virtualbox.org

Hi!
I install WindowsXP as a Virtual Machine in FreeBSD 7.2
So I created bridge and tap interfaces for working network in Virtual Machine.

I used command fo create interfce in VirtualBox:

VBoxManage modifyvm "Windows" -nic1 bridged -bridgeadapter1 rl0 -nictrace1 on

Windows has Netcard with IP 192.168.100.100 ( ping Ok)
FreeBSD has netcard with IP 192.168.100.200 ( ping Ok)
But I can't ping each other.
What's it?
Thank's

Firewall?

NO
Only bridge.

XP has a firewall which is defaultly on, is that off?

No firewall in WindowsXP

I create tap and bridge with command

ifconfig bridge0 create
ifconfig tap0 create

ifconfig bridge0 addm tap0 addm rl0 up

Where "rl0" - physical interface with IP 192.168.100.200/24

I did like in QEMU.
Net in Virtual Machine work properly.

Gateway pointing elsewhere? what does traceroute say?

No ping ( ping only localhost and local IP)
No traceroute
I try create Vbox under root.
No result.

May be in FreeBSD exist special method of create bridge and tap like for Linux Ubuntu?

Can you ping your router?

Virtual Machine (Windows XP IP - 192.168.100.100) can't ping parent (FreeBSD - IP 192.168.100.200) and can't ping gateway (IP 192.168.100.1)
Traceroute from Windows - no path

That indicates the bridge isn't working at all, vbox version?

vbox -ver. 3.0.51.r22226
No error when starting.


Name: Win
Guest OS: Other/Unknown
UUID: ee667f45-2547-4486-b1af-28ef1ea76ce1
Config file: /root/.VirtualBox/Machines/Win/Win.xml
Memory size: 512MB
VRAM size: 8MB
Number of CPUs: 1
Boot menu mode: message and menu
Boot Device (1): Floppy
Boot Device (2): DVD
Boot Device (3): HardDisk
Boot Device (4): Not Assigned
ACPI: on
IOAPIC: off
PAE: off
Time offset: 0 ms
Hardw. virt.ext: on
Nested Paging: off
VT-x VPID: off
State: powered off (since 2009-08-28T09:22:48.000000000)
Monitor count: 1
3D Acceleration: off
Floppy: empty
SATA: disabled
IDE Controller: PIIX4
Primary master: /pub/home/hdaroot (UUID: 1f901521-57d0-455f-87c2-3d4e9f98ea18)
DVD: empty
NIC 1: MAC: 080027644687, Attachment: Bridged Interface 'rl0', Cable connected: on, Trace: on (file: none), Type: Am79C973, Reported speed: 0 Mbps
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
UART 1: disabled
UART 2: disabled
Audio: disabled
Clipboard Mode: Bidirectional
Shared folders: <none>

rl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 00:1e:8c:e9:aa:47
inet 192.168.100.200 netmask 0xffffff00 broadcast 192.168.100.255
media: Ethernet autoselect (100baseTX)
status: active
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 22:af:66:2f:57:b2
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 7 priority 128 path cost 2000000
member: rl0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 2 priority 128 path cost 55
tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:bd12:00:00