VirtualBox running as a Host on Windows 10 Pro appears to Abort at work where I have two 4K Asus Monitors (MG284Q and PB287) however does not Abort at home where I have two 4K Dell Monitors.
The log file is attached for the Abort.
Virtualbox 6.1.16 r140961 with Guest Additions, Bridged Networking (ASIX AX88179 USB 3.0 Gigabit Ethernet Adapter)
Running Windows 10 Pro as Host, (Dell XPS 9550 32 MB RAM, 1 TB HDD)
Running Ubuntu 20.04 as Guest, (78 GB HDD, 8 GB RAM, 4 CPUS, IDE PIX4 using Host I/O Cache)
Code: Select all
$ lsb_release -a
Distributor ID: Ubuntu
Description: Ubuntu 20.04.1 LTS
Release: 20.04
Codename: focal
Code: Select all
C:\Program Files\Oracle\VirtualBox>VBoxManage list runningvms
"Numen Docker VM" {af986363-6ad8-4c0a-b1cb-ca1808644d9f}
C:\Program Files\Oracle\VirtualBox>VBoxManage showvminfo "Numen Docker VM"
Name: Numen Docker VM
Groups: /Numen Dev VMs
Guest OS: Ubuntu (64-bit)
UUID: af986363-6ad8-4c0a-b1cb-ca1808644d9f
Config file: D:\VirtualMachines\Numen Docker VM\Numen Docker VM.vbox
Snapshot folder: D:\VirtualMachines\Numen Docker VM\Snapshots
Log folder: D:\VirtualMachines\Numen Docker VM\Logs
Hardware UUID: af986363-6ad8-4c0a-b1cb-ca1808644d9f
Memory size 8192MB
Page Fusion: disabled
VRAM size: 128MB
CPU exec cap: 100%
HPET: disabled
CPUProfile: host
Chipset: piix3
Firmware: BIOS
Number of CPUs: 4
PAE: disabled
Long Mode: enabled
Triple Fault Reset: disabled
APIC: enabled
X2APIC: enabled
Nested VT-x/AMD-V: disabled
CPUID Portability Level: 0
CPUID overrides: None
Boot menu mode: message and menu
Boot Device 1: Floppy
Boot Device 2: DVD
Boot Device 3: HardDisk
Boot Device 4: Not Assigned
ACPI: enabled
IOAPIC: enabled
BIOS APIC mode: APIC
Time offset: 0ms
RTC: UTC
Hardware Virtualization: enabled
Nested Paging: enabled
Large Pages: enabled
VT-x VPID: enabled
VT-x Unrestricted Exec.: enabled
Paravirt. Provider: Default
Effective Paravirt. Prov.: KVM
State: running (since 2020-11-09T07:50:54.838000000)
Graphics Controller: VMSVGA
Monitor count: 1
3D Acceleration: disabled
2D Video Acceleration: disabled
Teleporter Enabled: disabled
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: disabled
Allow Tracing to Access VM: disabled
Tracing Configuration:
Autostart Enabled: disabled
Autostart Delay: 0
Default Frontend:
VM process priority: default
Storage Controller Name (0): IDE
Storage Controller Type (0): PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 2
Storage Controller Port Count (0): 2
Storage Controller Bootable (0): on
Storage Controller Name (1): SATA
Storage Controller Type (1): IntelAhci
Storage Controller Instance Number (1): 0
Storage Controller Max Port Count (1): 30
Storage Controller Port Count (1): 1
Storage Controller Bootable (1): on
IDE (1, 0): D:\VirtualMachines\VBoxGuestAdditions_6.1.4.iso (UUID: 0eed742a-76c8-412e-994c-0971f9a152a6)
SATA (0, 0): D:\VirtualMachines\Numen Docker VM\Numen Docker VM.vdi (UUID: 6c759b47-6e52-4580-b639-2e6c5346e382)
NIC 1: MAC: 080027C58220, Attachment: Bridged Interface 'ASIX AX88179 USB 3.0 to Gigabit Ethernet Adapter', Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: USB Tablet
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
UART 3: disabled
UART 4: disabled
LPT 1: disabled
LPT 2: disabled
Audio: enabled (Driver: DSOUND, Controller: AC97, Codec: AD1980)
Audio playback: enabled
Audio capture: disabled
Clipboard Mode: Bidirectional
Drag and drop Mode: Bidirectional
Session name: GUI/Qt
Video mode: 3838x1976x32 at 0,0 enabled
VRDE: disabled
OHCI USB: enabled
EHCI USB: enabled
xHCI USB: disabled
USB Device Filters:
<none>
Available remote USB devices:
<none>
Currently Attached USB Devices:
<none>
Bandwidth groups: <none>
Shared folders:<none>
VRDE Connection: not active
Clients so far: 0
Capturing: not active
Capture audio: not active
Capture screens: 0
Capture file: D:\VirtualMachines\Numen Docker VM\Numen Docker VM.webm
Capture dimensions: 3742577805x1
Capture rate: 512kbps
Capture FPS: 2029900424kbps
Capture options:
Guest:
Configured memory balloon size: 0MB
OS type: Linux26_64
Additions run level: 2
Additions version: 6.1.2 r135662
Guest Facilities:
Facility "VirtualBox Base Driver": active/running (last update: 2020/11/09 07:51:07 UTC)
Facility "VirtualBox System Service": active/running (last update: 2020/11/09 07:51:27 UTC)
Facility "Seamless Mode": active/running (last update: 2020/11/09 07:52:08 UTC)
Facility "Graphics Mode": active/running (last update: 2020/11/09 07:51:27 UTC)
Thanks,
Mark