32 bit Windows and 64 bit Ubuntu

[oldgraf]

Just upgraded Vbox from 2.2.4 to 3.0.6
Host is Vista 32bit
All 32 bit Guests are fine
I have 1 Ubuntu 9.04 64bit Guest and can't boot

Here is the a few lines from log
00:00:01.211 Changing the VM state from 'CREATING' to 'CREATED'.
00:00:01.211 Changing the VM state from 'CREATED' to 'RUNNING'.
00:00:01.213 Guest Log: BIOS: VirtualBox 3.0.6
00:00:01.213 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:01.299 PIIX3 ATA: Ctl#1: RESET, DevSel=0 AIOIf=0 CmdIf0=0x00 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:01.299 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:01.300 ATA: Ctl: RESET, DevSel=0 AIOIf=0 CmdIf0=0x00 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:01.300 ATA: Ctl: finished processing RESET
00:00:01.300 Guest Log: BIOS: ata2-0: PCHS=16383/16/63 LCHS=1024/255/63
00:00:01.300 PIT: mode=2 count=0x48d3 (18643) - 64.00 Hz (ch=0)
00:00:01.304 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=06e60000 w=640 h=480 bpp=32 cbLine=0xA00
00:00:03.784 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:03.786 Guest Log: BIOS: Boot from Floppy 0 failed
00:00:03.787 Guest Log: BIOS: CDROM boot failure code : 0003
00:00:03.787 Guest Log: BIOS: Boot from CD-ROM failed
00:00:03.787 Guest Log: BIOS: Booting from Hard Disk...
00:00:03.790 ATA: Ctl: RESET, DevSel=0 AIOIf=0 CmdIf0=0x20 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:03.790 ATA: Ctl: finished processing RESET
00:00:03.794 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00000000 w=720 h=400 bpp=0 cbLine=0x0
00:00:03.850 ATA: Ctl: RESET, DevSel=0 AIOIf=0 CmdIf0=0x20 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:03.850 ATA: Ctl: finished processing RESET
00:00:03.854 Guest Log: BIOS: int13_harddisk: function 41, unmapped device for ELDL=81
00:00:03.855 Guest Log: BIOS: int13_harddisk: function 08, unmapped device for ELDL=81
00:00:06.814 Guest Log: BIOS: *** int 15h function AX=ec00, BX=0002 not yet supported!
00:00:06.815 Guest Log: BIOS: KBD: unsupported int 16h function 03
00:00:07.199 PIT: mode=2 count=0x12a5 (4773) - 249.98 Hz (ch=0)
00:00:07.945 PIT: mode=0 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:08.896 PIIX3 ATA: Ctl#0: RESET, DevSel=0 AIOIf=0 CmdIf0=0x00 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:08.896 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:09.050 PIIX3 ATA: Ctl#1: RESET, DevSel=0 AIOIf=0 CmdIf0=0xa0 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:09.050 PIIX3 ATA: Ctl#1: finished processing RESET

Any ideas ? Thanks !

[Sasquatch]

Any other errors? Are you still able to use hardware virtualization? Is that enabled? Are you running a 32 bit VM without hardware-v when you boot the 64 bit Guest?

[oldgraf]

Just before upgrade Vbox i shutdown the working Ubuntu 64 bit !
I now realise that i have and one old Windows 7 64 bit RC from may.2009 - again no working OS. I "launch startup repair" and after loading some files i have only black screen

Edit: Downgrade to 2.2.4 - everything is fine !

[aredkin]

Got the same problem when trying to install Ubuntu 9.04 64-bit on Windows 7 32-bit host

[Sasquatch]

Got the same problem when trying to install Ubuntu 9.04 64-bit on Windows 7 32-bit host

It's currently a known problem that 64 bit guests don't work as they should in 3.0.6. Use 3.0.4 or older.