Page 1 of 1
USB-Media not recognized
Posted: 25. Jan 2009, 11:48
by pico_c_nickel
Hello,
I've got a "Pico C" 8GB (Super Talent) usb flash drive but, there is one problem: VirtualBox 2.1.2 doesn't recognize it. When it is plugged in, VBoxManage list usbhost doesn't list it, too!
Can somebody help me? As I'm from Germany, I posted my question in the german forum first but, it seems that nobody has an answer for me...
I hope you can help me!
Posted: 25. Jan 2009, 16:34
by Sasquatch
First check if the host sees is properly. Run an
lsusb from a terminal, it should provide you with some information. If it's listed, then you should be able to select it in VB. By default, VB cannot access the USB system of Linux. See the
VirtualBox FAQ for some help getting it to work.
Posted: 25. Jan 2009, 20:49
by pico_c_nickel
The host sees it properly, lsusb lists it:
Code: Select all
Bus 004 Device 003: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 004 Device 002: ID 0a5c:2110 Broadcom Corp. Bluetooth Controller
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 005: ID 0000:0000
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
It is Device 005 on Bus 005 with ID 0000:0000.
Any other USB-device works properly in VB![/code]
Re: USB-Media not recognized
Posted: 25. Jan 2009, 21:15
by bjlockie
pico_c_nickel wrote:Hello,
I've got a "Pico C" 8GB (Super Talent) usb flash drive but, there is one problem: VirtualBox 2.1.2 doesn't recognize it. When it is plugged in, VBoxManage list usbhost doesn't list it, too!
Can somebody help me? As I'm from Germany, I posted my question in the german forum first but, it seems that nobody has an answer for me...
I hope you can help me!
Does VB see any USB stuff?
There are two versions, a closed source Sun version with USB and an open source version without USB.
Posted: 25. Jan 2009, 21:39
by pico_c_nickel
VB sees ALL USB stuff! Only that particular USB device is not seen by VB!
Code: Select all
VBoxManage list usbhost
VirtualBox Command Line Management Interface Version 2.1.2
(C) 2005-2009 Sun Microsystems, Inc.
All rights reserved.
Host USB Devices:
UUID: f1997431-1cf9-4963-bf7f-7b801a5a16f0
VendorId: 0x0483 (0483)
ProductId: 0x2016 (2016)
Revision: 0.1 (0001)
Manufacturer: STMicroelectronics
Product: Biometric Coprocessor
Address: /proc/bus/usb/004/003
Current State: Available
UUID: f53b6c7c-00e1-4d92-aa7e-46c06517bd88
VendorId: 0x0a5c (0A5C)
ProductId: 0x2110 (2110)
Revision: 1.0 (0100)
Manufacturer: Broadcom Corp
Product: BCM2045B
Address: /proc/bus/usb/004/002
Current State: Busy
As you can see, all other USB-Devices are listed!
Posted: 25. Jan 2009, 22:04
by bjlockie
Maybe because it doesn't have an id, maybe all 0 is not valid.
But VB should still recognize it (IMO).
Posted: 25. Jan 2009, 22:06
by pico_c_nickel
That missing ID was my first idea, too. Problem is, that it won't be possible to change those zeros...
Any idea?
Posted: 25. Jan 2009, 23:33
by bjlockie
I'm thinking the developers are ignoring IDs with zeros.
I don't have a suggested but to wait and see if a developer responds.
Posted: 25. Jan 2009, 23:47
by pico_c_nickel
OK, thank you anyway!
Let's wait...
Posted: 25. Jan 2009, 23:59
by baf
Well I'd say replace the usb thing it's broken.
But before that see if say windows recognizes it and install the correct drivers.
If so then I'm at a loss.
Good Luck.
Posted: 26. Jan 2009, 21:14
by pico_c_nickel
No, it's definitly not broken:
It works on the linux host!
It works on different windows pc's!
Thank you anyway.
Re: USB-Media not recognized
Posted: 16. Mar 2009, 17:04
by Lunatico
I second this.
I also have a
Pico 8GB drive.
lsusb list the device as:
Bus 003 Device 009: ID 0000:0000
Same thing on Windows. Zeros all the way... no id what so ever...
I tried creating a filter with the zeros but no luck.
Is there a way to tell VB to use that 0000:0000 device?
Thanks!
Re: USB-Media not recognized
Posted: 17. Mar 2009, 11:42
by Martin
Looks like a hardware problem for me. I don't think that the 0000:0000 ID is a valid USB ID...
Martin
Re: USB-Media not recognized
Posted: 25. Mar 2009, 19:56
by Lunatico
I saw some other posts over the Internet of other people with the same device showing as 0000:0000
BUT! The stupid drive died on me today.... that's what happens when you buy cheap! I learned my lesson now...