I had 4.3.12 installed install on Windows 7 Enterprise with McAfee installed and did the upgrade to 4.3.14. Started a VM with no errors. Did the same on Windows 8.1 Pro with Avira installed and it failed. On the Windows 8.1 I have removed all anti-virus uninstalled VirtualBox re-installed and still it fails. Next is to find a machine I can test a fresh install of Windows 8.1.Anunes wrote:What you mean with "upgrade"? Did you simple overwrite the previous Version of 4.3.14? Or, as me, did first uninstall the previous version and install the new?djk wrote:.... and 4.3.14 upgrade worked.
4.3.14 conflicts with anti-virus packages.
Re: 4.3.14 conflicts with anti-virus packages.
Re: 4.3.14 conflicts with anti-virus packages.
Hi, I have problems too after upgrading to 4.3.14, when I try to launch VB an error message appears:
VirtualBox.exe - Bad Image
---------------------------
c:\progra~1\agnitum\outpos~1\wl_hoo~1.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
I use Windows 8.1 and Outpost Security Suite as security software.
free image hosting
VirtualBox.exe - Bad Image
---------------------------
c:\progra~1\agnitum\outpos~1\wl_hoo~1.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
I use Windows 8.1 and Outpost Security Suite as security software.
free image hosting
Re: 4.3.14 conflicts with anti-virus packages.
I installed 4.3.14 95030 on Windows 8 with McAffee antivirus (Agent version 4.6.0.3262; VirusScan Enterprise version 8.8.0). I can't start the VMWare executable. When I attempt do do so I get a message that says "VirtualBox - Error in supR3HardenedWinVerifyProcess: Failed to to verify process integrity". Screenshot attached.
- Attachments
-
- VirtualBoxError.png (18.43 KiB) Viewed 9974 times
-
- Posts: 51
- Joined: 12. Apr 2013, 22:06
- Primary OS: MS Windows 8
- VBox Version: PUEL
- Guest OSses: Linux, assorted; Windows 7; Windows 8.1
Re: 4.3.14 conflicts with anti-virus packages.
That's weird. Why are you using VMWare stuff with VirtualBox? They are different products.
Re: 4.3.14 conflicts with anti-virus packages.
Same problem with:
Windows 7 Professional SP1 (fresh installation)
AVG Antivirus (default settings)
Comodo Firewall (default settings)
Virtualbox doesn't event start.
Windows 7 Professional SP1 (fresh installation)
AVG Antivirus (default settings)
Comodo Firewall (default settings)
Virtualbox doesn't event start.
Re: 4.3.14 conflicts with anti-virus packages.
I'm getting the same problem on Windows 8.1 with VirtualBox-4.3.14-95030-Win and xubuntu-14.04-desktop-amd64.iso. I'm running AVG Anti-Virus. However, it also fails with AVG disabled.
Re: 4.3.14 conflicts with anti-virus packages.
Host OS: Windows 7 Enterprise 64-bit
TREND MICRO OfficeScan Client for Windows
TREND MICRO OfficeScan Client for Windows
- Attachments
-
- ErrorMessaages.png (41.09 KiB) Viewed 9819 times
Last edited by vyou on 6. Sep 2014, 16:03, edited 1 time in total.
Re: Error in supR3HardenedWinReSpawn
With Antivirus and Firewall disabled, attempted to repair VB install: Then attempted to remove VB, and reinstall from clean download, still with AV disabled, now I'm back to not getting into the program: This is so darn frustrating.gregz83 wrote:07/15/2014:
Cannot start Virtual Box.
Host OS: Windows 7 Pro 64-bit.
Guest OS: Windows 8.1 Pro 64-bit. 07/18/2014:
Disabled Avast Antivirus shields. Virtual Box now starts, however still cannot start VM's. Will attempt to reinstall Virtual Box and restart VM's with Avast disabled.
Re: 4.3.14 conflicts with anti-virus packages.
Host - Windows 7 Home Premium
AV - Avast
Got the "Failed to install NtCreateSection monitor ..." message on firing up VB GUI.
What does not seem to have been mentioned by anyone else is that I then found that VirtualBox-4.3.14-95030-Win.exe
had been deleted from my download directory.
Assuming I had accidentally deleted it (although it wasn't in the Trash) I downloaded a fresh copy, repeated the install and again the exec file had gone. Would Avast have done that?
AV - Avast
Got the "Failed to install NtCreateSection monitor ..." message on firing up VB GUI.
What does not seem to have been mentioned by anyone else is that I then found that VirtualBox-4.3.14-95030-Win.exe
had been deleted from my download directory.
Assuming I had accidentally deleted it (although it wasn't in the Trash) I downloaded a fresh copy, repeated the install and again the exec file had gone. Would Avast have done that?
-
- Posts: 45
- Joined: 21. Jul 2011, 17:27
- Primary OS: MS Windows 7
- VBox Version: PUEL
- Guest OSses: WXP Pro 32Bit
- Location: virtualized
Re: 4.3.14 conflicts with anti-virus packages.
I don't have installed any antivirus software. But still i get some errors, 'Fehler in Anwendung' which looks like a general protection fault and 'exit code 1'. My host is in a separate subnet different to that of the router. Only one of my VMs has access to the router and the internet. There's no such thing as drive by downloads on my host because of this, therefore no antivirus is installed. Because of this setup it is absolutely no problem that my host has installed XP. So have no fear of my using XP.
Antivirus software making problems is not the whole story. Directly after booting the host VBox gets the errors but after some minutes all VMs do work and are booting just fine. Why is that? Errors always occur before a VM even boots.
There is no such thing as a conflict with anti-virus packages on my host. There is no other virtualisation/sandboxing software installed beside VirtualBox.
Antivirus software making problems is not the whole story. Directly after booting the host VBox gets the errors but after some minutes all VMs do work and are booting just fine. Why is that? Errors always occur before a VM even boots.
There is no such thing as a conflict with anti-virus packages on my host. There is no other virtualisation/sandboxing software installed beside VirtualBox.
Do you mean a malicious user inside of a vm?As of version 4.3.14, VirtualBox for Windows has hardened security to eliminate a possible exploit that could allow malicious user/s to have access to your system.
- Attachments
-
- VBox 4.3.14 error.zip
- (90.62 KiB) Downloaded 64 times
-
- Fehler in Anwendung.png (79.79 KiB) Viewed 9702 times
-
- Exit code 1.png (83.84 KiB) Viewed 9702 times
Host: Windows 7 32Bit
Guest: Windows XP Pro 32Bit
CPU: Core 2 Duo T7700 @ 2.4GHz
Guest: Windows XP Pro 32Bit
CPU: Core 2 Duo T7700 @ 2.4GHz
-
- Site Moderator
- Posts: 39134
- Joined: 4. Sep 2008, 17:09
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Mostly XP
Re: 4.3.14 conflicts with anti-virus packages.
Please don't muddy the waters. No speculation is needed here - the devs know exactly what code changes they made for this minor update, and the affect they expected it to have - hence I assume the unusual step of beta testing a minor update. There is no mystery here, except that so many AV packages use this suspect DLL injection trick, and why so few AV users participated in the beta!djk wrote:Continue to wonder if the anti-virus is the issue.
Re: 4.3.14 conflicts with anti-virus packages.
I don't have any AV installed
My Host system is:
Windows 7 64bit
16GB de ram
Core i5 4430 (Vt-x enabled in bios)
My Host system is:
Windows 7 64bit
16GB de ram
Core i5 4430 (Vt-x enabled in bios)
- Attachments
-
- vbox.JPG (79.11 KiB) Viewed 9675 times
-
- Posts: 32
- Joined: 4. Sep 2008, 16:02
- Primary OS: MS Windows other
- VBox Version: PUEL
- Guest OSses: Linux, Windows, DragonFlyBSD, FreeBSD, NetBSD, OpenBSD
- Location: Poland
Re: 4.3.14 conflicts with anti-virus packages.
For the sake of completeness within this thread, I'll post my case too.
Trying to run VB gives me following dialog box with Abort button:
VirtualBox - Error In supR3HardenedWinInstallHooks
Failed to install NtCreateSection monitor: ff 25 e0 e8 5e 9 0 0 f 5 c3 f 1f 44 0 0
(rc=-8)
ThinkPad T430
Windows 7 Pro SP1 x64
Comodo Firewall 7.0.317799.4142
(Auto-Sandbox and HIPS already disabled, but disabling Firewall didn't help)
Trying to run VB gives me following dialog box with Abort button:
VirtualBox - Error In supR3HardenedWinInstallHooks
Failed to install NtCreateSection monitor: ff 25 e0 e8 5e 9 0 0 f 5 c3 f 1f 44 0 0
(rc=-8)
ThinkPad T430
Windows 7 Pro SP1 x64
Comodo Firewall 7.0.317799.4142
(Auto-Sandbox and HIPS already disabled, but disabling Firewall didn't help)
Desktop: NUC11PHKi7C [Core i7-1165G7 @ 2.80GHz, DDR4-3200 32GB RAM, GeForce RTX 2060, M.2 NVMe SSD 2TB] | 32UN880-B
Laptop: ThinkPad T430 (2344-56G) [Core i7 3520M @ 2.9GHz, DDR3-1600 8GB RAM, NVS 5400M, SATA3 SSD 512GB]
Laptop: ThinkPad T430 (2344-56G) [Core i7 3520M @ 2.9GHz, DDR3-1600 8GB RAM, NVS 5400M, SATA3 SSD 512GB]
Re: 4.3.14 conflicts with anti-virus packages.
My laptop computer is Lenovo Y460N, which has a Nvidia GT425m video card, Core i3 M370 cpu(with a Intel Graphic Card inside), and Win 7 64bit Operating System.
My Anti-Virus software is Eset Smart Security 5. Screenshot: My installed version is VirtualBox-4.3.14-95030-Win.
Either when I upgraded from 4.3.12 without uninstallation or I uninstalled the previous one and installed 4.3.14 freshly, the same problem occurred:
When I double click the shortcut, this error occurred: I clicked "OK", this error popped out again.
And I clicked "OK" the second time, another error occured: That's all.
My Anti-Virus software is Eset Smart Security 5. Screenshot: My installed version is VirtualBox-4.3.14-95030-Win.
Either when I upgraded from 4.3.12 without uninstallation or I uninstalled the previous one and installed 4.3.14 freshly, the same problem occurred:
When I double click the shortcut, this error occurred: I clicked "OK", this error popped out again.
And I clicked "OK" the second time, another error occured: That's all.
Last edited by Cu on 19. Jul 2014, 16:06, edited 2 times in total.
Re: 4.3.14 conflicts with anti-virus packages.
problem with vb4.3.14,,,
Could it be better to test before release ??
so many problems.
Could it be better to test before release ??
so many problems.
- Attachments
-
- problem with vb4.3.14
- problem with vb4.3.14-20140719205448.jpg (87.79 KiB) Viewed 9636 times