Hello,
Having the option of selecting the specific NIC in the "Host Interface" was a great option for me. I have more than one NIC and having different Guest selecting different NIC was a great thing when it was added. Now with 2.2.0, I am not able to select specific NIC's. Please bring back the selection of specific NIC's.
Why was "Host Interface" removed in 2.2?
-
- Volunteer
- Posts: 17798
- Joined: 17. Mar 2008, 13:41
- Primary OS: Debian other
- VBox Version: PUEL
- Guest OSses: Windows XP, Windows 7, Linux
- Location: /dev/random
Re: Why was "Host Interface" removed in 2.2?
It's not removed, it's renamed to Bridged. If you use Windows, repair the setup, that will bring the NIC choice back. A reboot might be needed after the repair.
Read the Forum Posting Guide before opening a topic.
VirtualBox FAQ: Check this before asking questions.
Online User Manual: A must read if you want to know what we're talking about.
Howto: Install Linux Guest Additions
Howto: Use Shared Folders on Linux Guest
See the Tutorials and FAQ section at the top of the Forum for more guides.
Try searching the forums first with Google and add the site filter for this forum.
E.g. install guest additions site:forums.virtualbox.org
Retired from this Forum since OSSO introduction.
VirtualBox FAQ: Check this before asking questions.
Online User Manual: A must read if you want to know what we're talking about.
Howto: Install Linux Guest Additions
Howto: Use Shared Folders on Linux Guest
See the Tutorials and FAQ section at the top of the Forum for more guides.
Try searching the forums first with Google and add the site filter for this forum.
E.g. install guest additions site:forums.virtualbox.org
Retired from this Forum since OSSO introduction.
-
- Posts: 3
- Joined: 13. Apr 2009, 15:55
- Primary OS: MS Windows XP
- VBox Version: OSE other
- Guest OSses: XP
Re: Why was "Host Interface" removed in 2.2?
Hello,
It is my understanding that once a NIC is assigned to a "Bridge", the NIC takes on the IP address of the Bridge. You can only assign one NIC to a Bridge. My NIC's are on different networks and that it what was so nice about selecting the specific NIC. If I have three NIC's, 192.168.3.x, 192.168.7.x, 193,145,12,x. How would I setup a "Bridge" for three guest to access the three NIC's?
It is my understanding that once a NIC is assigned to a "Bridge", the NIC takes on the IP address of the Bridge. You can only assign one NIC to a Bridge. My NIC's are on different networks and that it what was so nice about selecting the specific NIC. If I have three NIC's, 192.168.3.x, 192.168.7.x, 193,145,12,x. How would I setup a "Bridge" for three guest to access the three NIC's?
-
- Volunteer
- Posts: 17798
- Joined: 17. Mar 2008, 13:41
- Primary OS: Debian other
- VBox Version: PUEL
- Guest OSses: Windows XP, Windows 7, Linux
- Location: /dev/random
Re: Why was "Host Interface" removed in 2.2?
Please read the manual and check the settings. Your answer is there right in front of you. You just take a NIC to use, it's only called bridged, it doesn't create one.
Read the Forum Posting Guide before opening a topic.
VirtualBox FAQ: Check this before asking questions.
Online User Manual: A must read if you want to know what we're talking about.
Howto: Install Linux Guest Additions
Howto: Use Shared Folders on Linux Guest
See the Tutorials and FAQ section at the top of the Forum for more guides.
Try searching the forums first with Google and add the site filter for this forum.
E.g. install guest additions site:forums.virtualbox.org
Retired from this Forum since OSSO introduction.
VirtualBox FAQ: Check this before asking questions.
Online User Manual: A must read if you want to know what we're talking about.
Howto: Install Linux Guest Additions
Howto: Use Shared Folders on Linux Guest
See the Tutorials and FAQ section at the top of the Forum for more guides.
Try searching the forums first with Google and add the site filter for this forum.
E.g. install guest additions site:forums.virtualbox.org
Retired from this Forum since OSSO introduction.
-
- Posts: 2
- Joined: 15. Apr 2009, 11:41
- Primary OS: Fedora other
- VBox Version: OSE Fedora
- Guest OSses: Fedora 8, Windows XP
Re: Why was "Host Interface" removed in 2.2?
Hi,
I am a former 2.1.4 user (Fedora 8 host and guest), using Host Interface Networking. I read here that this networking mode was renamed "Bridged network". I selected this bridged networking mode in the 2.2 interface. However after the 2.2 upgrade, I get the following error popup at VM startup :
Failed to start the virtual machine Fedora 8.
Failed to open/create the internal network 'HostInterfaceNetworking-eth0' (VERR_SUPDRV_INTERFACE_NOT_SUPPORTED).
Unknown error creating VM (VERR_SUPDRV_INTERFACE_NOT_SUPPORTED).
Details :
Result Code:
NS_ERROR_FAILURE (0x80004005)
Component: Console
Interface: IConsole {9511bc54-15ee-4ddf-808e-472aba03809c}
This error popup seems cryptic to me. Does anyone understand where the problem lies?
I enclose the result of /sbin/ifconfig on the host :
br0 Link encap:Ethernet HWaddr 00:1C:C0:7C:9D:57
inet adr:192.168.10.60 Bcast:192.168.10.255 Masque:255.255.255.0
adr inet6: fe80::21c:c0ff:fe7c:9d57/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:363022 errors:0 dropped:0 overruns:0 frame:0
TX packets:279106 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:328230289 (313.0 MiB) TX bytes:46380629 (44.2 MiB)
eth0 Link encap:Ethernet HWaddr 00:1C:C0:7C:9D:57
inet adr:192.168.10.60 Bcast:192.168.10.255 Masque:255.255.255.0
adr inet6: fe80::21c:c0ff:fe7c:9d57/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:363049 errors:0 dropped:0 overruns:0 frame:0
TX packets:279125 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:333348708 (317.9 MiB) TX bytes:46481241 (44.3 MiB)
Interruption:17 Adresse de base:0x4000
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:9834 errors:0 dropped:0 overruns:0 frame:0
TX packets:9834 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:27773134 (26.4 MiB) TX bytes:27773134 (26.4 MiB)
Thanks,
Yuufo
I am a former 2.1.4 user (Fedora 8 host and guest), using Host Interface Networking. I read here that this networking mode was renamed "Bridged network". I selected this bridged networking mode in the 2.2 interface. However after the 2.2 upgrade, I get the following error popup at VM startup :
Failed to start the virtual machine Fedora 8.
Failed to open/create the internal network 'HostInterfaceNetworking-eth0' (VERR_SUPDRV_INTERFACE_NOT_SUPPORTED).
Unknown error creating VM (VERR_SUPDRV_INTERFACE_NOT_SUPPORTED).
Details :
Result Code:
NS_ERROR_FAILURE (0x80004005)
Component: Console
Interface: IConsole {9511bc54-15ee-4ddf-808e-472aba03809c}
This error popup seems cryptic to me. Does anyone understand where the problem lies?
I enclose the result of /sbin/ifconfig on the host :
br0 Link encap:Ethernet HWaddr 00:1C:C0:7C:9D:57
inet adr:192.168.10.60 Bcast:192.168.10.255 Masque:255.255.255.0
adr inet6: fe80::21c:c0ff:fe7c:9d57/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:363022 errors:0 dropped:0 overruns:0 frame:0
TX packets:279106 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:328230289 (313.0 MiB) TX bytes:46380629 (44.2 MiB)
eth0 Link encap:Ethernet HWaddr 00:1C:C0:7C:9D:57
inet adr:192.168.10.60 Bcast:192.168.10.255 Masque:255.255.255.0
adr inet6: fe80::21c:c0ff:fe7c:9d57/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:363049 errors:0 dropped:0 overruns:0 frame:0
TX packets:279125 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:333348708 (317.9 MiB) TX bytes:46481241 (44.3 MiB)
Interruption:17 Adresse de base:0x4000
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:9834 errors:0 dropped:0 overruns:0 frame:0
TX packets:9834 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:27773134 (26.4 MiB) TX bytes:27773134 (26.4 MiB)
Thanks,
Yuufo
-
- Oracle Corporation
- Posts: 3362
- Joined: 7. Jun 2007, 09:11
- Primary OS: Debian Sid
- VBox Version: PUEL
- Guest OSses: Linux, Windows
- Location: Dresden, Germany
- Contact:
Re: Why was "Host Interface" removed in 2.2?
Hmm, that error message usually means that the vboxnetflt module was not properly loaded. Please can you doYuufo wrote: Failed to start the virtual machine Fedora 8.
Failed to open/create the internal network 'HostInterfaceNetworking-eth0' (VERR_SUPDRV_INTERFACE_NOT_SUPPORTED).
Unknown error creating VM (VERR_SUPDRV_INTERFACE_NOT_SUPPORTED).
Yuufo
Code: Select all
lsmod|grep vbox
-
- Posts: 2
- Joined: 15. Apr 2009, 11:41
- Primary OS: Fedora other
- VBox Version: OSE Fedora
- Guest OSses: Fedora 8, Windows XP
Re: Why was "Host Interface" removed in 2.2?
Thanks for your reply.
However I previously removed / reinstalled VirtualBox and my bug is no longer here...
However I previously removed / reinstalled VirtualBox and my bug is no longer here...