you will be in the same subnet and it will be easy to forward to the guest

do i also need to bridge my lan connection and virtual box connection in the networking and sharing center on my host windows machine?

Y E T I wrote:I would switch to Bridged in the guest instead of NAT and Host only.
Then you will be in the same subnet and it will be easy to forward to the guest

i switched to bridged connection from NAT on the peppermint linux virtual box, and i still have those same IP's after restarting networking services and restarting the machine...its the same 2 IP's i listed on the original post for the virtual box...

Remove anything other than the first adapter, and make sure it is set to Bridged. You may need to delete the guests /etc/udev/rules.d/70-persistent-net.rules and reboot the guest to clear up the previous configs.

Y E T I wrote:Remove anything other than the first adapter, and make sure it is set to Bridged. You may need to delete the guests /etc/udev/rules.d/70-persistent-net.rules and reboot the guest to clear up the previous configs.

ok great thanks, i have a job interview i am about to walk out the door for, but i will try that when i get home and post the results....

if anybody has any other suggestions please let me know in the meantime before i come back

thank you!

virtualbox.org

Need Step By Step Instructions on putting my VB on my LAN

Need Step By Step Instructions on putting my VB on my LAN

Re: Need Step By Step Instructions on putting my VB on my LA

Re: Need Step By Step Instructions on putting my VB on my LA

Re: Need Step By Step Instructions on putting my VB on my LA

Re: Need Step By Step Instructions on putting my VB on my LA

Re: Need Step By Step Instructions on putting my VB on my LA