virtualbox.org

End user forums for VirtualBox
https://forums.virtualbox.org/

[solved] Errors on VB 2.1.0, openSUSE 11.0 64bit

https://forums.virtualbox.org/viewtopic.php?t=13548

Page 1 of 1

[solved] Errors on VB 2.1.0, openSUSE 11.0 64bit

Posted: 21. Jan 2009, 23:55
by oelk
Hi,
i tried to install VB 2.1.0 on openSUSE 11.0 (KDE3.5) 64bit
and got some errors.
required packages are installed.

Starting VB after installation is possible but guests aborting during installation.

HW is the new Shuttle SG45H7, G45 Express RAM 8GB
VT is on in BIOS
doesn't matter if VT is enabled in VB or not.
Installation:

rpm -ivh VirtualBox-2.1.0_41146_openSUSE11-1.x86_64.rpm

cat /var/log/vbox-install.log:

** Compiling vboxdrv
make KBUILD_VERBOSE= -C /lib/modules/2.6.25.20-0.1-default/build SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 modules
make -C /usr/src/linux-2.6.25.20-0.1 O=/usr/src/linux-2.6.25.20-0.1-obj/x86_64/default/. modules
make -C /usr/src/linux-2.6.25.20-0.1-obj/x86_64/default \
KBUILD_SRC=/usr/src/linux-2.6.25.20-0.1 \
KBUILD_EXTMOD="/tmp/vbox.0" -f /usr/src/linux-2.6.25.20-0.1/Makefile \
modules
CC [M] /tmp/vbox.0/linux/SUPDrv-linux.o
CC [M] /tmp/vbox.0/SUPDrv.o
CC [M] /tmp/vbox.0/r0drv/alloc-r0drv.o
CC [M] /tmp/vbox.0/r0drv/initterm-r0drv.o
CC [M] /tmp/vbox.0/r0drv/memobj-r0drv.o
CC [M] /tmp/vbox.0/r0drv/mpnotification-r0drv.o
CC [M] /tmp/vbox.0/r0drv/powernotification-r0drv.o
CC [M] /tmp/vbox.0/r0drv/linux/assert-r0drv-linux.o
CC [M] /tmp/vbox.0/r0drv/linux/alloc-r0drv-linux.o
CC [M] /tmp/vbox.0/r0drv/linux/initterm-r0drv-linux.o
CC [M] /tmp/vbox.0/r0drv/linux/memobj-r0drv-linux.o
CC [M] /tmp/vbox.0/r0drv/linux/mp-r0drv-linux.o
CC [M] /tmp/vbox.0/r0drv/linux/mpnotification-r0drv-linux.o
CC [M] /tmp/vbox.0/r0drv/linux/process-r0drv-linux.o
CC [M] /tmp/vbox.0/r0drv/linux/semevent-r0drv-linux.o
CC [M] /tmp/vbox.0/r0drv/linux/semeventmulti-r0drv-linux.o
CC [M] /tmp/vbox.0/r0drv/linux/semfastmutex-r0drv-linux.o
CC [M] /tmp/vbox.0/r0drv/linux/spinlock-r0drv-linux.o
CC [M] /tmp/vbox.0/r0drv/linux/thread-r0drv-linux.o
CC [M] /tmp/vbox.0/r0drv/linux/thread2-r0drv-linux.o
CC [M] /tmp/vbox.0/r0drv/linux/time-r0drv-linux.o
CC [M] /tmp/vbox.0/r0drv/linux/timer-r0drv-linux.o
CC [M] /tmp/vbox.0/common/err/RTErrConvertFromErrno.o
CC [M] /tmp/vbox.0/common/log/log.o
/tmp/vbox.0/common/log/log.c: In function ‘RTLogSetDefaultInstanceThread’:
/tmp/vbox.0/common/log/log.c:1495: warning: unused variable ‘RTASSERTVAR’
CC [M] /tmp/vbox.0/common/log/logellipsis.o
CC [M] /tmp/vbox.0/common/log/logrel.o
CC [M] /tmp/vbox.0/common/log/logrelellipsis.o
CC [M] /tmp/vbox.0/common/log/logcom.o
CC [M] /tmp/vbox.0/common/log/logformat.o
CC [M] /tmp/vbox.0/common/string/strformat.o
CC [M] /tmp/vbox.0/common/string/strformatrt.o
CC [M] /tmp/vbox.0/common/string/strformattype.o
CC [M] /tmp/vbox.0/common/string/strprintf.o
CC [M] /tmp/vbox.0/common/string/strtonum.o
CC [M] /tmp/vbox.0/r0drv/linux/RTLogWriteDebugger-r0drv-linux.o
CC [M] /tmp/vbox.0/generic/RTAssertShouldPanic-generic.o
CC [M] /tmp/vbox.0/generic/RTLogWriteStdErr-stub-generic.o
CC [M] /tmp/vbox.0/generic/RTLogWriteStdOut-stub-generic.o
CC [M] /tmp/vbox.0/generic/RTLogWriteUser-generic.o
CC [M] /tmp/vbox.0/VBox/log-vbox.o
/tmp/vbox.0/VBox/log-vbox.c: In function ‘RTLogDefaultInit’:
/tmp/vbox.0/VBox/log-vbox.c:384: warning: ISO C90 forbids mixed declarations and code
CC [M] /tmp/vbox.0/VBox/strformat-vbox.o
CC [M] /tmp/vbox.0/alloc/heapsimple.o
LD [M] /tmp/vbox.0/vboxdrv.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vbox.0/vboxdrv.mod.o
LD [M] /tmp/vbox.0/vboxdrv.ko

/var/log/warn:

Jan 21 21:12:24 linux kernel: VBoxDrv: dbg - g_abExecMemory=ffffffff883d5360
Jan 21 21:12:24 linux kernel: vboxdrv: fAsync=0 offMin=0xa5f offMax=0x17b2
Jan 21 21:18:49 linux kernel: VBoxDrv: dbg - g_abExecMemory=ffffffff883d3360
Jan 21 21:18:49 linux kernel: vboxdrv: fAsync=0 offMin=0x654 offMax=0x1d52

log of the VM (W2K):

00:17:58.023 Changing the VM state from 'RUNNING' to 'RESETTING'.
00:17:58.208 CPUMSetGuestCpuIdFeature: Enabled APIC
00:17:58.208 CPUMSetGuestCpuIdFeature: Disabled x2APIC
00:17:58.208 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:17:58.228 PIIX3 ATA: Ctl#0: finished processing RESET
00:17:58.323 PIIX3 ATA: Ctl#1: finished processing RESET
00:17:58.424 Audio: set_record_source ars=0 als=0 (not implemented)
00:17:58.438 Changing the VM state from 'RESETTING' to 'RUNNING'.
00:17:58.439 Guest Log: BIOS: VirtualBox 2.1.0
00:17:58.439 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:17:58.511 PIIX3 ATA: Ctl#0: RESET, DevSel=0 AIOIf=0 CmdIf0=0xe7 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:17:58.511 PIIX3 ATA: Ctl#0: finished processing RESET
00:17:58.512 Guest Log: BIOS: ata0-0: PCHS=16383/16/63 LCHS=1024/255/63
00:17:58.512 PIIX3 ATA: Ctl#1: RESET, DevSel=0 AIOIf=0 CmdIf0=0xa0 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:17:58.512 PIIX3 ATA: Ctl#1: finished processing RESET
00:17:58.513 PIT: mode=2 count=0x48d3 (18643) - 64.00 Hz (ch=0)
00:17:58.520 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007fea12db8000 w=640 h=480 bpp=32 cbLine=0xA00
00:18:00.689 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:18:00.689 Guest Log: BIOS: Booting from Hard Disk...
00:18:00.690 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:18:00.972 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:18:00.973 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:18:00.973 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:18:00.973 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:18:00.973 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:18:00.973 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:18:00.974 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:18:05.135 PIT: mode=2 count=0x2ead (11949) - 99.85 Hz (ch=0)
00:18:05.210 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007fea12db8000 w=640 h=480 bpp=0 cbLine=0x140
00:18:11.864 PIIX3 ATA: LUN#0: IDLE IMMEDIATE, CmdIf=0xc4 (-1 usec ago)
00:18:11.864 PIIX3 ATA: LUN#0: aborting current command
00:19:14.349 Audio: set_record_source ars=0 als=0 (not implemented)
00:19:14.350 Audio: set_record_source ars=4 als=4 (not implemented)
00:20:23.141 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:20:26.519 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007fea12db8000 w=640 h=480 bpp=0 cbLine=0x140
00:20:27.140 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:20:27.160 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007fea12db8000 w=640 h=480 bpp=0 cbLine=0x140
00:20:27.200 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:20:27.240 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007fea12db8000 w=640 h=480 bpp=0 cbLine=0x140
00:20:27.349 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:20:27.390 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007fea12db8000 w=640 h=480 bpp=0 cbLine=0x140
00:20:28.010 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:20:28.039 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007fea12db8000 w=640 h=480 bpp=0 cbLine=0x140
00:20:28.522 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:20:28.564 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007fea12db8000 w=640 h=480 bpp=0 cbLine=0x140
00:20:29.180 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:20:29.200 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007fea12db8000 w=640 h=480 bpp=0 cbLine=0x140
00:20:29.492 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:20:29.512 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007fea12db8000 w=640 h=480 bpp=0 cbLine=0x140
00:20:29.730 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:20:29.772 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007fea12db8000 w=640 h=480 bpp=0 cbLine=0x140
00:20:30.040 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:20:30.060 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007fea12db8000 w=640 h=480 bpp=0 cbLine=0x140
00:20:30.063 Changing the VM state from 'RUNNING' to 'RESETTING'.


lspci:

00:00.0 Host bridge: Intel Corporation Eaglelake DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Eaglelake Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Eaglelake HECI Controller (rev 03)
00:1a.0 USB Controller: Intel Corporation ICH10 USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation ICH10 USB UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation ICH10 USB UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation ICH10 USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation ICH10 HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation ICH10 PCI Express Port 1
00:1c.1 PCI bridge: Intel Corporation ICH10 PCI Express Port 2
00:1c.2 PCI bridge: Intel Corporation ICH10 PCI Express Port 3
00:1d.0 USB Controller: Intel Corporation ICH10 USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation ICH10 USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation ICH10 USB UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation ICH10 USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation ICH10 LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation ICH10 4 port SATA IDE Controller
00:1f.3 SMBus: Intel Corporation ICH10 SMBus Controller
00:1f.5 IDE interface: Intel Corporation ICH10 2 port SATA IDE Controller
02:00.0 FireWire (IEEE 1394): JMicron Technologies, Inc. IEEE 1394 Host Controller
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)

lsdev:

Device DMA IRQ I/O Ports
------------------------------------------------
4
0000:00:02.0 ff00-ff07
0000:00:1a.0 fe00-fe1f
0000:00:1a.1 fd00-fd1f
0000:00:1a.2 fc00-fc1f
0000:00:1d.0 fb00-fb1f
0000:00:1d.1 fa00-fa1f
0000:00:1d.2 f900-f91f
0000:00:1f.2 0170-0177 01f0-01f7 0376-0376 03f6-03f6 f700-f70f f800-f80f
0000:00:1f.3 0500-051f
0000:00:1f.5 f000-f00f f100-f10f f200-f203 f300-f307 f400-f403 f500-f507
0000:03:00.0 ee00-eeff
acpi 9
ACPI 0400-0403 0404-0405 0408-040b 0420-042f
ata_piix 14 15 19 0170-0177 01f0-01f7 0376-0376 03f6-03f6 f000-f00f f100-f10f f200-f203 f300-f307 f400-f403 f500-f507 f700-f70f f800-f80f
cascade 4
dma 0080-008f
dma1 0000-001f
dma2 00c0-00df
ehci_hcd:usb1 18
ehci_hcd:usb5 23
eth0 4348
fpu 00f0-00ff
HDA Intel 22
i801_smbus 0500-051f
i8042 1 12
keyboard 0060-006f
ohci1394 17
parport0 3 5 0278-027a 0678-067a
PCI 0cf8-0cff e000-efff
pic1 0020-0021
pic2 00a0-00a1
pnp 0290-0297 0400-04bf 04d0-04d1 0800-087f 0880-088f
rtc0 8 0070-0073
serial 03f8-03ff
sky2 ee00-eeff
timer 0
timer0 0040-0043
timer1 0050-0053
uhci_hcd f900-f91f fa00-fa1f fb00-fb1f fc00-fc1f fd00-fd1f fe00-fe1f
uhci_hcd:usb2 16
uhci_hcd:usb3 21
uhci_hcd:usb4 19
uhci_hcd:usb6 23
uhci_hcd:usb7 19
uhci_hcd:usb8 18
vesafb 03c0-03df

Posted: 22. Jan 2009, 19:12
by TerryE
Try 2.1.2 as its got a lot of fixes in it. If you still can't install then post back.

Errors on VB 2.1.0, openSUSE 11.0 64bit

Posted: 23. Jan 2009, 15:10
by oelk
Hm, funny:

I uninstalled it:
rpm -e VirtualBox
deleted all folders and installed the new version:
rpm -ivh VirtualBox-2.1.2_41885_openSUSE110-1.rpm
i missed the message "Successfully installed",but it was
startable.

I created a new vm over the gui with WINDOWS XP SP2 and it worked.

But:
as i tried to create a second vom with WINDOWS 2000 the
harddiskspace from the first vm was used.
XP dif boot !!!

Howcan i created a vm with VBoxManage:
VBoxManage createvm -name w2k -ostype "WINDOWS 2000"
VBoxManage createvm -name w2k -ostype "Windows 2000"
VBoxManage createvm -name w2k -ostype "WINDOWS2000"
VBoxManage createvm -name w2k -ostype "Windows2000"
VBoxManage createvm -name w2k -ostype 'Windows2000'
VBoxManage createvm -name w2k -ostype 'Windows2000'
???
The usermanual doesn't explain it exactly.

Achhim

Posted: 23. Jan 2009, 16:21
by TerryE
Last Q first -ostype win2k. Missed that option :lol:

Forgive me but I don't understand what you mean by "as i tried to create a second vm with WINDOWS 2000 the harddisk space from the first vm was used. XP dif boot !!!"

You can share HDs if they are immutable (see the User guide) otherwise you will need to clone the VDIs. Again discussed in manual

Posted: 23. Jan 2009, 17:57
by oelk
ok.
I cerated a vm "w2k" via gui, created harddiskspace "w2k" and
installed windows 2000.
Then i created a new vm "xp2" with new harddiskspace, the gui
said the name is "xp2", but when tried to boot the vm "xp2"
the harddiskspace from "w2k" booted.

So i tried to install the vms via VBoxManage createvm createhd and
modifyvm. This seems to work, but the options for the NICs are not
accepted. Is it:
-nic1 nat
-nic 1 nat
-nic1 NAT

"VBoxManage modifyvm w2k -biosbootmenu menuonly"
did also not work.

So i defined vm with VBoxManage, created vmhardisks and set
the rest of the settings.
Windows 2000 and XP could be installed succesfully.

It seems that the gui doesn't work correct in adding the vmhardisks.

Thanks

Posted: 24. Jan 2009, 10:02
by oelk
ok.
I did a complet installtion of openSUSE 11.0,
installed all the packages:
* kernel-source
* kernel-syms
* Xalan-c
* Xerces-c
* gcc
* make
installed virtual box:
sudo rpm -ivh VirtualBox-2.1.2_41885_openSUSE110-1.x86_64.rpm
After reboot i have this in /var/log/warn:
Jan 24 08:48:01 linux kernel: VBoxDrv: dbg - g_abExecMemory=ffffffff88429360
Jan 24 08:48:01 linux kernel: vboxdrv: fAsync=0 offMin=0x5b2 offMax=0x137a
Jan 24 08:48:01 linux kernel: vboxnetflt: no version for "SUPDrvLinuxIDC" found: kernel tainted.
Jan 24 08:48:01 linux kernel: VBoxNetFlt: dbg - g_abExecMemory=ffffffff885ca1c0
Jan 24 08:49:51 linux kernel: VBoxDrv: dbg - g_abExecMemory=ffffffff883b2360
Jan 24 08:49:51 linux kernel: vboxdrv: fAsync=0 offMin=0x32a offMax=0x24d8
Jan 24 08:49:51 linux kernel: vboxnetflt: no version for "SUPDrvLinuxIDC" found: kernel tainted.
Jan 24 08:49:51 linux kernel: VBoxNetFlt: dbg - g_abExecMemory=ffffffff8856a1c0

What did i do wrong?
AK

Posted: 24. Jan 2009, 11:42
by oelk
And again:
This is the log from an installation WINDOWS2000:
00:00:04.679 Guest Log: Key pressed: 002E
00:00:04.682 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:09.883 Guest Log: BIOS: Booting from CD-ROM...
00:00:11.186 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:11.186 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:11.186 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:11.186 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:11.186 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:11.186 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:11.186 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:01:51.867 PIT: mode=2 count=0x2ead (11949) - 99.85 Hz (ch=0)
00:01:51.915 CPUMSetGuestCpuIdFeature: Disabled x2APIC
00:01:52.443 PATM: Disable block at 815882c4 - write 815883b7-815883bb
00:01:57.147 PIIX3 ATA: LUN#0: IDLE IMMEDIATE, CmdIf=0xc4 (-1 usec ago)
00:01:57.147 PIIX3 ATA: LUN#0: aborting current command
00:02:02.154 PIIX3 ATA: LUN#2: CD-ROM passthrough cmd=0x5a sense=5 ASC=0x24 ASCQ=0x0 VERR_DEV_IO_ERROR
00:02:04.329 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=396 bpp=0 cbLine=0x0
00:02:09.787 PATM: Stop monitoring IDT handler pages at 815a9044 - invalid write 815a926c-815a926d (this is not a fatal error)
00:02:18.147 PATM: Stop monitoring IDT handler pages at 815a9b44 - invalid write 815a99f0-815a99f4 (this is not a fatal error)
00:04:10.018 Changing the VM state from 'RUNNING' to 'RESETTING'.
00:04:10.080 CPUMSetGuestCpuIdFeature: Enabled APIC
00:04:10.080 CPUMSetGuestCpuIdFeature: Disabled x2APIC
00:04:10.080 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:04:10.084 PIIX3 ATA: Ctl#0: finished processing RESET
00:04:10.184 PIIX3 ATA: Ctl#1: finished processing RESET
00:04:10.285 Audio: set_record_source ars=0 als=0 (not implemented)
00:04:10.285 Changing the VM state from 'RESETTING' to 'RUNNING'.
00:04:10.290 Guest Log: BIOS: VirtualBox 2.1.2
00:04:10.290 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:04:10.305 PIIX3 ATA: Ctl#0: RESET, DevSel=0 AIOIf=0 CmdIf0=0xe7 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:04:10.305 PIIX3 ATA: Ctl#0: finished processing RESET
00:04:10.307 Guest Log: BIOS: ata0-0: PCHS=8322/16/63 LCHS=522/255/63
00:04:10.309 PIIX3 ATA: Ctl#1: RESET, DevSel=0 AIOIf=0 CmdIf0=0xa0 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:04:10.309 PIIX3 ATA: Ctl#1: finished processing RESET
00:04:10.310 PIT: mode=2 count=0x48d3 (18643) - 64.00 Hz (ch=0)
00:04:10.314 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007ffd77000000 w=640 h=480 bpp=32 cbLine=0xA00
00:04:12.567 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:04:12.569 Guest Log: BIOS: Booting from Hard Disk...
00:04:12.575 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:04:12.894 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:04:12.894 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:04:12.894 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:04:12.894 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:04:12.895 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:04:12.895 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:04:12.895 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:04:15.941 PIT: mode=2 count=0x2ead (11949) - 99.85 Hz (ch=0)
00:04:15.975 CPUMSetGuestCpuIdFeature: Disabled x2APIC
00:04:16.001 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007ffd77000000 w=640 h=480 bpp=0 cbLine=0x140
00:04:21.524 PIIX3 ATA: LUN#0: IDLE IMMEDIATE, CmdIf=0xc4 (-1 usec ago)
00:04:21.537 PIIX3 ATA: LUN#0: aborting current command
00:04:26.525 PIIX3 ATA: LUN#2: CD-ROM passthrough cmd=0x5a sense=5 ASC=0x24 ASCQ=0x0 VERR_DEV_IO_ERROR
00:04:41.114 PATM: Disable block at 814d6b44 - write 814d6c61-814d6c65
00:04:41.202 PATM: Stop monitoring IDT handler pages at 81592044 - invalid write 81592a28-81592a2c (this is not a fatal error)
00:04:41.205 PATM: Stop monitoring IDT handler pages at 81592b44 - invalid write 815929ef-815929f0 (this is not a fatal error)
00:05:12.748 PCNet#0: Init: ss32=1 GCRDRA=0x013b7220[32] GCTDRA=0x013b7020[32]
00:05:13.623 Audio: set_record_source ars=0 als=0 (not implemented)
00:05:13.625 Audio: set_record_source ars=4 als=4 (not implemented)
00:06:21.664 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:06:25.563 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007ffd77000000 w=640 h=480 bpp=0 cbLine=0x140
00:06:25.904 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:06:25.924 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007ffd77000000 w=640 h=480 bpp=0 cbLine=0x140
00:06:26.461 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:06:26.481 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007ffd77000000 w=640 h=480 bpp=0 cbLine=0x140
00:06:26.792 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:06:26.812 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007ffd77000000 w=640 h=480 bpp=0 cbLine=0x140
00:06:26.985 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:06:27.006 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007ffd77000000 w=640 h=480 bpp=0 cbLine=0x140
00:06:27.176 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:06:27.204 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007ffd77000000 w=640 h=480 bpp=0 cbLine=0x140
00:06:27.367 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:06:27.388 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007ffd77000000 w=640 h=480 bpp=0 cbLine=0x140
00:06:27.516 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:06:27.559 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007ffd77000000 w=640 h=480 bpp=0 cbLine=0x140
00:08:29.360 PCNet#0: Init: ss32=1 GCRDRA=0x013b7220[32] GCTDRA=0x013b7020[32]
00:08:29.371 NAT: DHCP offered IP address 10.0.2.15
00:08:29.377 NAT: DHCP offered IP address 10.0.2.15
00:08:29.384 PCNet#0: Init: ss32=1 GCRDRA=0x013b7220[32] GCTDRA=0x013b7020[32]
00:09:27.284 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:09:27.288 Changing the VM state from 'RUNNING' to 'RESETTING'.
???
Best regards

Posted: 24. Jan 2009, 16:37
by Sasquatch
oelk wrote:ok.
I cerated a vm "w2k" via gui, created harddiskspace "w2k" and
installed windows 2000.
Then i created a new vm "xp2" with new harddiskspace, the gui
said the name is "xp2", but when tried to boot the vm "xp2"
the harddiskspace from "w2k" booted.

So i tried to install the vms via VBoxManage createvm createhd and
modifyvm. This seems to work, but the options for the NICs are not
accepted. Is it:
-nic1 nat
-nic 1 nat
-nic1 NAT

"VBoxManage modifyvm w2k -biosbootmenu menuonly"
did also not work.

So i defined vm with VBoxManage, created vmhardisks and set
the rest of the settings.
Windows 2000 and XP could be installed succesfully.

It seems that the gui doesn't work correct in adding the vmhardisks.

Thanks
When you create a new VM, and for the question which hard disk to use, the dropdown menu will list the already existing images. Hit the 'New' button to create a new hard disk, which will then get selected.
This is done in case you remove the VM, but not the Virtual Hard Disk. In previous versions, the dropdown menu wasn't populated, now it is. Just keep an eye on that next time you create another VM.

Posted: 25. Jan 2009, 09:48
by oelk
Hi Sasquatch,

i did it that way but the 2nd vm used the harddiskspce from
the first vm.

What about the last line before
"Changing the VM state from 'RUNNING' to 'RESETTING'":
"Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0 "

Do i have a prolem with my RAM respectively Video RAM?

This is a very new shuttle barebone SG45H7 with 8GB RAM
and Intel® Graphics Media Accelerator (GMA) X4500HD(onboard).

Does the vm use the RAMs or the Video RAMs for VRAM?

Thanks
AK

Posted: 25. Jan 2009, 16:31
by Sasquatch
I'm not certain which RAM it actually takes, but I suggest not to set it higher than the default 8 MB unless you really have to.

Posted: 28. Jan 2009, 12:25
by oelk
Hi,
it seems the problem is on the network side:

The first two installations were at home using DHCP on the host.
That didn't work.

The third installation in my company with static ip and gw and proxy
on the host worked and the kernelmodules where correctly translated,
vms can now installed nad can be used.

Does vboxdrv, vboxnetflt need a static ip ?

What about the other files in the directory
http://download.opensuse.org/repositori ... .0/x86_64/
kbuild, libmudflap, libgfortran and so on?
Are they needed for installation/building of the kernel-module
or needed for building the whole virtualbox package?

AK

Posted: 1. Feb 2009, 21:03
by oelk
I think it is solved:

WINDOWS2000 could not installed cause the installation
saw the QuadCore CPU through acpi and WINDOWS2000
is noot able to operate with multiple CPUs.
Disableing acpi in the properties of this vm would help.

Thank
All times are UTC+02:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited