ubuntu7.04

Discussions about using Linux guests in VirtualBox.
MoonKid
Posts: 11
Joined: 21. May 2007, 16:52

ubuntu7.04

Post by MoonKid »

I tried to install ubuntu-7.04-desktop-i386.iso on a VirtualBox machine
with WinXP as host machine.

The install cd starts and I select "install". Then the ubuntu logo with
the orange progress bar is shown. After some seconds my own physical pc (not the virtualbox machine!) make a "reset".

There is no freez, no error message. It is just as I would press the
reset button on my physical machine.

Did anyone tried to install ubuntu on VirutalBox?

I tried it in a fresh and new created machine.

VB runs on WinXPSP2
MoonKid
Posts: 11
Joined: 21. May 2007, 16:52

Post by MoonKid »

The log is this
00:00:00.795 VirtualBox 1.3.8 (Mar 13 2007 18:18:56) release log
00:00:00.795 Log opened 2007-05-21T15:15:23.920964800Z
00:00:01.003 ************************* CFGM dump *************************
00:00:01.003 pRoot=00f0f888:{/}
00:00:01.003 [/] (level 0)
00:00:01.003 Name <string> = "ubuntu" (cch=7)
00:00:01.003 RamSize <integer> = 0x000000000c000000 (201326592)
00:00:01.003 TimerMillies <integer> = 0x000000000000000a (10)
00:00:01.003 RawR3Enabled <integer> = 0x0000000000000001 (1)
00:00:01.003 RawR0Enabled <integer> = 0x0000000000000001 (1)
00:00:01.003 PATMEnabled <integer> = 0x0000000000000001 (1)
00:00:01.003 CSAMEnabled <integer> = 0x0000000000000001 (1)
00:00:01.003
00:00:01.003 [/PDM/] (level 1)
00:00:01.003
00:00:01.003 [/PDM/Drivers/] (level 2)
00:00:01.003
00:00:01.003 [/PDM/Drivers/VBoxC/] (level 3)
00:00:01.003 Path <string> = "VBoxC" (cch=6)
00:00:01.003
00:00:01.004 [/Devices/] (level 1)
00:00:01.004
00:00:01.004 [/Devices/pcarch/] (level 2)
00:00:01.004
00:00:01.004 [/Devices/pcarch/0/] (level 3)
00:00:01.004 Trusted <integer> = 0x0000000000000001 (1)
00:00:01.004
00:00:01.004 [/Devices/pcarch/0/Config/] (level 4)
00:00:01.004
00:00:01.004 [/Devices/pcbios/] (level 2)
00:00:01.004
00:00:01.004 [/Devices/pcbios/0/] (level 3)
00:00:01.004 Trusted <integer> = 0x0000000000000001 (1)
00:00:01.004
00:00:01.004 [/Devices/pcbios/0/Config/] (level 4)
00:00:01.004 RamSize <integer> = 0x000000000c000000 (201326592)
00:00:01.004 HardDiskDevice <string> = "piix3ide" (cch=9)
00:00:01.004 FloppyDevice <string> = "i82078" (cch=7)
00:00:01.004 BootDevice0 <string> = "FLOPPY" (cch=7)
00:00:01.004 BootDevice1 <string> = "DVD" (cch=4)
00:00:01.004 BootDevice2 <string> = "IDE" (cch=4)
00:00:01.004 BootDevice3 <string> = "NONE" (cch=5)
00:00:01.004 FadeIn <integer> = 0x0000000000000001 (1)
00:00:01.004 FadeOut <integer> = 0x0000000000000001 (1)
00:00:01.004 LogoTime <integer> = 0x0000000000000000 (0)
00:00:01.004 LogoFile <string> = "" (cch=1)
00:00:01.004 ShowBootMenu <integer> = 0x0000000000000002 (2)
00:00:01.004
00:00:01.004 [/Devices/acpi/] (level 2)
00:00:01.004
00:00:01.004 [/Devices/acpi/0/] (level 3)
00:00:01.004 Trusted <integer> = 0x0000000000000001 (1)
00:00:01.004 PCIDeviceNo <integer> = 0x0000000000000007 (7)
00:00:01.004 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:01.004
00:00:01.004 [/Devices/acpi/0/Config/] (level 4)
00:00:01.004 RamSize <integer> = 0x000000000c000000 (201326592)
00:00:01.004 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:01.004
00:00:01.004 [/Devices/acpi/0/LUN#0/] (level 4)
00:00:01.004 Driver <string> = "ACPIHost" (cch=9)
00:00:01.004
00:00:01.004 [/Devices/acpi/0/LUN#0/Config/] (level 5)
00:00:01.004
00:00:01.004 [/Devices/8237A/] (level 2)
00:00:01.004
00:00:01.004 [/Devices/8237A/0/] (level 3)
00:00:01.004 Trusted <integer> = 0x0000000000000001 (1)
00:00:01.004
00:00:01.004 [/Devices/pci/] (level 2)
00:00:01.004
00:00:01.004 [/Devices/pci/0/] (level 3)
00:00:01.004 Trusted <integer> = 0x0000000000000001 (1)
00:00:01.004
00:00:01.004 [/Devices/pci/0/Config/] (level 4)
00:00:01.004 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:01.004
00:00:01.004 [/Devices/pckbd/] (level 2)
00:00:01.004
00:00:01.004 [/Devices/pckbd/0/] (level 3)
00:00:01.004 Trusted <integer> = 0x0000000000000001 (1)
00:00:01.004
00:00:01.004 [/Devices/pckbd/0/Config/] (level 4)
00:00:01.004
00:00:01.004 [/Devices/pckbd/0/LUN#0/] (level 4)
00:00:01.004 Driver <string> = "KeyboardQueue" (cch=14)
00:00:01.004
00:00:01.004 [/Devices/pckbd/0/LUN#0/Config/] (level 5)
00:00:01.005 QueueSize <integer> = 0x0000000000000040 (64)
00:00:01.005
00:00:01.005 [/Devices/pckbd/0/LUN#0/AttachedDriver/] (level 5)
00:00:01.005 Driver <string> = "MainKeyboard" (cch=13)
00:00:01.005
00:00:01.005 [/Devices/pckbd/0/LUN#0/AttachedDriver/Config/] (level 6)
00:00:01.005 Object <integer> = 0x0000000000f5a7b8 (16099256)
00:00:01.005
00:00:01.005 [/Devices/pckbd/0/LUN#1/] (level 4)
00:00:01.005 Driver <string> = "MouseQueue" (cch=11)
00:00:01.005
00:00:01.005 [/Devices/pckbd/0/LUN#1/Config/] (level 5)
00:00:01.005 QueueSize <integer> = 0x0000000000000080 (128)
00:00:01.005
00:00:01.005 [/Devices/pckbd/0/LUN#1/AttachedDriver/] (level 5)
00:00:01.005 Driver <string> = "MainMouse" (cch=10)
00:00:01.005
00:00:01.005 [/Devices/pckbd/0/LUN#1/AttachedDriver/Config/] (level 6)
00:00:01.005 Object <integer> = 0x0000000000f5a880 (16099456)
00:00:01.005
00:00:01.005 [/Devices/i82078/] (level 2)
00:00:01.005
00:00:01.005 [/Devices/i82078/0/] (level 3)
00:00:01.005 Trusted <integer> = 0x0000000000000001 (1)
00:00:01.005
00:00:01.005 [/Devices/i82078/0/Config/] (level 4)
00:00:01.005 IRQ <integer> = 0x0000000000000006 (6)
00:00:01.005 DMA <integer> = 0x0000000000000002 (2)
00:00:01.005 MemMapped <integer> = 0x0000000000000000 (0)
00:00:01.005 IOBase <integer> = 0x00000000000003f0 (1008)
00:00:01.005
00:00:01.005 [/Devices/i82078/0/LUN#999/] (level 4)
00:00:01.005 Driver <string> = "MainStatus" (cch=11)
00:00:01.005
00:00:01.005 [/Devices/i82078/0/LUN#999/Config/] (level 5)
00:00:01.005 papLeds <integer> = 0x0000000000eda6b8 (15574712)
00:00:01.005 First <integer> = 0x0000000000000000 (0)
00:00:01.005 Last <integer> = 0x0000000000000000 (0)
00:00:01.005
00:00:01.005 [/Devices/i82078/0/LUN#0/] (level 4)
00:00:01.005 Driver <string> = "Block" (cch=6)
00:00:01.005
00:00:01.005 [/Devices/i82078/0/LUN#0/Config/] (level 5)
00:00:01.005 Type <string> = "Floppy 1.44" (cch=12)
00:00:01.005 Mountable <integer> = 0x0000000000000001 (1)
00:00:01.005
00:00:01.005 [/Devices/i8254/] (level 2)
00:00:01.005
00:00:01.005 [/Devices/i8254/0/] (level 3)
00:00:01.005
00:00:01.005 [/Devices/i8254/0/Config/] (level 4)
00:00:01.005
00:00:01.005 [/Devices/i8259/] (level 2)
00:00:01.005
00:00:01.005 [/Devices/i8259/0/] (level 3)
00:00:01.005 Trusted <integer> = 0x0000000000000001 (1)
00:00:01.005
00:00:01.005 [/Devices/i8259/0/Config/] (level 4)
00:00:01.006
00:00:01.006 [/Devices/apic/] (level 2)
00:00:01.006
00:00:01.006 [/Devices/apic/0/] (level 3)
00:00:01.006 Trusted <integer> = 0x0000000000000001 (1)
00:00:01.006
00:00:01.006 [/Devices/apic/0/Config/] (level 4)
00:00:01.006
00:00:01.006 [/Devices/mc146818/] (level 2)
00:00:01.006
00:00:01.006 [/Devices/mc146818/0/] (level 3)
00:00:01.006
00:00:01.006 [/Devices/mc146818/0/Config/] (level 4)
00:00:01.006
00:00:01.006 [/Devices/vga/] (level 2)
00:00:01.006
00:00:01.006 [/Devices/vga/0/] (level 3)
00:00:01.006 Trusted <integer> = 0x0000000000000001 (1)
00:00:01.006 PCIDeviceNo <integer> = 0x0000000000000002 (2)
00:00:01.006 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:01.006
00:00:01.006 [/Devices/vga/0/Config/] (level 4)
00:00:01.006 VRamSize <integer> = 0x0000000000800000 (8388608)
00:00:01.006 CustomVideoModes <integer> = 0x0000000000000000 (0)
00:00:01.006 HeightReduction <integer> = 0x0000000000000000 (0)
00:00:01.006
00:00:01.006 [/Devices/vga/0/LUN#0/] (level 4)
00:00:01.006 Driver <string> = "MainDisplay" (cch=12)
00:00:01.006
00:00:01.006 [/Devices/vga/0/LUN#0/Config/] (level 5)
00:00:01.006 Object <integer> = 0x0000000000f5a940 (16099648)
00:00:01.006
00:00:01.006 [/Devices/piix3ide/] (level 2)
00:00:01.006
00:00:01.006 [/Devices/piix3ide/0/] (level 3)
00:00:01.006 Trusted <integer> = 0x0000000000000001 (1)
00:00:01.006 PCIDeviceNo <integer> = 0x0000000000000001 (1)
00:00:01.006 PCIFunctionNo <integer> = 0x0000000000000001 (1)
00:00:01.006
00:00:01.006 [/Devices/piix3ide/0/Config/] (level 4)
00:00:01.006
00:00:01.006 [/Devices/piix3ide/0/LUN#999/] (level 4)
00:00:01.006 Driver <string> = "MainStatus" (cch=11)
00:00:01.006
00:00:01.006 [/Devices/piix3ide/0/LUN#999/Config/] (level 5)
00:00:01.006 papLeds <integer> = 0x0000000000eda6c0 (15574720)
00:00:01.006 First <integer> = 0x0000000000000000 (0)
00:00:01.006 Last <integer> = 0x0000000000000003 (3)
00:00:01.006
00:00:01.006 [/Devices/piix3ide/0/LUN#0/] (level 4)
00:00:01.006 Driver <string> = "Block" (cch=6)
00:00:01.006
00:00:01.006 [/Devices/piix3ide/0/LUN#0/Config/] (level 5)
00:00:01.006 Type <string> = "HardDisk" (cch=9)
00:00:01.006 Mountable <integer> = 0x0000000000000000 (0)
00:00:01.006
00:00:01.006 [/Devices/piix3ide/0/LUN#0/AttachedDriver/] (level 5)
00:00:01.006 Driver <string> = "VBoxHDD" (cch=8)
00:00:01.006
00:00:01.006 [/Devices/piix3ide/0/LUN#0/AttachedDriver/Config/] (level 6)
00:00:01.007 Path <string> = "D:\VirtualBoxEnv\VDI\ubuntu1.vdi" (cch=33)
00:00:01.007
00:00:01.007 [/Devices/piix3ide/0/LUN#2/] (level 4)
00:00:01.007 Driver <string> = "Block" (cch=6)
00:00:01.007
00:00:01.007 [/Devices/piix3ide/0/LUN#2/Config/] (level 5)
00:00:01.007 Type <string> = "DVD" (cch=4)
00:00:01.007 Mountable <integer> = 0x0000000000000001 (1)
00:00:01.007
00:00:01.007 [/Devices/piix3ide/0/LUN#2/AttachedDriver/] (level 5)
00:00:01.007 Driver <string> = "MediaISO" (cch=9)
00:00:01.007
00:00:01.007 [/Devices/piix3ide/0/LUN#2/AttachedDriver/Config/] (level 6)
00:00:01.007 Path <string> = "Z:\_CD\ubuntu-7.04-desktop-i386.iso" (cch=36)
00:00:01.007
00:00:01.007 [/Devices/pcnet/] (level 2)
00:00:01.007
00:00:01.007 [/Devices/pcnet/0/] (level 3)
00:00:01.007 Trusted <integer> = 0x0000000000000001 (1)
00:00:01.007 PCIDeviceNo <integer> = 0x0000000000000003 (3)
00:00:01.007 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:01.007
00:00:01.007 [/Devices/pcnet/0/Config/] (level 4)
00:00:01.007 Am79C973 <integer> = 0x0000000000000001 (1)
00:00:01.007 MAC <bytes> = "08 00 27 47 a1 44" (cb=6)
00:00:01.007 CableConnected <integer> = 0x0000000000000001 (1)
00:00:01.007
00:00:01.007 [/Devices/pcnet/0/LUN#999/] (level 4)
00:00:01.007 Driver <string> = "MainStatus" (cch=11)
00:00:01.007
00:00:01.007 [/Devices/pcnet/0/LUN#999/Config/] (level 5)
00:00:01.007 papLeds <integer> = 0x0000000000eda6d0 (15574736)
00:00:01.007
00:00:01.007 [/Devices/pcnet/0/LUN#0/] (level 4)
00:00:01.007 Driver <string> = "NAT" (cch=4)
00:00:01.007
00:00:01.007 [/Devices/pcnet/0/LUN#0/Config/] (level 5)
00:00:01.007
00:00:01.007 [/Devices/VMMDev/] (level 2)
00:00:01.007
00:00:01.007 [/Devices/VMMDev/0/] (level 3)
00:00:01.007 Trusted <integer> = 0x0000000000000001 (1)
00:00:01.007 PCIDeviceNo <integer> = 0x0000000000000004 (4)
00:00:01.007 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:01.007
00:00:01.007 [/Devices/VMMDev/0/Config/] (level 4)
00:00:01.007
00:00:01.007 [/Devices/VMMDev/0/LUN#0/] (level 4)
00:00:01.007 Driver <string> = "MainVMMDev" (cch=11)
00:00:01.007
00:00:01.007 [/Devices/VMMDev/0/LUN#0/Config/] (level 5)
00:00:01.007 Object <integer> = 0x0000000000f5ab78 (16100216)
00:00:01.007
00:00:01.007 [/Devices/AudioSniffer/] (level 2)
00:00:01.007
00:00:01.007 [/Devices/AudioSniffer/0/] (level 3)
00:00:01.007
00:00:01.007 [/Devices/AudioSniffer/0/Config/] (level 4)
00:00:01.007
00:00:01.007 [/Devices/AudioSniffer/0/LUN#0/] (level 4)
00:00:01.008 Driver <string> = "MainAudioSniffer" (cch=17)
00:00:01.008
00:00:01.008 [/Devices/AudioSniffer/0/LUN#0/Config/] (level 5)
00:00:01.008 Object <integer> = 0x0000000000f5adc0 (16100800)
00:00:01.008
00:00:01.008 ********************* End of CFGM dump **********************
00:00:01.054 Logical host processors: 1, processor active mask: 00000001
00:00:01.054 ************************* CPUID dump ************************
00:00:01.054 RAW Standard CPUIDs
00:00:01.054 Function eax ebx ecx edx
00:00:01.054 Gst: 00000000 00000001 68747541 444d4163 69746e65
00:00:01.054 Hst: 00000001 68747541 444d4163 69746e65
00:00:01.054 Gst: 00000001 00000622 0000ffff 00000000 0180a1bd
00:00:01.054 Hst: 00000622 00000000 00000000 0183f9ff
00:00:01.054 Gst: 00000002 00000000 00000000 00000000 00000000*
00:00:01.054 Hst: 00000000 00000000 00000000 00000000
00:00:01.054 Gst: 00000003 00000000 00000000 00000000 00000000*
00:00:01.054 Hst: 00000000 00000000 00000000 00000000
00:00:01.054 Gst: 00000004 00000000 00000000 00000000 00000000*
00:00:01.054 Hst: 00000000 00000000 00000000 00000000
00:00:01.054 Gst: 00000005 80000004 68747541 444d4163 69746e65*
00:00:01.054 Hst: 00000000 00000000 00000000 00000000
00:00:01.054 Name: AuthenticAMD
00:00:01.054 Supports: 0-1
00:00:01.054 Family: 6 Extended: 0 Effectiv: 6
00:00:01.054 Model: 2 Extended: 0 Effectiv: 2
00:00:01.055 Stepping: 2
00:00:01.055 APIC ID: 0x00
00:00:01.055 Logical CPUs: 0
00:00:01.055 CLFLUSH Size: 255
00:00:01.055 Brand ID: 0xff
00:00:01.055 Mnemonic - Description = guest (host)
00:00:01.055 FPU - x87 FPU on Chip = 1 (1)
00:00:01.055 VME - Virtual 8086 Mode Enhancements = 0 (1)
00:00:01.055 DE - Debugging extensions = 1 (1)
00:00:01.055 PSE - Page Size Extension = 1 (1)
00:00:01.055 TSC - Time Stamp Counter = 1 (1)
00:00:01.055 MSR - Model Specific Registers = 1 (1)
00:00:01.055 PAE - Physical Address Extension = 0 (1)
00:00:01.055 MCE - Machine Check Exception = 1 (1)
00:00:01.055 CX8 - CMPXCHG8B instruction = 1 (1)
00:00:01.055 APIC - APIC On-Chip = 0 (0)
00:00:01.055 Reserved = 0 (0)
00:00:01.055 SEP - SYSENTER and SYSEXIT = 0 (1)
00:00:01.055 MTRR - Memory Type Range Registers = 0 (1)
00:00:01.055 PGE - PTE Global Bit = 1 (1)
00:00:01.055 MCA - Machine Check Architecture = 0 (1)
00:00:01.055 CMOV - Conditional Move Instructions = 1 (1)
00:00:01.055 PAT - Page Attribute Table = 0 (1)
00:00:01.055 PSE-36 - 36-bit Page Size Extention = 0 (1)
00:00:01.055 PSN - Processor Serial Number = 0 (0)
00:00:01.055 CLFSH - CLFLUSH Instruction. = 0 (0)
00:00:01.055 Reserved = 0 (0)
00:00:01.055 DS - Debug Store = 0 (0)
00:00:01.055 ACPI - Thermal Mon. & Soft. Clock Ctrl.= 0 (0)
00:00:01.055 MMX - Intel MMX Technology = 1 (1)
00:00:01.055 FXSR - FXSAVE and FXRSTOR Instructions = 1 (1)
00:00:01.055 SSE - SSE Support = 0 (0)
00:00:01.055 SSE2 - SSE2 Support = 0 (0)
00:00:01.055 SS - Self Snoop = 0 (0)
00:00:01.055 HTT - Hyper-Threading Technolog = 0 (0)
00:00:01.055 TM - Thermal Monitor = 0 (0)
00:00:01.055 30 - Reserved = 0 (0)
00:00:01.055 PBE - Pending Break Enable = 0 (0)
00:00:01.055 Supports SSE3 or not = 0 (0)
00:00:01.055 Reserved = 0 (0)
00:00:01.055 Supports MONITOR/MWAIT = 0 (0)
00:00:01.055 CPL-DS - CPL Qualified Debug Store = 0 (0)
00:00:01.055 VMX - Virtual Machine Technology = 0 (0)
00:00:01.055 Reserved = 0 (0)
00:00:01.055 Enh. SpeedStep Tech = 0 (0)
00:00:01.055 Terminal Monitor 2 = 0 (0)
00:00:01.055 Reserved = 0 (0)
00:00:01.055 L1 Context ID = 0 (0)
00:00:01.055 Reserved = 0x0 (0x0)
00:00:01.055 L1 Context ID = 0 (0)
00:00:01.055 Reserved = 0x0 (0x0)
00:00:01.055
00:00:01.055 RAW Extended CPUIDs
00:00:01.055 Function eax ebx ecx edx
00:00:01.055 Gst: 80000000 80000004 68747541 444d4163 69746e65
00:00:01.055 Hst: 80000006 68747541 444d4163 69746e65
00:00:01.055 Gst: 80000001 00000722 00000000 00000000 c181a13d
00:00:01.055 Hst: 00000722 00000000 00000000 c1c3f9ff
00:00:01.055 Gst: 80000002 20444d41 6c687441 74286e6f 5020296d
00:00:01.055 Hst: 20444d41 6c687441 74286e6f 5020296d
00:00:01.055 Gst: 80000003 65636f72 726f7373 00000000 00000000
00:00:01.055 Hst: 65636f72 726f7373 00000000 00000000
00:00:01.055 Gst: 80000004 00000000 00000000 00000000 00000000
00:00:01.055 Hst: 00000000 00000000 00000000 00000000
00:00:01.055 Gst: 80000005 00000000 00000000 00000000 00000000*
00:00:01.055 Hst: 0408ff08 ff18ff10 40020140 40020140
00:00:01.055 Gst: 80000006 00000000 00000000 00000000 00000000*
00:00:01.055 Hst: 00000000 41004100 02002140 00000000
00:00:01.055 Gst: 80000007 00000000 00000000 00000000 00000000*
00:00:01.055 Hst: 00000000 00000000 00000000 00000000
00:00:01.055 Gst: 80000008 00000000 00000000 00000000 00000000*
00:00:01.055 Hst: 00000000 00000000 00000000 00000000
00:00:01.055 Gst: 80000009 00000000 00000000 00000000 00000000*
00:00:01.055 Hst: 00000000 00000000 00000000 00000000
00:00:01.055 Gst: 8000000a 00000000 00000000 00000000 00000000*
00:00:01.055 Hst: 00000000 00000000 00000000 00000000
00:00:01.055 Ext Name: AuthenticAMD
00:00:01.055 Ext Supports: 0x80000000-0x80000004
00:00:01.055 Family: 7 Extended: 0 Effectiv: 7
00:00:01.055 Model: 2 Extended: 0 Effectiv: 2
00:00:01.055 Stepping: 2
00:00:01.055 Brand ID: 0x000
00:00:01.055 Mnemonic - Description = guest (host)
00:00:01.055 FPU - x87 FPU on Chip = 1 (1)
00:00:01.055 VME - Virtual 8086 Mode Enhancements = 0 (1)
00:00:01.055 DE - Debugging extensions = 1 (1)
00:00:01.055 PSE - Page Size Extension = 1 (1)
00:00:01.055 TSC - Time Stamp Counter = 1 (1)
00:00:01.055 MSR - K86 Model Specific Registers = 1 (1)
00:00:01.055 PAE - Physical Address Extension = 0 (1)
00:00:01.055 MCE - Machine Check Exception = 0 (1)
00:00:01.055 CX8 - CMPXCHG8B instruction = 1 (1)
00:00:01.055 APIC - APIC On-Chip = 0 (0)
00:00:01.055 10 - Reserved = 0 (0)
00:00:01.055 SEP - SYSCALL and SYSRET = 0 (1)
00:00:01.055 MTRR - Memory Type Range Registers = 0 (1)
00:00:01.055 PGE - PTE Global Bit = 1 (1)
00:00:01.055 MCA - Machine Check Architecture = 0 (1)
00:00:01.055 CMOV - Conditional Move Instructions = 1 (1)
00:00:01.055 PAT - Page Attribute Table = 1 (1)
00:00:01.055 PSE-36 - 36-bit Page Size Extention = 0 (1)
00:00:01.055 18 - Reserved = 0 (0)
00:00:01.055 19 - Reserved = 0 (0)
00:00:01.055 NX - No-Execute Page Protection = 0 (0)
00:00:01.055 DS - Debug Store = 0 (0)
00:00:01.055 AXMMX - AMD Extensions to MMX Instr. = 0 (1)
00:00:01.055 MMX - Intel MMX Technology = 1 (1)
00:00:01.055 FXSR - FXSAVE and FXRSTOR Instructions = 1 (1)
00:00:01.055 ?? - AMD fast FXSAVE and FXRSTOR Instr.= 0 (0)
00:00:01.055 26 - Reserved = 0 (0)
00:00:01.055 27 - Reserved = 0 (0)
00:00:01.055 28 - Reserved = 0 (0)
00:00:01.055 ?? - AMD Long Mode = 0 (0)
00:00:01.055 ?? - AMD Extensions to 3DNow = 1 (1)
00:00:01.055 ?? - AMD 3DNow = 1 (1)
00:00:01.056 LahfSahf - LAHF/SAHF in 64-bit mode = 0 (0)
00:00:01.056 CmpLegacy - Core MP legacy mode (depr) = 0 (0)
00:00:01.056 SVM - AMD VM Extensions = 0 (0)
00:00:01.056 3 - Reserved = 0 (0)
00:00:01.056 AltMovCR8 - LOCK MOV CR0 means MOV CR8 = 0 (0)
00:00:01.056 31:5 - Reserved = 0x0 (0x0)
00:00:01.056 Full Name: AMD Athlon(tm) Processor
00:00:01.056
00:00:01.056 ******************** End of CPUID dump **********************
00:00:02.046 PIT (i8254) channel 0 status: irq=0x0
00:00:02.046 count=00010000 latched_count=0000 count_latched=00
00:00:02.046 status=00 status_latched=00 read_state=00
00:00:02.046 write_state=00 write_latch=00 rw_mode=00
00:00:02.046 mode=03 bcd=00 gate=01
00:00:02.046 count_load_time=0000000000000000 next_transition_time=0000000001a30c2c
00:00:02.046 u64ReloadTS=0000000000000000 u64NextTS=0000000001a30c2c
00:00:02.046 PIT (i8254) channel 1 status: irq=0x0
00:00:02.046 count=00010000 latched_count=0000 count_latched=00
00:00:02.046 status=00 status_latched=00 read_state=00
00:00:02.046 write_state=00 write_latch=00 rw_mode=00
00:00:02.046 mode=03 bcd=00 gate=01
00:00:02.046 count_load_time=0000000000000000 next_transition_time=0000000000000000
00:00:02.046 u64ReloadTS=0000000000000000 u64NextTS=0000000000000000
00:00:02.046 PIT (i8254) channel 2 status: irq=0x0
00:00:02.046 count=00010000 latched_count=0000 count_latched=00
00:00:02.046 status=00 status_latched=00 read_state=00
00:00:02.046 write_state=00 write_latch=00 rw_mode=00
00:00:02.046 mode=03 bcd=00 gate=00
00:00:02.046 count_load_time=0000000000000000 next_transition_time=0000000000000000
00:00:02.046 u64ReloadTS=0000000000000000 u64NextTS=0000000000000000
00:00:02.046 speaker_data_on=0x0 dummy_refresh_clock=0x0
00:00:02.108 PIIX3 ATA: LUN#0: disk, CHS=12483/16/63, total number of sectors 12582912
00:00:02.108 PIIX3 ATA: LUN#1: no unit
00:00:02.122 PIIX3 ATA: LUN#2: CD/DVD, total number of sectors 357323, passthrough disabled
00:00:02.122 PIIX3 ATA: LUN#3: no unit
00:00:02.221 Changing the VM state from 'CREATING' to 'CREATED'.
00:00:02.221 Changing the VM state from 'CREATED' to 'RUNNING'.
00:00:02.253 Guest Log: BIOS: VirtualBox 1.3.8 built Mar 13 2007 18:16:01
00:00:02.296 Display::handleDisplayResize(): pvVRAM=00000000 w=720 h=400 bpp=0 cbLine=0x0
00:00:02.346 Display::handleDisplayResize(): pvVRAM=100a0000 w=640 h=480 bpp=8 cbLine=0x280
00:00:04.291 PIIX3 ATA: Ctl#0: RESET, DevSel=0 AIOIf=0 CmdIf0=0x00 CmdIf1=0x00
00:00:04.296 Guest Log: BIOS: ata0-0: PCHS=12483/16/63 translation=lba LCHS=783/255/63
00:00:04.297 PIIX3 ATA: Ctl#1: RESET, DevSel=0 AIOIf=0 CmdIf0=0x00 CmdIf1=0x00
00:00:04.300 Guest Log: BIOS: Boot from Floppy 0 failed
00:00:04.303 Display::handleDisplayResize(): pvVRAM=00000000 w=720 h=400 bpp=0 cbLine=0x0
00:00:04.365 Guest Log: BIOS: Booting from Hard Disk...
00:00:04.568 Display::handleDisplayResize(): pvVRAM=100a0000 w=640 h=480 bpp=16 cbLine=0x500
00:00:58.384 Display::handleDisplayResize(): pvVRAM=00000000 w=720 h=400 bpp=0 cbLine=0x0
00:00:58.502 Guest Log: BIOS: int13_harddisk: function 15, unmapped device for ELDL=81
00:00:58.503 Guest Log: BIOS: KBD: unsupported int 16h function 03
00:00:58.515 Display::handleDisplayResize(): pvVRAM=100a0000 w=1024 h=768 bpp=32 cbLine=0x1000
00:00:58.576 Guest Log: BIOS: int13_harddisk: function 15, unmapped device for ELDL=81
00:00:58.577 Guest Log: BIOS: *** int 15h function AX=E980, BX=E6F5 not yet supported!
00:01:02.373 PATM: Disable block at c02ee7a0 - write c02ee7d6-c02ee7d7
00:01:07.114 PATM: Disable block at c03f546e - write c03f5491-c03f5495
00:01:07.116 PATM: Disable block at c03f740c - write c03f740c-c03f7410
00:01:07.118 PATM: Disable block at c03f9800 - write c03f9842-c03f9846
b4truth
Posts: 9
Joined: 22. May 2007, 18:13
Location: India, Auroville
Contact:

Post by b4truth »

How much RAM do you have? Ubuntu Feisty (because it a live CD) needs 512 MB RAM for the guest system only plus 265+ MB for your XP. Did you configure that?
Mito
Posts: 18
Joined: 24. May 2007, 23:15

Post by Mito »

I've tried to install the Ubuntu Server 7.04 using a Debian host, which doesn't boot as a LiveCD. It boots to the boot menu which allows for CD testing, install, Memtest, etc. When I boot to either the CD test or the Install, it says it loads the kernel, and then just sits there at at black screen indefinitely. I have it set to use only 256mb of ram, but that should be enough.

I'll try the memtest too, and I'll see what happens when I bump the ram to 512, but I don't think that will help. I'll post my results after I test some more.

Anyone have any ideas, or get it to work yet? I'm trying to install directly from the iso, and I've confirmed via the md5 sum that it didn't get corrupted in the download.

Thanks for any input!

Mito
b4truth
Posts: 9
Joined: 22. May 2007, 18:13
Location: India, Auroville
Contact:

Feisty and a long cup of tea ...

Post by b4truth »

Host Ubuntu 6.0.6 with 1 GB RAM, 512 MB dedicated to guest Ubuntu 7.0.4.
After no success with Ubuntu 7.0.4 live I installed the alternate CD. It took only 4 hours :shock: (Had a long cup of tea, a shower, a chat with my neigbour and walked the dog).
It went through without problems but it is quite slow. It needs 5 min to boot with 75% + CPU usage of the host machine. I installed Fedora 5 and CentOS on the same machine without problems.
What to do?
Something eats up the resources in Feisty and I can't figure out what it is ...
Mito
Posts: 18
Joined: 24. May 2007, 23:15

Post by Mito »

I did try to install it with 512mb ram and it didn't have any effect, it just sits there at a blank screen with a cursor in the top-left that I assume should be blinking, but isn't (this is installing 7.04 server, not desktop).

I also tried doing the memtest, and that boots into the test, but then the console window that I started the VM from gives a lot of errors etc and the VM locks up (probably because doing a Memtest within a VM is just stupid...).

Anyone know why Ubuntu would be having this problem?
Gargi
Posts: 19
Joined: 26. May 2007, 13:03

Post by Gargi »

Same here: Ubuntu 7 leads into a black screen after booting it. Looks like it have frozen.

cu
Gargi
trekfan1
Posts: 98
Joined: 13. May 2007, 07:22
Primary OS: MS Windows 10
VBox Version: PUEL
Guest OSses: Windows, Linux
Location: Italy

Post by trekfan1 »

tried to use a ubuntu alternate cd
Gargi
Posts: 19
Joined: 26. May 2007, 13:03

Post by Gargi »

No matter if desktop or alternate install: Both are leading in a black screen.
Mito
Posts: 18
Joined: 24. May 2007, 23:15

Post by Mito »

Ok, so here's my current status.

I installed Ubuntu using the alternate CD into a VirtualBox VM using my windows PC as the host, and it boots up perfectly there. I then transfered the vdi file to my debian box to host it. I boot it up and it does successfully boot to the boot menu, and then changes to the "Starting up..." screen, and just sits there.

If I change the boot menu to tell it to boot to recovery mode, it gets past the "Starting up..." prompt, and scrolls the screen a bunch, but then stops at:

Code: Select all

NET: Registered protocol family 8
NET: Registered protocol family 20
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.2
NET: Registered protocol family 2
Do note something that I forgot to mention before. This debian box is NOT an Intel or AMD processor, it's a Via C7 1.5Gz cpu.

I'm not sure if that would be what's causing my problem, or if it's that I'm hosting it on linux instead of windows (my windows box is a P4). But this VM boots fine in my windows host, but not here on this linux host.
Mito
Posts: 18
Joined: 24. May 2007, 23:15

Post by Mito »

Just a note to add to this.

Last night I found out that with a Debian Etch VM install, I get stopped at the same place. This time though, if I enable both ACPI and IO APIC that then it gets past the hangup.

This has only worked with Debian Etch sofar though. I tried the same trick with my Ububtu 7.04 VM and it didn't work. It did get it past the blinking cursor, but then it goes into a scrolling mania of errors followed by an eventual kernel panic.
Mito
Posts: 18
Joined: 24. May 2007, 23:15

Post by Mito »

Mito wrote:Just a note to add to this.

Last night I found out that with a Debian Etch VM install, I get stopped at the same place. This time though, if I enable both ACPI and IO APIC that then it gets past the hangup.

This has only worked with Debian Etch sofar though. I tried the same trick with my Ububtu 7.04 VM and it didn't work. It did get it past the blinking cursor, but then it goes into a scrolling mania of errors followed by an eventual kernel panic.
Bigger and Better development now!!!

When I told my cousin of last night's findings, he suggested I try passing some options to my Ubuntu kernel at boot, and it worked!!!

Passing noacpi noapic nolapic to the kernel at boot let it boot properly!
Gargi
Posts: 19
Joined: 26. May 2007, 13:03

Post by Gargi »

Very good! Thank you for that hint! I just installed vbox 1.4.0 on Etch and had the same issue again. Adding noacpi noapic nolapic helps!

cu
Gargi
razor1394
Posts: 3
Joined: 10. Jun 2007, 13:30
Contact:

Post by razor1394 »

It works badly for me with 1.4. The noacpi nolapic noapic options helped me install Ubuntu on the hard drive image but it keeps working very slowly. I manage to login but then it just sits there if I choose a standard Gnome session. Failsafe (terminal) seems to work. This is on a Sabayon 3.4 loop2 host.

edit: Seems non working audio was the culprit.
Last edited by razor1394 on 10. Jun 2007, 16:59, edited 1 time in total.
iKevin
Posts: 11
Joined: 13. May 2007, 02:42

Post by iKevin »

Well, I may as well post my experience with ubuntu 7.04. I got it installed using VB 1.4 with a Vista Host. Everything went very smoothly except for one thing. After setting up all of the partition table data, the ubuntu installer would come up with an error indicating that it couldn't make the swap partition. It happened several times.

My solution was to use my archlinux install CD to make the partitions, then boot ubuntu. It installed perfectly after that.

Kev
Post Reply