I created a 20 GB disk in VB (static) and attached it to both of my opensol machines as primary / slave. Then I started machine A and created a zfs pool "hd1" with the whole new drive (/dev/rdsk/c7d1) and put ~5 GB of data on it. Finally, I powered down machine A.
Then I started machine B and wanted to access the data, so I also created a zfs pool with /dev/rdsk/c7d1. So basically the configuration is the very same on machine A and B. The only difference is, that machine A is using snv_123 while B is already on snv_123. The problem is, that only machine A can see the data on the new zfs pool. machine B says, that it's empty.
Machine A
Code: Select all
$ zpool list
NAME SIZE USED AVAIL CAP HEALTH ALTROOT
hd1 20.1G 5.67G 14.5G 28% ONLINE -
rpool 11.9G 10.0G 1.93G 83% ONLINE -
Code: Select all
$ zpool list
NAME SIZE USED AVAIL CAP HEALTH ALTROOT
hd1 20.1G 78.5K 20.1G 0% ONLINE -
rpool 15.9G 8.00G 7.88G 50% ONLINE -