Wie IP Adresse von der Fernsteuerung abändern?
Wie IP Adresse von der Fernsteuerung abändern?
Habe jetzt das Problem das ich mit Remotdesktop nicht auf meinen VM zugreifen Kann da 9000-9010 (127.0.0.1) anstatt 9000-9010 (192.168.1.48) wie es bei meinen anderen VMs üblich ist.Kann man das irgendwo abändern?
-
- Site Moderator
- Posts: 27329
- Joined: 22. Oct 2010, 11:03
- Primary OS: Mac OS X other
- VBox Version: PUEL
- Guest OSses: Win(*>98), Linux*, OSX>10.5
- Location: Greece
Re: Wie IP Adresse von der Fernsteuerung abändern?
With the VRDP server server enabled, you connect to the HOST, not the guest, to the port that you have defined in the VM Settings » Display » Enable Server: checked, Server Port: 3389.[color=#BF6000]DeepL translator[/color] wrote:I now have the problem that I can't access my VM with RemoteDesktop. Can 9000-9010 (127.0.0.1) instead of 9000-9010 (192.168.1.48) as it is with my other VMs. Can I change that somewhere?
I don't know where 9000-9010, 127.0.0.1 or 192.168.1.48 came from...
Do NOT send me Personal Messages (PMs) for troubleshooting, they are simply deleted.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Re: Wie IP Adresse von der Fernsteuerung abändern?
Laut Manpage:
Die IP von meinem host system ist 192.168.1.48 aber wieso werden an den neuangelegten Gastsysteme die 127.0.0.1 vergeben? Mit 127.0.0.1 kan ich nicht über rdp von einem anderen Rechner zugreufen und Steuern.
Code: Select all
Since VRDP is backwards-compatible to RDP, you can use any standard RDP viewer to connect to such a remote virtual machine.
For this to work, you must specify the IP address of your host system, not of the virtual machine, as the server address to connect to.
You must also specify the port number that the VRDP server is using.
Code: Select all
root@HP-Server ~ > ifconfig
em1 Link encap:Ethernet Hardware Adresse a0:1d:48:c7:cb:8c
inet Adresse:192.168.1.48 Bcast:192.168.1.255 Maske:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1
RX-Pakete:8436096 Fehler:0 Verloren:64420 Überläufe:0 Fenster:0
TX-Pakete:5237956 Fehler:0 Verloren:0 Überläufe:0 Träger:0
Kollisionen:0 Sendewarteschlangenlänge:1000
RX-Bytes:10183377531 (10.1 GB) TX-Bytes:2225545800 (2.2 GB)
Interrupt:16
lo Link encap:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metrik:1
RX-Pakete:244075 Fehler:0 Verloren:0 Überläufe:0 Fenster:0
TX-Pakete:244075 Fehler:0 Verloren:0 Überläufe:0 Träger:0
Kollisionen:0 Sendewarteschlangenlänge:1
RX-Bytes:108464615 (108.4 MB) TX-Bytes:108464615 (108.4 MB)
- Attachments
-
- Port für Fernsteuerung 9000 - 9100 (127.0.0.1)
- testvirtualbox.JPG (87.38 KiB) Viewed 1347 times
-
- Port für Fernsteuerung 9000 - 9100 (192.168.1.48)
- bionic virtualbox.JPG (72.9 KiB) Viewed 1347 times