Page 1 of 2
USB doesn't work
Posted: 27. Nov 2011, 15:35
by BaxterStockman
Hey,
I'm using Virtualbox 4.1.6 and installed the extension pack.
So after that typed "sudo usermod -a -G voxboxusers username" in the terminal. But windows (windows 7) still doesn't see any USB Device
I looked up so many FAQs and stuff but I couldn't find any answer, what am I doing wrong? Can anyone help
Re: USB doesn't work
Posted: 27. Nov 2011, 16:01
by Perryg
Just in case what you typed above is really what you typed.
Code: Select all
sudo usermod -aG vboxusers <your username>
Replace <your username> with the name you use to log in. Type your user password when prompted.
You *MUST* logout and back in to the host after permissions are changed before they take effect.
Re: USB doesn't work
Posted: 27. Nov 2011, 17:11
by BaxterStockman
thx, but of course i typed in my username and not "username"
Re: USB doesn't work
Posted: 27. Nov 2011, 17:13
by BaxterStockman
so what i typed in was "who am i" and it showed me "jack" so i typed in "sudo usermod -a -G voxboxusers jack" and then typed in my pw
Re: USB doesn't work
Posted: 27. Nov 2011, 17:15
by Perryg
voxboxusers
That is what I was really referring to it is
vboxusers and the fact that you must log off and in for permissions to take effect.
Re: USB doesn't work
Posted: 27. Nov 2011, 17:17
by Perryg
type id in a terminal will tell you if you are really in the vboxusers group.
Also VBoxManage list extpacks tells you if the Extension Pack is really installed/installed properly.
Re: USB doesn't work
Posted: 27. Nov 2011, 18:16
by BaxterStockman
so i used that, i typed in vbox instead of voxbox, loged out and on again, still doesn't work,
when i type in id, i get this:
"uid=1000(jack) gid=1000(jack) groups=4(adm),20(dialout),24(cdrom),46(plugdev),105(lpadmin),119(admin),122(sambashare),123(vboxusers),1000(jack)"
does it mean i am in it? I'm sorry I'm a total noobie with linux but i don't want to switch back to windows as the main system.
in settings I can set a filter, do I have to do that? oh and virtualbox manager show that the extension is correctly installed
Re: USB doesn't work
Posted: 27. Nov 2011, 18:37
by Perryg
You shouldn't need any filters. Did you reboot the host or log out and back in?
Re: USB doesn't work
Posted: 27. Nov 2011, 19:03
by BaxterStockman
jap a couple of times
Re: USB doesn't work
Posted: 27. Nov 2011, 19:13
by Perryg
1) Post the results of VBoxManage list usbhost from the hosts terminal
2) Make sure that you have enabled the USB2 section in the guest settings.
3) Post the guests log file (as an attachment)
Re: USB doesn't work
Posted: 27. Nov 2011, 19:52
by BaxterStockman
1)
UUID: 6cd8bc0e-525f-4b9f-ae2b-469988bb6be2
VendorId: 0x046d (046D)
ProductId: 0xc018 (C018)
Revision: 67.1 (6701)
Manufacturer: Logitech
Product: USB Optical Mouse
Address: sysfs:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2//device:/dev/vboxusb/002/003
Current State: Busy
UUID: 0d659ebc-db04-472a-b525-3e6d2f16da1d
VendorId: 0x0489 (0489)
ProductId: 0xe00d (E00D)
Revision: 4.114 (04114)
Manufacturer: Broadcom Corp
Product: Broadcom Bluetooth 2.1 Device
SerialNumber: C44619C0816D
Address: sysfs:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2//device:/dev/vboxusb/001/003
Current State: Busy
UUID: 40f9ea06-decc-462e-965b-9e071301c12f
VendorId: 0x064e (064E)
ProductId: 0xf219 (F219)
Revision: 4.50 (0450)
Manufacturer: SuYin
Product: Lenovo EasyCamera
SerialNumber: CN031B-J311-SE05-VL-R04.03.02
Address: sysfs:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6//device:/dev/vboxusb/001/005
Current State: Busy
UUID: ce6da791-6381-4c80-acc0-6022f8b03ac3
VendorId: 0x0781 (0781)
ProductId: 0x5567 (5567)
Revision: 1.0 (0100)
Manufacturer: SanDisk
Product: Cruzer Blade
SerialNumber: 2004431860052770378C
Address: sysfs:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4//device:/dev/vboxusb/001/006
Current State: Busy
UUID: 9c9f2e06-898e-4a65-8bb1-2ff22a3a5be0
VendorId: 0x1c7a (1C7A)
ProductId: 0x0801 (0801)
Revision: 1.0 (0100)
Manufacturer: Generic
Product: FingerPrinter Reader
SerialNumber: 00000000000006
Address: sysfs:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3//device:/dev/vboxusb/001/004
Current State: Available
Re: USB doesn't work
Posted: 27. Nov 2011, 19:56
by BaxterStockman
2)
Re: USB doesn't work
Posted: 27. Nov 2011, 19:57
by BaxterStockman
2)
Re: USB doesn't work
Posted: 27. Nov 2011, 19:57
by BaxterStockman
3) how do i get the guest log file?
Re: USB doesn't work
Posted: 27. Nov 2011, 20:15
by Perryg
In the main manager click on machine and then show log. Click save and post as an attachment.