VM RedHat 5.3 on RedHat 5.3 Server

[annec]

Hello all;

I have an Red Hat Enterprise Linux 5.3 Server and install the VBox 2.1.4. I didn't see any problem during the installation.

But now I need create a VM to install Red Hat Enterprise Linux 5.3. After create that VM, I click on start, the VM found my DVD and begin the installation, the Red Hat screen appears with the question "How to Install" and I press "Enter" (In Graphical Mode), the Installation begin but stops always in the same place:

-- PIT: mode=2 count=0x4a9 (1193) - 1000.15 Hz (ch=0) --

This is a bug? How can I fix that? Note: I already try unselect the ACPI, network, usb, but didn't work.

Thanks in advanced...

Annec

____________________________
See below the log:
____________________________
00:00:01.733
00:00:01.733 [/Devices/AudioSniffer/0/] (level 3)
00:00:01.733
00:00:01.733 [/Devices/AudioSniffer/0/Config/] (level 4)
00:00:01.733
00:00:01.733 [/Devices/AudioSniffer/0/LUN#0/] (level 4)
00:00:01.733 Driver <string> = "MainAudioSniffer" (cch=17)
00:00:01.733
00:00:01.733 [/Devices/AudioSniffer/0/LUN#0/Config/] (level 5)
00:00:01.734 Object <integer> = 0x00000000087d7330 (142439216)
00:00:01.734
00:00:01.734 [/TM/] (level 1)
00:00:01.734 UTCOffset <integer> = 0x0000000000000000 (0)
00:00:01.734
00:00:01.734 ********************* End of CFGM dump **********************
00:00:01.735 Logical host processors: 3, processor active mask: 0000000000000007
00:00:01.735 ************************* CPUID dump ************************
00:00:01.735 RAW Standard CPUIDs
00:00:01.735 Function eax ebx ecx edx
00:00:01.735 Gst: 00000000 00000002 68747541 444d4163 69746e65
00:00:01.735 Hst: 00000005 68747541 444d4163 69746e65
00:00:01.735 Gst: 00000001 00100f23 00000800 00000009 078bf1bf
00:00:01.735 Hst: 00100f23 02030800 00802009 178bfbff
00:00:01.735 Gst: 00000002 00000000 00000000 00000000 00000000
00:00:01.735 Hst: 00000000 00000000 00000000 00000000
00:00:01.735 Gst: 00000003 00000000 00000000 00000000 00000000*
00:00:01.735 Hst: 00000000 00000000 00000000 00000000
00:00:01.735 Gst: 00000004 00000000 00000000 00000000 00000000*
00:00:01.735 Hst: 00000000 00000000 00000000 00000000
00:00:01.735 Gst: 00000005 00000000 00000000 00000000 00000000*
00:00:01.735 Hst: 00000040 00000040 00000003 00000000
00:00:01.735 Name: AuthenticAMD
00:00:01.735 Supports: 0-2
00:00:01.735 Family: 15 Extended: 1 Effective: 16
00:00:01.735 Model: 2 Extended: 0 Effective: 2
00:00:01.735 Stepping: 3
00:00:01.735 APIC ID: 0x00
00:00:01.735 Logical CPUs: 0
00:00:01.735 CLFLUSH Size: 8
00:00:01.735 Brand ID: 0x00
00:00:01.735 Mnemonic - Description = guest (host)
00:00:01.735 FPU - x87 FPU on Chip = 1 (1)
00:00:01.735 VME - Virtual 8086 Mode Enhancements = 1 (1)
00:00:01.735 DE - Debugging extensions = 1 (1)
00:00:01.735 PSE - Page Size Extension = 1 (1)
00:00:01.736 TSC - Time Stamp Counter = 1 (1)
00:00:01.736 MSR - Model Specific Registers = 1 (1)
00:00:01.736 PAE - Physical Address Extension = 0 (1)
00:00:01.736 MCE - Machine Check Exception = 1 (1)
00:00:01.736 CX8 - CMPXCHG8B instruction = 1 (1)
00:00:01.736 APIC - APIC On-Chip = 0 (1)
00:00:01.736 Reserved = 0 (0)
00:00:01.736 SEP - SYSENTER and SYSEXIT = 0 (1)
00:00:01.736 MTRR - Memory Type Range Registers = 1 (1)
00:00:01.736 PGE - PTE Global Bit = 1 (1)
00:00:01.736 MCA - Machine Check Architecture = 1 (1)
00:00:01.736 CMOV - Conditional Move Instructions = 1 (1)
00:00:01.736 PAT - Page Attribute Table = 1 (1)
00:00:01.736 PSE-36 - 36-bit Page Size Extention = 1 (1)
00:00:01.736 PSN - Processor Serial Number = 0 (0)
00:00:01.736 CLFSH - CLFLUSH Instruction. = 1 (1)
00:00:01.736 Reserved = 0 (0)
00:00:01.736 DS - Debug Store = 0 (0)
00:00:01.736 ACPI - Thermal Mon. & Soft. Clock Ctrl.= 0 (0)
00:00:01.736 MMX - Intel MMX Technology = 1 (1)
00:00:01.736 FXSR - FXSAVE and FXRSTOR Instructions = 1 (1)
00:00:01.736 SSE - SSE Support = 1 (1)
00:00:01.736 SSE2 - SSE2 Support = 1 (1)
00:00:01.736 SS - Self Snoop = 0 (0)
00:00:01.736 HTT - Hyper-Threading Technolog = 0 (1)
00:00:01.736 TM - Thermal Monitor = 0 (0)
00:00:01.736 30 - Reserved = 0 (0)
00:00:01.736 PBE - Pending Break Enable = 0 (0)
00:00:01.736 Supports SSE3 or not = 1 (1)
00:00:01.736 Reserved = 0 (0)
00:00:01.736 Supports MONITOR/MWAIT = 1 (1)
00:00:01.736 CPL-DS - CPL Qualified Debug Store = 0 (0)
00:00:01.736 VMX - Virtual Machine Technology = 0 (0)
00:00:01.736 Reserved = 0 (0)
00:00:01.736 Enhanced SpeedStep Technology = 0 (0)
00:00:01.736 Terminal Monitor 2 = 0 (0)
00:00:01.736 Supports Supplemental SSE3 or not = 0 (0)
00:00:01.736 L1 Context ID = 0 (0)
00:00:01.736 Reserved = 0x0 (0x0)
00:00:01.736 CMPXCHG16B = 0 (1)
00:00:01.736 xTPR Update Control = 0 (0)
00:00:01.736 Reserved = 0x0 (0x100)
00:00:01.736
00:00:01.736 RAW Extended CPUIDs
00:00:01.736 Function eax ebx ecx edx
00:00:01.736 Gst: 80000000 80000008 68747541 444d4163 69746e65
00:00:01.736 Hst: 8000001a 68747541 444d4163 69746e65
00:00:01.736 Gst: 80000001 00100f23 10000543 00000000 c383f13f
00:00:01.736 Hst: 00100f23 10000543 000007ff efd3fbff
00:00:01.736 Gst: 80000002 20444d41 6e656850 74286d6f 3820296d
00:00:01.736 Hst: 20444d41 6e656850 74286d6f 3820296d
00:00:01.736 Gst: 80000003 20303534 70697254 432d656c 2065726f
00:00:01.736 Hst: 20303534 70697254 432d656c 2065726f
00:00:01.736 Gst: 80000004 636f7250 6f737365 00000072 00000000
00:00:01.736 Hst: 636f7250 6f737365 00000072 00000000
00:00:01.736 Gst: 80000005 ff30ff10 ff30ff20 40020140 40020140
00:00:01.736 Hst: ff30ff10 ff30ff20 40020140 40020140
00:00:01.736 Gst: 80000006 20800000 42004200 02008140 0010a140
00:00:01.736 Hst: 20800000 42004200 02008140 0010a140
00:00:01.736 Gst: 80000007 00000000 00000000 00000000 00000100
00:00:01.736 Hst: 00000000 00000000 00000000 000001f9
00:00:01.736 Gst: 80000008 00003030 00000000 00000000 00000000
00:00:01.736 Hst: 00003030 00000000 00002002 00000000
00:00:01.736 Gst: 80000009 00000000 00000000 00000000 00000000*
00:00:01.736 Hst: 00000000 00000000 00000000 00000000
00:00:01.736 Ext Name: AuthenticAMD
00:00:01.736 Ext Supports: 0x80000000-0x80000008
00:00:01.736 Family: 15 Extended: 1 Effective: 16
00:00:01.736 Model: 2 Extended: 0 Effective: 2
00:00:01.736 Stepping: 3
00:00:01.736 Brand ID: 0x543
00:00:01.736 Mnemonic - Description = guest (host)
00:00:01.736 FPU - x87 FPU on Chip = 1 (1)
00:00:01.736 VME - Virtual 8086 Mode Enhancements = 1 (1)
00:00:01.736 DE - Debugging extensions = 1 (1)
00:00:01.736 PSE - Page Size Extension = 1 (1)
00:00:01.736 TSC - Time Stamp Counter = 1 (1)
00:00:01.736 MSR - K86 Model Specific Registers = 1 (1)
00:00:01.736 PAE - Physical Address Extension = 0 (1)
00:00:01.736 MCE - Machine Check Exception = 0 (1)
00:00:01.736 CX8 - CMPXCHG8B instruction = 1 (1)
00:00:01.736 APIC - APIC On-Chip = 0 (1)
00:00:01.736 10 - Reserved = 0 (0)
00:00:01.736 SEP - SYSCALL and SYSRET = 0 (1)
00:00:01.736 MTRR - Memory Type Range Registers = 1 (1)
00:00:01.736 PGE - PTE Global Bit = 1 (1)
00:00:01.736 MCA - Machine Check Architecture = 1 (1)
00:00:01.736 CMOV - Conditional Move Instructions = 1 (1)
00:00:01.736 PAT - Page Attribute Table = 1 (1)
00:00:01.736 PSE-36 - 36-bit Page Size Extention = 1 (1)
00:00:01.736 18 - Reserved = 0 (0)
00:00:01.736 19 - Reserved = 0 (0)
00:00:01.736 NX - No-Execute Page Protection = 0 (1)
00:00:01.736 DS - Debug Store = 0 (0)
00:00:01.736 AXMMX - AMD Extensions to MMX Instr. = 0 (1)
00:00:01.736 MMX - Intel MMX Technology = 1 (1)
00:00:01.736 FXSR - FXSAVE and FXRSTOR Instructions = 1 (1)
00:00:01.736 25 - AMD fast FXSAVE and FXRSTOR Instr.= 1 (1)
00:00:01.736 26 - 1 GB large page support = 0 (1)
00:00:01.736 27 - RDTSCP instruction = 0 (1)
00:00:01.737 28 - Reserved = 0 (0)
00:00:01.737 29 - AMD Long Mode = 0 (1)
00:00:01.737 30 - AMD Extensions to 3DNow = 1 (1)
00:00:01.737 31 - AMD 3DNow = 1 (1)
00:00:01.737 LahfSahf - LAHF/SAHF in 64-bit mode = 0 (1)
00:00:01.737 CmpLegacy - Core MP legacy mode (depr) = 0 (1)
00:00:01.737 SVM - AMD VM Extensions = 0 (1)
00:00:01.737 APIC registers starting at 0x400 = 0 (1)
00:00:01.737 AltMovCR8 - LOCK MOV CR0 means MOV CR8 = 0 (1)
00:00:01.737 Advanced bit manipulation = 0 (1)
00:00:01.737 SSE4A instruction support = 0 (1)
00:00:01.737 Misaligned SSE mode = 0 (1)
00:00:01.737 PREFETCH and PREFETCHW instruction = 0 (1)
00:00:01.737 OS visible workaround = 0 (1)
00:00:01.737 Instruction based sampling = 0 (1)
00:00:01.737 SSE5 support = 0 (0)
00:00:01.737 SKINIT, STGI, and DEV support = 0 (0)
00:00:01.737 Watchdog timer support. = 0 (0)
00:00:01.737 31:14 - Reserved = 0x0 (0x0)
00:00:01.737 Full Name: AMD Phenom(tm) 8450 Triple-Core Processor
00:00:01.737 TLB 2/4M Instr/Uni: 255 way 16 entries
00:00:01.737 TLB 2/4M Data: 255 way 48 entries
00:00:01.737 TLB 4K Instr/Uni: 255 way 32 entries
00:00:01.737 TLB 4K Data: 255 way 48 entries
00:00:01.737 L1 Instr Cache Line Size: 64 bytes
00:00:01.737 L1 Instr Cache Lines Per Tag: 1
00:00:01.737 L1 Instr Cache Associativity: 2 way
00:00:01.737 L1 Instr Cache Size: 64 KB
00:00:01.737 L1 Data Cache Line Size: 64 bytes
00:00:01.737 L1 Data Cache Lines Per Tag: 1
00:00:01.737 L1 Data Cache Associativity: 2 way
00:00:01.737 L1 Data Cache Size: 64 KB
00:00:01.737 L2 TLB 2/4M Instr/Uni: off 0 entries
00:00:01.737 L2 TLB 2/4M Data: 2 way 128 entries
00:00:01.737 L2 TLB 4K Instr/Uni: 4 way 512 entries
00:00:01.737 L2 TLB 4K Data: 4 way 512 entries
00:00:01.737 L2 Cache Line Size: 64 bytes
00:00:01.737 L2 Cache Lines Per Tag: 1
00:00:01.737 L2 Cache Associativity: res10
00:00:01.737 L2 Cache Size: 16 KB
00:00:01.737 APM Features: 8
00:00:01.737 Physical Address Width: 48 bits
00:00:01.737 Virtual Address Width: 48 bits
00:00:01.737 Physical Core Count: 0
00:00:01.737
00:00:01.737 RAW Centaur CPUIDs
00:00:01.737 Function eax ebx ecx edx
00:00:01.737 Gst: c0000000 00000000 00000000 00000000 00000000
00:00:01.737 Hst: 00000000 00000000 00000000 00000000
00:00:01.737 Gst: c0000001 00000000 00000000 00000000 00000000*
00:00:01.737 Hst: 00000000 00000000 00000000 00000000
00:00:01.737 Gst: c0000002 00000000 00000000 00000000 00000000*
00:00:01.737 Hst: 00000000 00000000 00000000 00000000
00:00:01.737 Gst: c0000003 00000000 00000000 00000000 00000000*
00:00:01.737 Hst: 00000000 00000000 00000000 00000000
00:00:01.737 Centaur Supports: 0xc0000000-0x00000000
00:00:01.737
00:00:01.737 ******************** End of CPUID dump **********************
00:00:01.740 REM: VBoxREM32
00:00:01.763 TM: GIP - u32Mode=1 (SyncTSC) u32UpdateHz=100
00:00:01.797 TM: cTSCTicksPerSecond=0x7d3590e4 (2100662500) fTSCVirtualized=true fTSCUseRealTSC=false
00:00:01.797 TM: fMaybeUseOffsettedHostTSC=true TSCTiedToExecution=false TSCNotTiedToHalt=false
00:00:01.797 CoreCode: R3=00746000 R0=f8eae000 RC=a05ac000 Phys=000000003317e000 cb=0x2000
00:00:01.807 SUP: Loaded VBoxDDR0.r0 (/usr/lib/virtualbox/VBoxDDR0.r0) at 0xf8faf060 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:01.808 SUP: Loaded VBoxDD2R0.r0 (/usr/lib/virtualbox/VBoxDD2R0.r0) at 0xf8eb1060 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:01.808 Activating Local APIC
00:00:01.808 CPUMSetGuestCpuIdFeature: Enabled APIC
00:00:01.808 CPUMSetGuestCpuIdFeature: Disabled x2APIC
00:00:01.808 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:01.813 Shared Folders service loaded.
00:00:01.822 VDInit finished
00:00:01.823 PIIX3 ATA: LUN#0: disk, PCHS=16383/16/63, total number of sectors 125829120
00:00:01.823 PIIX3 ATA: LUN#1: no unit
00:00:01.824 PIIX3 ATA: LUN#2: CD/DVD, total number of sectors 1425289, passthrough disabled
00:00:01.824 PIIX3 ATA: LUN#3: no unit
00:00:01.824 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:01.824 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:01.825 NAT: DNS address: 10.13.7.2
00:00:01.827 DevPcBios: ATA LUN#0 LCHS=1024/255/63
00:00:01.827 PGMR3InitFinalize: 4 MB PSE mask 0000000fffffffff
00:00:01.851 VM: Halt method global1 (5)
00:00:01.851 Changing the VM state from 'CREATING' to 'CREATED'.
00:00:01.851 Changing the VM state from 'CREATED' to 'RUNNING'.
00:00:01.856 Guest Log: BIOS: VirtualBox 2.1.4
00:00:01.857 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:01.874 PIIX3 ATA: Ctl#0: RESET, DevSel=0 AIOIf=0 CmdIf0=0x00 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:01.874 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:01.877 Guest Log: BIOS: ata0-0: PCHS=16383/16/63 LCHS=1024/255/63
00:00:01.878 PIIX3 ATA: Ctl#1: RESET, DevSel=0 AIOIf=0 CmdIf0=0x00 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:01.878 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:01.879 PIT: mode=2 count=0x48d3 (18643) - 64.00 Hz (ch=0)
00:00:01.899 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=03e5f000 w=640 h=480 bpp=32 cbLine=0xA00
00:00:04.358 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:04.366 Guest Log: BIOS: Booting from CD-ROM...
00:00:04.368 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00000000 w=720 h=400 bpp=0 cbLine=0x0
00:00:04.410 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=03e5f000 w=640 h=480 bpp=0 cbLine=0x140
00:00:06.408 Guest Log: BIOS: KBD: unsupported int 16h function 03
00:00:06.409 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00000000 w=720 h=400 bpp=0 cbLine=0x0
00:00:06.410 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:07.480 PIT: mode=2 count=0x4a9 (1193) - 1000.15 Hz (ch=0)

[annec]

Thanks for the response, but as I say, I'm using Red Hat Linux Enterprise 5.3 and not Debian, so the file /boot/loader.conf do not exist. I already try found something like that because I found that same post 2 days ago.

If I need change this same configuration on Red Hat too, how can I do that?


Thanks a lot...

Annec...

[TrevorPH]

Thanks for the response, but as I say, I'm using Red Hat Linux Enterprise 5.3 and not Debian, so the file /boot/loader.conf do not exist. I already try found something like that because I found that same post 2 days ago.

If I need change this same configuration on Red Hat too, how can I do that?


Thanks a lot...

Annec...

Redhat kernels take a divider= kernel boot parameter and will divide the default 1000HZ clock rate by the amount specified. Since this is the installer kernel you would need to pass that as an option to the initial boot prompt that the guest puts up, something like

boot: linux divider=10

will run the installer kernel with a 100Hz clock rate and may well help.

[basma-ritm]

hi,
I need to install virtualBox in redhat 5.3 (in text mode).
and install as virtual machine redhat 4.5 can u help me
thanks

[annec]

Hey all, I found the problem. After create an VM, clicl on Configurations and in Advanced, choose IO APIC for Red Hat Linux 5.3. Without that option, the VM stops always in the same place.

Thank all for the responses...

Annec.