Windows 10 Hosts
Re: Windows 10 Hosts
Well, now the lost bridged network connection happened with normally applied shutdowns.
The fix was uninstall 5.0.8 then reinstall. Reinstall extension pack.
Shorter procedure than before.
There is definitely something going on with shutdown and restart.
Guest: Windows Server 2012
The fix was uninstall 5.0.8 then reinstall. Reinstall extension pack.
Shorter procedure than before.
There is definitely something going on with shutdown and restart.
Guest: Windows Server 2012
Re: Windows 10 Hosts
I have a similar problem with W10-Host.
VM (W7 32) runs well and I can access all drives in my network but only without the shared host drives of my W10 system and vice versa.
I use a network bridge on a Intel1000 desktop adapter.
What do I wrong?
VM (W7 32) runs well and I can access all drives in my network but only without the shared host drives of my W10 system and vice versa.
I use a network bridge on a Intel1000 desktop adapter.
What do I wrong?
Re: Windows 10 Hosts
With the new Version 5.0.8 everything is OK!
Re: Windows 10 Hosts
Hi I'm using windows10 insider build 10586 x64 and I have error like this.
Is there any way to use vb??
Is there any way to use vb??
- Attachments
-
- VBoxHardening.log
- log
- (16.38 KiB) Downloaded 203 times
-
- Posts: 6
- Joined: 21. Sep 2013, 11:39
- Primary OS: MS Windows 7
- VBox Version: PUEL
- Guest OSses: Win 7-10
- Location: Sydney, AUS
Re: Windows 10 Hosts
The latest Windows Update on Win 10 installed the latest build (1511 (OS Build 10586.3)). It very thoughtfully turned on Hyper-V so I got errors complaining about no VT-X. Here are the batch files I found around here somewhere that I use to toggle this setting...
Hope this saves you some swearing. Note, you need to run the batch file as Admin or it won't work.
Code: Select all
VT-x is not available (VERR_VMX_NO_VMX).
Result Code:
E_FAIL (0x80004005)
Component:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
Code: Select all
title Disabling Hyper-V on the next reboot so VirtualBox can run
echo off
cls
echo Disabling Hyper-V on the next reboot so VirtualBox can run
pause
bcdedit /set hypervisorlaunchtype off
echo .
bcdedit
echo.
echo R E B O O T to turn off Hyper V
pause
Code: Select all
title Enabling Hyper-V on the next reboot. VirtualBox will NOT run
echo off
cls
echo Enabling Hyper-V on the next reboot. VirtualBox will NOT run
pause
bcdedit /set hypervisorlaunchtype auto
echo .
bcdedit
echo.
echo R E B O O T to turn on Hyper V
pause
Re: Windows 10 Hosts
5.08.10 VirtualBox on Windows 10 Pro x64 Host (Windows 10 update that just came out).
VB update seems to have fixed all of my issues... Bridged networking, memory errors when running apps in XP, etc.
Thank you developers.
VB update seems to have fixed all of my issues... Bridged networking, memory errors when running apps in XP, etc.
Thank you developers.
-
- Posts: 2
- Joined: 14. Nov 2015, 21:07
Re: Windows 10 Hosts
For me, the new Windows 10 (build 1511) has broken host-only networking. Host-only networking always fails, both with 5.0.10 and 5.0.8.
Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter #2' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).
Result Code:
E_FAIL (0x80004005)
Component:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
I have removed and recreated the virtual host ethernet adapter probably half-a-dozen times. I always get this message.
Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter #2' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).
Result Code:
E_FAIL (0x80004005)
Component:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
I have removed and recreated the virtual host ethernet adapter probably half-a-dozen times. I always get this message.
-
- Posts: 1
- Joined: 14. Nov 2015, 23:20
- Primary OS: MS Windows other
- VBox Version: OSE other
- Guest OSses: Linux
- Contact:
Re: Windows 10 Hosts
I had this problem after update. After re-installing VB I switched on "VirtualBox NDIS6 Bridged Networking Driver" in properties network connection.David Miller wrote:For me, the new Windows 10 (build 1511) has broken host-only networking. Host-only networking always fails, both with 5.0.10 and 5.0.8.
Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter #2' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).
Result Code:
E_FAIL (0x80004005)
Component:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
I have removed and recreated the virtual host ethernet adapter probably half-a-dozen times. I always get this message.
It property switched off default in my case.
- Attachments
-
- Screenshot
- 2015-11-15 01-26-30 VirtualBox Host-Only Network Properties.png (44.97 KiB) Viewed 85925 times
-
- Posts: 2
- Joined: 14. Nov 2015, 21:07
Re: Windows 10 Hosts
Hey, this worked great! Thank you very much.oolleegg55 wrote:I had this problem after update. After re-installing VB I switched on "VirtualBox NDIS6 Bridged Networking Driver" in properties network connection.David Miller wrote:For me, the new Windows 10 (build 1511) has broken host-only networking. Host-only networking always fails, both with 5.0.10 and 5.0.8.
Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter #2' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).
Result Code:
E_FAIL (0x80004005)
Component:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
I have removed and recreated the virtual host ethernet adapter probably half-a-dozen times. I always get this message.
It property switched off default in my case.
Re: Windows 10 Hosts
The recent Windows 10 update caused Virtualbox to not open at all for me. I've had Windows 10 for a while now and I've been using Virtualbox just fine until today (the update happened overnight last night). I don't have a system restore point to before the update and I don't want to lose all the work I have in my images so I don't want to reinstall. I checked the BIOS and virtualization technology is enabled.
Any suggestions that I could try?
Any suggestions that I could try?
Re: Windows 10 Hosts
In a lot of cases for me just uninstalling then reinstalling VBox and extension pack fixed the problems.
Hope this helps, Caesar.
Hope this helps, Caesar.
Re: Windows 10 Hosts
In my case Windwos update 1511 caused this issue and reinstalling vbox didn't helped. After fixing it manually as described here my image worked again.
-
- Posts: 1
- Joined: 19. Nov 2015, 05:54
Re: Windows 10 Hosts
You saved my life! Thank you very much!! This works for me also (Android Genymotion windows 10)oolleegg55 wrote:I had this problem after update. After re-installing VB I switched on "VirtualBox NDIS6 Bridged Networking Driver" in properties network connection.David Miller wrote:For me, the new Windows 10 (build 1511) has broken host-only networking. Host-only networking always fails, both with 5.0.10 and 5.0.8.
Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter #2' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).
Result Code:
E_FAIL (0x80004005)
Component:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
I have removed and recreated the virtual host ethernet adapter probably half-a-dozen times. I always get this message.
It property switched off default in my case.
Re: Windows 10 Hosts
this works for meoolleegg55 wrote:I had this problem after update. After re-installing VB I switched on "VirtualBox NDIS6 Bridged Networking Driver" in properties network connection.David Miller wrote:For me, the new Windows 10 (build 1511) has broken host-only networking. Host-only networking always fails, both with 5.0.10 and 5.0.8.
Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter #2' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).
Result Code:
E_FAIL (0x80004005)
Component:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
I have removed and recreated the virtual host ethernet adapter probably half-a-dozen times. I always get this message.
It property switched off default in my case.
Re: Windows 10 Hosts
I have the same problem as Tux83Tux83 wrote:I was having issues too with bridged NICs on Windows 10. All was fine with Windows 8.1. I now found a workaround:
In total I'm having 5 NICs connected to my PC. The ones I use for my VMs are more or less dedicated to certain Oracle VB VMs. So in order to not interfere with my main NIC (e.g. default gw) I disabled all components in the bridged VM NICs on the Windows 10 host, with the exception of "VirtualBox NDIS6 Bridged Network Driver". However, with this setup I don't see that NIC in the VM settings. I can't select it to bridge. However, when I activate the IPv6 protocol on that NICs I can select the adapter in the VM settings and everything works just fine. As there's no IPv6 active in those test VLANs it's also not interfering with my main adapter.
N'joy.
I'm running VirtualBox on 2 servers with windows 10 as hosts OS.
- Server No.1 has been in use for a while now. Don't think it has al the latest windows updates installed.
- Server No.2 is a fresh installation with no windows updates installed (currently I only have 4G internet on that location with a limited data bundle)
- Each server has 3 network interfaces and 2 of them are connected to unsafe networks that should only be accessible by the virtual machine assigned to that interface.
- For security reasons and to prevent interference I also disabled all network components on the unsafe interfaces (except the virtualbox NDIS 6).
- In virtualbox I only use the bridged adapter mode for the interfaces.
On server no.1 I'm still running virtualbox version 5.0.0. Here I can select al interfaces as target for the bridge. Even with all the unnecessary components disabled.
On server no.2 I'm running version 5.0.10. If I disable all unnecessary components the interfaces don't appear until I enable the internet protocol v4 OR v6 option.
Is this a bug? Or is this by design?