Windows XP Installation Stops at the beginning [SOLVED PROVISIONALLY]
-
- Posts: 18
- Joined: 26. Jun 2017, 21:41
Windows XP Installation Stops at the beginning [SOLVED PROVISIONALLY]
After formatting a new guest hard drive, the Windows XP installation loads, but then it does nothing.
It just sits there at "Preparing Installation" instead of displaying a green bar.
I have attached a log file.
It just sits there at "Preparing Installation" instead of displaying a green bar.
I have attached a log file.
Last edited by laukinming on 25. Jan 2024, 14:22, edited 5 times in total.
-
- Posts: 18
- Joined: 26. Jun 2017, 21:41
Re: Windows XP Installation Stops at the beginning
OK, found the problem: I enabled a bunch of virtualisation features instead of enabling the BIOS settings (i.e. the BIOS has somehow reset since my last wipe) and made this mess.
Luckily, I undid it and it's back to normal.
Apologies for the bother.
Luckily, I undid it and it's back to normal.
Apologies for the bother.
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: Windows XP Installation Stops at the beginning
No problem! Thanks for letting us know you found a solution.
-
- Posts: 18
- Joined: 26. Jun 2017, 21:41
Re: Windows XP Installation Stops at the beginning
The problem has resurfaced.
I'm using a later version, 7.0.14.
This time, it is from a system wipe and I have not messed with any of the Windows Features, including those that have to do with virtualisation.
Another log has been attached.
I'm using a later version, 7.0.14.
This time, it is from a system wipe and I have not messed with any of the Windows Features, including those that have to do with virtualisation.
Another log has been attached.
- Attachments
-
- Extended Games Support-2024-01-24-15-02-43.zip
- (30.79 KiB) Downloaded 62 times
-
- Posts: 18
- Joined: 26. Jun 2017, 21:41
Re: Windows XP Installation Stops at the beginning
I've currently tried to wipe my hard drive again and putting Windows 11 Build 22631.3007 without adding the Cumulative Preview.
I still haven't added any more features other than DirectlPlay and SMB1.0/CIFS file sharing support.
I have another computer, a Linux Mint machine, and it boots the XP installer just fine. I know it's this computer's problem, but I can't pinpoint the source. Downgrading was attempted, and the problem persists.
So far, I never enabled any of the virtualisation features because I know that they're not to enable, or am I wrong.
Please help!
I still haven't added any more features other than DirectlPlay and SMB1.0/CIFS file sharing support.
I have another computer, a Linux Mint machine, and it boots the XP installer just fine. I know it's this computer's problem, but I can't pinpoint the source. Downgrading was attempted, and the problem persists.
So far, I never enabled any of the virtualisation features because I know that they're not to enable, or am I wrong.
Please help!
-
- Posts: 18
- Joined: 26. Jun 2017, 21:41
Re: Windows XP Installation Stops at the beginning
No need.
I enabled the Virtual Machine Platform on Windows 11.
Remember to do that!
Case closed for now.
I enabled the Virtual Machine Platform on Windows 11.
Remember to do that!
Case closed for now.
-
- Posts: 18
- Joined: 26. Jun 2017, 21:41
Re: Windows XP Installation Stops at the beginning
OK, problem is back.
I don't know how, but the problem just came back and I didn't make changes to other settings.
This time, I tried enabling both Virtual Machine Platform and Windows Hypervisor Platform.
Now I am going to try Windows Hypervisor Platform on its own.
If you have any advice, I would welcome it.
I don't know how, but the problem just came back and I didn't make changes to other settings.
This time, I tried enabling both Virtual Machine Platform and Windows Hypervisor Platform.
Now I am going to try Windows Hypervisor Platform on its own.
If you have any advice, I would welcome it.
-
- Posts: 18
- Joined: 26. Jun 2017, 21:41
Re: Windows XP Installation Stops at the beginning
OK, enabled Virtual Machine Platform by its lonesome yet again, and works.
Sometimes I can't understand my computer.
Sometimes I can't understand my computer.
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: Windows XP Installation Stops at the beginning [SOLVED PROVISIONALLY]
In some fashion or other, your Windows 11 host is enabling Hyper-V, which has been known to interfere with Virtualbox. HMR3Init: Attempting fall back to NEM (Hyper-V is active) has some ways that the forum gurus have found to disable Hyper-V, at the expense of some of Windows' security features. Risk/benefit analysis is needed by you to determine if full-open Virtualbox or Hyper-V security is more important.
That your enabling some Hyper-V features gets Virtualbox going is interesting. It could be there's some combination of other Hyper-V items running, some of which are enabled in the computer's BIOS now.
FWIW Windows keeps coming up with more Hyper-V-related services that the Virtualbox devs are constantly having to work through. It is possible that the tutorial above will get out of date, until someone reports a new Hyper-V service and how to turn it off.
That your enabling some Hyper-V features gets Virtualbox going is interesting. It could be there's some combination of other Hyper-V items running, some of which are enabled in the computer's BIOS now.
FWIW Windows keeps coming up with more Hyper-V-related services that the Virtualbox devs are constantly having to work through. It is possible that the tutorial above will get out of date, until someone reports a new Hyper-V service and how to turn it off.
-
- Posts: 18
- Joined: 26. Jun 2017, 21:41
Re: Windows XP Installation Stops at the beginning [SOLVED PROVISIONALLY]
No, I didn't enable Hyper-V, I enabled Virtual Machine Platform.
Hyper-V is off.
Hyper-V is off.
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: Windows XP Installation Stops at the beginning [SOLVED PROVISIONALLY]
Virtual Machine Platform uses Hyper-V. If you enabled the one, it enables the other. If the green turtle is present. Hyper-V is enabled.laukinming wrote: ↑26. Jan 2024, 01:00 No, I didn't enable Hyper-V, I enabled Virtual Machine Platform.
Do you see the green turtle?
-
- Posts: 18
- Joined: 26. Jun 2017, 21:41
Re: Windows XP Installation Stops at the beginning [SOLVED PROVISIONALLY]
No, I haven't the faintest idea what you're talking about.
Green turtle? I just know that when I enabled Virtual Machine Platform, the problem was solved.
Well, for better or worse, it works, until next time.
Green turtle? I just know that when I enabled Virtual Machine Platform, the problem was solved.
Well, for better or worse, it works, until next time.
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: Windows XP Installation Stops at the beginning [SOLVED PROVISIONALLY]
See the tutorial linked above, paragraph starting with "You might notice in the guest window's Status Bar"...
-
- Posts: 18
- Joined: 26. Jun 2017, 21:41
Re: Windows XP Installation Stops at the beginning [SOLVED PROVISIONALLY]
OK, I did remember that I enabled "Memory Integrity" on Defender, which might have caused all this, so I turned it off.
I also turned off "Virtual Machine Platform," "Hyper-V," and "Hypervisor Platform," and the system still runs, and this time, without the turtle icon.
Thank you.
But I will leave this to be ongoing and shall still put it on "Solved Provisionally," but at least it's fine.
I also turned off "Virtual Machine Platform," "Hyper-V," and "Hypervisor Platform," and the system still runs, and this time, without the turtle icon.
Thank you.
But I will leave this to be ongoing and shall still put it on "Solved Provisionally," but at least it's fine.