virtualbox.org

Hi,

I have always use VB with Lotus Notes and now with the 4.x, i'm not able to launch Lotus Notes with Vb-addons installed. Because all the VM crashes

. Have you a solution

Best regards

Frame your question in a way to make it easy to answer

Thanks you for your answer, there is very constructive !!!

You've been here since may 2010, surely you have read the FAQ by now and surely by now you should know that without proper info we can't help.

I've seen this too and retrograded as a result.

my host is Mandriva 2010.2. x64
guest is windows 7_64

I've seen it with 4.0.12 all the way through 4.1.2
am I doing something silly with my settings?
vminfo

Code: Select all

Name:            Windows_7
Guest OS:        Windows 7 (64 bit)
UUID:            558a94a8-c18c-4482-9710-75750dc36768
Config file:     /home/data/vm/Windows_7/Windows_7.vbox
Snapshot folder: /home/data/vm/Windows_7/Snapshots
Log folder:      /home/data/vm/Windows_7/Logs
Hardware UUID:   558a94a8-c18c-4482-9710-75750dc36768
Memory size:     3050MB
Page Fusion:     off
VRAM size:       128MB
CPU exec cap:    100%
HPET:            off
Chipset:         piix3
Firmware:        BIOS
Number of CPUs:  2
Synthetic Cpu:   off
CPUID overrides: None
Boot menu mode:  message and menu
Boot Device (1): DVD
Boot Device (2): HardDisk
Boot Device (3): Not Assigned
Boot Device (4): Not Assigned
ACPI:            on
IOAPIC:          on
PAE:             off
Time offset:     0 ms
RTC:             local time
Hardw. virt.ext: on
Hardw. virt.ext exclusive: on
Nested Paging:   on
Large Pages:     off
VT-x VPID:       on
State:           powered off (since 2011-09-20T21:29:56.000000000)
Monitor count:   1
3D Acceleration: on
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address: 
Teleporter Password: 
Storage Controller Name (0):            IDE Controller
Storage Controller Type (0):            PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0):  2
Storage Controller Port Count (0):      2
Storage Controller Bootable (0):        on
Storage Controller Name (1):            SATA Controller
Storage Controller Type (1):            IntelAhci
Storage Controller Instance Number (1): 0
Storage Controller Max Port Count (1):  30
Storage Controller Port Count (1):      1
Storage Controller Bootable (1):        on
IDE Controller (1, 0): /usr/share/virtualbox/VBoxGuestAdditions.iso (UUID: 00973f90-270b-4d9e-a2e0-4b2bd47e9894)
SATA Controller (0, 0): /home/data/vm/Windows_7.vdi (UUID: 36c32bb9-d91b-4824-9b66-37c4a7175534)
NIC 1:           MAC: 080027D6B5FF, Attachment: Bridged Interface 'eth0', Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny
NIC 2:           disabled
NIC 3:           disabled
NIC 4:           disabled
NIC 5:           disabled
NIC 6:           disabled
NIC 7:           disabled
NIC 8:           disabled
Pointing Device: PS/2 Mouse
Keyboard Device: PS/2 Keyboard
UART 1:          disabled
UART 2:          disabled
Audio:           enabled (Driver: ALSA, Controller: HDA)
Clipboard Mode:  Bidirectional
VRDE:            disabled
USB:             enabled

USB Device Filters:

<none>

Available remote USB devices:

<none>

Currently Attached USB Devices:

<none>

Shared folders:  <none>

VRDE Connection:    not active
Clients so far:     0

Guest:

Configured memory balloon size:      0 MB
OS type:                             Windows7_64
Additions run level:                 0

Guest Facilities:

No active facilities.

It seems to me to have something to do with the video. because when it freezes, I can go to "machine" menu item.. select "Close"
and then select cancel, and the screen shrinks down to 1024x768 and the screen is black with short horizontal lines (densely populated) of color on a black background. it looks like what I imagine an XP windows boot up screen would look like if it got scrambled.
if it happens again, I'll up load a screen shot.

here's the screen shot I promised.

I think this is my problem as well. Lotus notes is built on java.. and the screen shot is similar..

http://www.virtualbox.org/ticket/9561

is there any more information that I can provide that will help out?
Thanks

ok here is a log file.
between
00:19:01.786 RTC: period=0x200 (512) 64 Hz
and
00:23:37.015 Changing the VM state from 'RUNNING' to 'SUSPENDING'.

I opened the lotus notes same time application
then, I noticed it had frozen..
then I clicked "machine" then "close"
and then this..
00:23:37.015 Changing the VM state from 'RUNNING' to 'SUSPENDING'.
00:23:37.015 AIOMgr: Endpoint for file '/home/data/vm/Windows_7.vdi' (flags 000c0781) created successfully
00:23:37.027 Changing the VM state from 'SUSPENDING' to 'SUSPENDED'.
00:23:37.085 ERROR [COM]: aRC=NS_ERROR_UNEXPECTED (0x8000ffff) aIID={09eed313-cd56-4d06-bd
and then in the close machine dialog, I clicked cancel..
then this..
56-fac0f716b5dd} aComponent={Display} aText={This feature is not available at this time}, preserve=false
00:23:45.990 Changing the VM state from 'SUSPENDED' to 'RESUMING'.
00:23:45.990 AIOMgr: Endpoint for file '/home/data/vm/Windows_7.vdi' (flags 000c0723) created successfully
00:23:45.996 Changing the VM state from 'RESUMING' to 'RUNNING'.
00:23:46.003 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007ffc90000000 w=1024 h=768 bpp=0 cbLine=0x400, flags=0x1
and the screen looked like the picture in the attachment.
I'll attach the whole log as well, and the output of the vminfo command

virtualbox.org

VirtualBox 4.x & Lotus Notes Crash

VirtualBox 4.x & Lotus Notes Crash

Re: VirtualBox 4.x & Lotus Notes Crash

Re: VirtualBox 4.x & Lotus Notes Crash

Re: VirtualBox 4.x & Lotus Notes Crash

Re: VirtualBox 4.x & Lotus Notes Crash

Re: VirtualBox 4.x & Lotus Notes Crash

Re: VirtualBox 4.x & Lotus Notes Crash

Re: VirtualBox 4.x & Lotus Notes Crash