Windows 11 and 10 boot up issue
Windows 11 and 10 boot up issue
It's been some time since I've used VM software so sorry if I don't know exactly what's going on.
I am having an issue when I try to run windows 11 or 10 on a VM while I am hosting on my Mac. I am following a video and I think the issue might be the CPU that I am allowing in the VM but I cannot change that cause it is greyed out. When I initially set up the VM I am selecting 3-4 CPU but when I double check in the settings of the VM after I finish making it, the CPU is 1 and I can't change it. The guy's video I am watching does not have this issue but I am almost sure that is what is causing the VM to crash when I try to boot it up.
After it fails it just gives me a message that says there was a critical error and to check the forums. I would appreciate any help with this.
Thank you!
I am having an issue when I try to run windows 11 or 10 on a VM while I am hosting on my Mac. I am following a video and I think the issue might be the CPU that I am allowing in the VM but I cannot change that cause it is greyed out. When I initially set up the VM I am selecting 3-4 CPU but when I double check in the settings of the VM after I finish making it, the CPU is 1 and I can't change it. The guy's video I am watching does not have this issue but I am almost sure that is what is causing the VM to crash when I try to boot it up.
After it fails it just gives me a message that says there was a critical error and to check the forums. I would appreciate any help with this.
Thank you!
- Attachments
-
- Picture of what it looks like in settings.
- Screenshot 2024-02-16 at 2.31.11 PM.png (3.84 KiB) Viewed 3150 times
Re: Windows 11 and 10 boot up issue
Your attachment seems to not have made it... please provide again.
Re: Windows 11 and 10 boot up issue
Did it come through in the previous reply?
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: Windows 11 and 10 boot up issue
No, or actually yes, but the picture appears to be of a tiny rectangle.
If the screenshot is only of the window that mentioned the critical error, then the log file that the error mentioned would be much more helpful.
Note that if you're using an M1/M2/M# Mac, it won't run modern OS's in Virtualbox. The ARM tech preview is not up to that yet
If the screenshot is only of the window that mentioned the critical error, then the log file that the error mentioned would be much more helpful.
Note that if you're using an M1/M2/M# Mac, it won't run modern OS's in Virtualbox. The ARM tech preview is not up to that yet
Re: Windows 11 and 10 boot up issue
Which part of the logs would you like? I am currently running VirtualBox 7.0.8 which I believe is supported. I watched a video to make sure. Thank you.
here is the last bit:
00:02:05.227492 usb-xhci#0: PCI MMIO=00000000f2020000 IRQ=11 MSI=off R0=false RC=false
00:02:05.227493 USBCMD: 0:
00:02:05.227494 USBSTS: 1: HCH
00:02:05.227494 DNCTRL: 0 CONFIG: 0 (0 slots)
00:02:05.227494 DCBAA ptr: 0000000000000000
00:02:05.227495 CRCR: 0:
00:02:05.227495 CRCR ptr : 0000000000000000
00:02:05.227495 Port 01 (USB2): PORTSC: 206A1: CCS PLS=5 PP SPD=1 CSC
00:02:05.227497 Port 02 (USB2): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227497 Port 03 (USB2): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227498 Port 04 (USB2): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227499 Port 05 (USB2): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227499 Port 06 (USB2): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227500 Port 07 (USB2): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227500 Port 08 (USB2): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227501 Port 09 (USB3): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227501 Port 10 (USB3): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227502 Port 11 (USB3): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227502 Port 12 (USB3): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227503 Port 13 (USB3): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227503 Port 14 (USB3): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227504 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
here is the last bit:
00:02:05.227492 usb-xhci#0: PCI MMIO=00000000f2020000 IRQ=11 MSI=off R0=false RC=false
00:02:05.227493 USBCMD: 0:
00:02:05.227494 USBSTS: 1: HCH
00:02:05.227494 DNCTRL: 0 CONFIG: 0 (0 slots)
00:02:05.227494 DCBAA ptr: 0000000000000000
00:02:05.227495 CRCR: 0:
00:02:05.227495 CRCR ptr : 0000000000000000
00:02:05.227495 Port 01 (USB2): PORTSC: 206A1: CCS PLS=5 PP SPD=1 CSC
00:02:05.227497 Port 02 (USB2): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227497 Port 03 (USB2): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227498 Port 04 (USB2): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227499 Port 05 (USB2): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227499 Port 06 (USB2): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227500 Port 07 (USB2): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227500 Port 08 (USB2): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227501 Port 09 (USB3): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227501 Port 10 (USB3): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227502 Port 11 (USB3): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227502 Port 12 (USB3): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227503 Port 13 (USB3): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227503 Port 14 (USB3): PORTSC: 2A0: PLS=5 PP SPD=0
00:02:05.227504 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Re: Windows 11 and 10 boot up issue
Please let me know if it did not come through.
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: Windows 11 and 10 boot up issue
Thanks for the log.
Yup, that's an M# ARM Mac, and modern Windows won't run in Virtualbox on it. Please see M1/M2 Mac 7.0 Beta Status.00:00:00.654542 VirtualBox VM 7.0.8_BETA4 r156879 darwin.arm64
Re: Windows 11 and 10 boot up issue
So would I need to download another version of VBox or can is it not possible to run it on my Mac for right now?