Welcher Grafikcontroller für welches Gast-System?

Allgemeine Diskussionen über den Einsatz von VirtualBox.
Post Reply
Hanisch
Posts: 26
Joined: 8. Apr 2011, 13:11
Primary OS: Linux other
VBox Version: OSE other
Guest OSses: Gentoo

Welcher Grafikcontroller für welches Gast-System?

Post by Hanisch »

Hallo,

mit VirtualBox 6.0.0 gibt es eine Auswahl des Grafikcontrollers jeweils mit oder ohne 3D-Beschleunigung.

Code: Select all

Grafikcontroller:         keine                     <=== Wann und wozu wird das benötigt?
                          VBoxVGA                   <=== Das ist wohl die alte Grafik-Simulation?
                          VMSVGA                    <=== Wann und wozu wird das benutzt?
                          VBoxSVGA                  <=== Wann und wozu wird das benutzt?
Wer kennt sich damit aus?

Muß man nun jede Kombination aus Grafikcontroller mit/ohne 3D-Beschleunigung nach der "trial and error" Methode und dem jeweiligen Gast-System ausprobieren?

Gruß
Ch. Hanisch
Ernst Lage
Posts: 2
Joined: 30. Dec 2018, 13:36
Primary OS: MS Windows other
VBox Version: PUEL
Guest OSses: Lx Mint, Lx Debian, Win 7

Re: Welcher Grafikcontroller für welches Gast-System?

Post by Ernst Lage »

User Manual Seite 61-62
Hanisch
Posts: 26
Joined: 8. Apr 2011, 13:11
Primary OS: Linux other
VBox Version: OSE other
Guest OSses: Gentoo

Re: Welcher Grafikcontroller für welches Gast-System?

Post by Hanisch »

Hallo,
Ernst Lage wrote:User Manual Seite 61-62
Sorry, da finde ich nichts über die Grafikcontroller.
Unter "3.6.1 Screen Tab" S. 50-51 steht etwas, was mir aber eigentlich nicht weiter hilft.


Gruß
Ch. Hanisch
towo2099
Volunteer
Posts: 362
Joined: 18. Aug 2014, 21:53
Primary OS: Debian Sid
VBox Version: PUEL
Guest OSses: Android, Linux

Re: Welcher Grafikcontroller für welches Gast-System?

Post by towo2099 »

Hanisch wrote:Hallo,
Ernst Lage wrote:User Manual Seite 61-62
Sorry, da finde ich nichts über die Grafikcontroller.
Unter "3.6.1 Screen Tab" S. 50-51 steht etwas, was mir aber eigentlich nicht weiter hilft.


Gruß
Ch. Hanisch
Ich würde mal die Augen auf machen!
https://www.virtualbox.org/manual/ch03. ... ngs-screen
Graphics Controller: Specifies the graphics adapter type used by the VM. The following options are available:

VBoxSVGA: The default graphics controller for new VMs that use Linux or Windows 7 or later. Requires the Guest Additions.

VBoxVGA: Used for legacy guest operating systems. This was the default graphics controller in previous releases.

For Windows versions before Windows 7, this is the default option. Does not require the Guest Additions.

VMSVGA: Used to emulate a VMware SVGA graphic device. Requires the Guest Additions.

None: Do not emulate a graphics adapter type.
Es ist wirlich in jedem Forum das Gleiche mit Dir!
Ernst Lage
Posts: 2
Joined: 30. Dec 2018, 13:36
Primary OS: MS Windows other
VBox Version: PUEL
Guest OSses: Lx Mint, Lx Debian, Win 7

Re: Welcher Grafikcontroller für welches Gast-System?

Post by Ernst Lage »

Sorry, liegt an der Seitennummerierung des Manuals. Auf Seite 50-51 findest Du die Infos. Ich weiß auch nicht, warum die Seitenbeschriftung ab Blatt 11 wieder bei 1 anfängt - aber, Du hättest in dem Dokument ja auch mal z.B. nach "vboxsvga" suchen können.
Hanisch
Posts: 26
Joined: 8. Apr 2011, 13:11
Primary OS: Linux other
VBox Version: OSE other
Guest OSses: Gentoo

Re: Welcher Grafikcontroller für welches Gast-System?

Post by Hanisch »

Hallo,
Graphics Controller: Specifies the graphics adapter type used by the VM. The following options are available:

VBoxSVGA: The default graphics controller for new VMs that use Linux or Windows 7 or later. Requires the Guest Additions.

VBoxVGA: Used for legacy guest operating systems. This was the default graphics controller in previous releases.

For Windows versions before Windows 7, this is the default option. Does not require the Guest Additions.

VMSVGA: Used to emulate a VMware SVGA graphic device. Requires the Guest Additions.

None: Do not emulate a graphics adapter type.
Natürlich habe ich das gelesen, aber mein Frage, ob man das nun jedesmal ausprobieren muß, welcher Grafikcontroller nun für welches Gast-System läuft, ist damit nicht beantwortet.

So läuft z.B. KDE-Plasma bei Grafikcontroller: VBoxVGA nur ohne 3D-Beschleunigung und andere Oberflächen benötigen hingegen wieder 3D-Beschleunigung.
Meist ist Grafikcontroller: VBoxVGA das Mittel der Wahl.
KDE-Plasma funktioniert hingegen mit 3D-Beschleunigung und Grafikcontroller: VMSVGA.

Gruß
Ch. Hanisch
Post Reply