Virtualbox 6.1.16 USB passthrough problem (failed to attach)
Posted: 10. Dec 2020, 15:09
Hello,
I'm having problem with USB passthrough on currently newest available Virtualbox (6.1.16).
When I want to capture a device - it says Failed to attach the USB device <name> to the virtual machine (error E_INVALIDARG 0x700800057).
Host: Windows 10 2004
Guest: Windows 10 1904 (guest additions installed).
Virtualbox: 6.1.16 with Extension pack 6.1.16r140961
Hyper-V function is NOT enabled on the host. I had wireshark installed, but I've removed it.
Tried to capture device "manually", and via filter (if via filter - device is not appearing on the Guest OS, if manually I've always receive Failed to attach message). Both host and guest were rebooted. I've also tried with changing USB Controller version (all of them: 1.1, 2.0 and 3.0) on the VM USB Settings. Device of course connected BEFORE guest OS start.
The same issue is happening with other guest OS (based on Windows XP), some time ago - with older (probably) Virtualbox 5.x it worked flawlessly!
Some more details below:
VMInfo
I'm having problem with USB passthrough on currently newest available Virtualbox (6.1.16).
When I want to capture a device - it says Failed to attach the USB device <name> to the virtual machine (error E_INVALIDARG 0x700800057).
Host: Windows 10 2004
Guest: Windows 10 1904 (guest additions installed).
Virtualbox: 6.1.16 with Extension pack 6.1.16r140961
Hyper-V function is NOT enabled on the host. I had wireshark installed, but I've removed it.
Tried to capture device "manually", and via filter (if via filter - device is not appearing on the Guest OS, if manually I've always receive Failed to attach message). Both host and guest were rebooted. I've also tried with changing USB Controller version (all of them: 1.1, 2.0 and 3.0) on the VM USB Settings. Device of course connected BEFORE guest OS start.
The same issue is happening with other guest OS (based on Windows XP), some time ago - with older (probably) Virtualbox 5.x it worked flawlessly!
Some more details below:
Code: Select all
Extension Packs: 1
Pack no. 0: Oracle VM VirtualBox Extension Pack
Version: 6.1.16
Revision: 140961
Edition:
Description: Oracle Cloud Infrastructure integration, USB 2.0 and USB 3.0 Host Controller, Host Webcam, VirtualBox RDP, PXE ROM, Disk Encryption, NVMe.
VRDE Module: VBoxVRDP
Usable: true
Why unusable:Code: Select all
Name: Delphi DS150e
Groups: /
Guest OS: Windows 10 (64-bit)
UUID: 46a9d26b-22fd-4625-8e04-09d5c502b631
Config file: C:\Virtual\Delphi DS150e\Delphi DS150e.vbox
Snapshot folder: C:\Virtual\Delphi DS150e\Snapshots
Log folder: C:\Virtual\Delphi DS150e\Logs
Hardware UUID: 46a9d26b-22fd-4625-8e04-09d5c502b631
Memory size 3072MB
Page Fusion: disabled
VRAM size: 128MB
CPU exec cap: 100%
HPET: disabled
CPUProfile: host
Chipset: piix3
Firmware: BIOS
Number of CPUs: 2
PAE: disabled
Long Mode: enabled
Triple Fault Reset: disabled
APIC: enabled
X2APIC: disabled
Nested VT-x/AMD-V: disabled
CPUID Portability Level: 0
CPUID overrides: None
Boot menu mode: message and menu
Boot Device 1: Floppy
Boot Device 2: DVD
Boot Device 3: HardDisk
Boot Device 4: Not Assigned
ACPI: enabled
IOAPIC: enabled
BIOS APIC mode: APIC
Time offset: 0ms
RTC: local time
Hardware Virtualization: enabled
Nested Paging: enabled
Large Pages: enabled
VT-x VPID: enabled
VT-x Unrestricted Exec.: enabled
Paravirt. Provider: Default
Effective Paravirt. Prov.: HyperV
State: powered off (since 2020-12-10T12:34:00.000000000)
Graphics Controller: VBoxSVGA
Monitor count: 1
3D Acceleration: disabled
2D Video Acceleration: disabled
Teleporter Enabled: disabled
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: disabled
Allow Tracing to Access VM: disabled
Tracing Configuration:
Autostart Enabled: disabled
Autostart Delay: 0
Default Frontend:
VM process priority: default
Storage Controller Name (0): SATA
Storage Controller Type (0): IntelAhci
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 30
Storage Controller Port Count (0): 2
Storage Controller Bootable (0): on
SATA (0, 0): C:\Virtual\Delphi DS150e\Delphi DS150e.vdi (UUID: 523e7603-c4a9-4a61-82fe-d9c43cffa2e5)
SATA (1, 0): C:\Program Files\Oracle\VirtualBox\VBoxGuestAdditions.iso (UUID: 0dbdf01f-acb9-4c4c-abbf-451e13e1cebd)
NIC 1: MAC: 0800274F09B8, Attachment: NAT, Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 1 Settings: MTU: 0, Socket (send: 64, receive: 64), TCP Window (send:64, receive: 64)
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: USB Tablet
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
UART 3: disabled
UART 4: disabled
LPT 1: disabled
LPT 2: disabled
Audio: enabled (Driver: DSOUND, Controller: HDA, Codec: STAC9221)
Audio playback: enabled
Audio capture: enabled
Clipboard Mode: disabled
Drag and drop Mode: disabled
VRDE: disabled
OHCI USB: enabled
EHCI USB: enabled
xHCI USB: disabled
USB Device Filters:
Index: 0
Active: yes
Name: FTDI Autocom CDP+ USB [0600]
VendorId: 0403
ProductId: d6da
Revision: 0600
Manufacturer: FTDI
Product: Autocom CDP+ USB
Remote: 0
Serial Number: FTadpCDP
Bandwidth groups: <none>
Shared folders:<none>
Capturing: not active
Capture audio: not active
Capture screens: 0
Capture file: C:\Virtual\Delphi DS150e\Delphi DS150e.webm
Capture dimensions: 1024x768
Capture rate: 512kbps
Capture FPS: 25kbps
Capture options:
Guest:
Configured memory balloon size: 0MB