I updated to Yosemite recently and since then I'm not able to run my VirtualBox Windows 7 machine. Windows starts booting and after 3-4 seconds the machine closes and VirtualBox says it’s aborted. I use VirtualBox 4.3.18.
VM settings:
Code: Select all
Name: Windows 7
Groups: /
Guest OS: Windows 7 (32 bit)
UUID: 98887ce9-99f8-4153-ab9b-a6ce3f992303
Config file: /Users/piotrmierzejewski/VirtualBox VMs/Windows 7/Windows 7.vbox
Snapshot folder: /Users/piotrmierzejewski/VirtualBox VMs/Windows 7/Snapshots
Log folder: /Users/piotrmierzejewski/VirtualBox VMs/Windows 7/Logs
Hardware UUID: 98887ce9-99f8-4153-ab9b-a6ce3f992303
Memory size: 2048MB
Page Fusion: off
VRAM size: 49MB
CPU exec cap: 100%
HPET: off
Chipset: piix3
Firmware: BIOS
Number of CPUs: 1
PAE: off
Long Mode: on
Synthetic CPU: off
CPUID overrides: None
Boot menu mode: message and menu
Boot Device (1): Floppy
Boot Device (2): DVD
Boot Device (3): HardDisk
Boot Device (4): Not Assigned
ACPI: on
IOAPIC: off
Time offset: 0ms
RTC: local time
Hardw. virt.ext: on
Nested Paging: on
Large Pages: on
VT-x VPID: on
VT-x unr. exec.: on
State: aborted (since 2014-10-20T17:58:46.144000000)
Monitor count: 1
3D Acceleration: off
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: off
Allow Tracing to Access VM: off
Tracing Configuration:
Autostart Enabled: off
Autostart Delay: 0
Default Frontend:
Storage Controller Name (0): IDE Controller
Storage Controller Type (0): PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 2
Storage Controller Port Count (0): 2
Storage Controller Bootable (0): on
Storage Controller Name (1): SATA Controller
Storage Controller Type (1): IntelAhci
Storage Controller Instance Number (1): 0
Storage Controller Max Port Count (1): 30
Storage Controller Port Count (1): 1
Storage Controller Bootable (1): on
IDE Controller (1, 0): Empty
SATA Controller (0, 0): /Users/piotrmierzejewski/VirtualBox VMs/Windows 7/Windows 7.vdi (UUID: e24173aa-c11c-4ef1-9469-24bf90803b13)
NIC 1: MAC: 08002735CB56, Attachment: NAT, Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 1 Settings: MTU: 0, Socket (send: 64, receive: 64), TCP Window (send:64, receive: 64)
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: USB Tablet
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
LPT 1: disabled
LPT 2: disabled
Audio: enabled (Driver: CoreAudio, Controller: HDA)
Clipboard Mode: Bidirectional
Drag'n'drop Mode: disabled
VRDE: disabled
USB: enabled
EHCI: enabled
USB Device Filters:
<none>
Available remote USB devices:
<none>
Currently Attached USB Devices:
<none>
Bandwidth groups: <none>
Shared folders:
Name: 'temp2', Host path: '/Users/piotrmierzejewski/temp2' (machine mapping), writable
Name: 'Studia', Host path: '/Users/piotrmierzejewski/Studia' (machine mapping), writable
Name: 'Fizyka', Host path: '/Users/piotrmierzejewski/Dropbox/Fizyka' (machine mapping), writable
VRDE Connection: not active
Clients so far: 0
Video capturing: not active
Capture screens: 0
Capture file: /Users/piotrmierzejewski/VirtualBox VMs/Windows 7/Windows 7.webm
Capture dimensions: 1024x768
Capture rate: 512 kbps
Capture FPS: 25
Guest:
Configured memory balloon size: 0 MB
The same happens with VT-x disabled. Windows XP guest works just fine.
Do you have any clues what might be the problem? I'd really appreciate it.
Thanks.