virtualbox for openSUSE 11.2
-
- Posts: 7
- Joined: 12. Nov 2009, 10:12
- Primary OS: openSUSE
- VBox Version: PUEL
- Guest OSses: Windows 2000
virtualbox for openSUSE 11.2
Hi everybody
I just installed openSUSE 11.2 x86_64 (GM).
Now I couldn't find the virtualbox version for openSUSE 11.2.
When will the virtualbox for openSUSE 11.2 x86_64 be available?
What is recommended to be used with openSUSE 11.2 before this release is available?
Thanks in advance for your advice.
Greetings from Switzerland,
Rolf
I just installed openSUSE 11.2 x86_64 (GM).
Now I couldn't find the virtualbox version for openSUSE 11.2.
When will the virtualbox for openSUSE 11.2 x86_64 be available?
What is recommended to be used with openSUSE 11.2 before this release is available?
Thanks in advance for your advice.
Greetings from Switzerland,
Rolf
Re: virtualbox for openSUSE 11.2
I'll also have to postpone the installation of openSUSE 11.2 till there is a VirtualBox rpm for it.
Please, create a rpm for the new version of openSUSE.
Thanks!!!
Please, create a rpm for the new version of openSUSE.
Thanks!!!
-
- Volunteer
- Posts: 2560
- Joined: 30. May 2007, 18:05
- Primary OS: Fedora other
- VBox Version: PUEL
- Guest OSses: XP, Win7, Win10, Linux, OS/2
Re: virtualbox for openSUSE 11.2
Did you try the rpm for 11.1? If yes, did you get any errors?
-
- Volunteer
- Posts: 7639
- Joined: 7. Jun 2007, 21:53
Re: virtualbox for openSUSE 11.2
The Version for 11.1 works properly on my 2 machines.
German Howto (Linux): http://www.linuxforen.de/forums/showthread.php?t=236444
User Manual / Download Section: http://www.virtualbox.de/wiki/Downloads
FAQ: http://www.virtualbox.de/wiki/User_FAQ http://forums.virtualbox.org/viewtopic.php?t=8669
User Manual / Download Section: http://www.virtualbox.de/wiki/Downloads
FAQ: http://www.virtualbox.de/wiki/User_FAQ http://forums.virtualbox.org/viewtopic.php?t=8669
-
- Posts: 25
- Joined: 5. Nov 2008, 10:52
- Primary OS: openSUSE
- VBox Version: PUEL
- Guest OSses: win xp, various Linuxes, openSolaris
Re: virtualbox for openSUSE 11.2
But anyway version for 11.2 would be better.
I'm waiting patiently.
I'm waiting patiently.
Re: virtualbox for openSUSE 11.2
I'm not able to use VBox on 11.2 either. Getting kernel driver issues. Can not use /etc/init.d/vboxdrv setup to recompile driver.
/var/log/vbox-install.log shows the following:
Makefile:150: Warning: using /usr/src/linux as the source directory of your Linux kernel. If this is not correct, specify KERN_DIR=<directory> and run Make again.
make KBUILD_VERBOSE=1 -C /usr/src/linux SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 modules
test -e include/linux/autoconf.h -a -e include/config/auto.conf || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/linux/autoconf.h or include/config/auto.conf are missing."; \
echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo; \
/bin/false)
ERROR: Kernel configuration is invalid.
include/linux/autoconf.h or include/config/auto.conf are missing.
Run 'make oldconfig && make prepare' on kernel src to fix it.
mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/*
WARNING: Symbol version dump /usr/src/linux-2.6.31.5-0.1/Module.symvers
is missing; modules will have no dependencies and modversions.
make -f scripts/Makefile.build obj=/tmp/vbox.0
/tmp/vbox.0/Makefile:150: Warning: using /usr/src/linux as the source directory of your Linux kernel. If this is not correct, specify KERN_DIR=<directory> and run Make again.
gcc -Wp,-MD,/tmp/vbox.0/linux/.SUPDrv-linux.o.d -nostdinc -isystem /usr/lib/gcc/i586-suse-linux/4.4/include -Iinclude -I/usr/src/linux-2.6.31.5-0.1/arch/x86/include -include include/linux/autoconf.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m64 -mno-red-zone -mcmodel=kernel -maccumulate-outgoing-args -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -fomit-frame-pointer -I/usr/src/linux/include -I/tmp/vbox.0/ -I/tmp/vbox.0/include -I/tmp/vbox.0/r0drv/linux -D__KERNEL__ -DMODULE -DRT_OS_LINUX -DIN_RING0 -DIN_RT_R0 -DIN_SUP_R0 -DVBOX -DRT_WITH_VBOX -DVBOX_WITH_HARDENING -DCONFIG_VBOXDRV_AS_MISC -DRT_ARCH_X86 -DVBOX_WITH_64_BITS_GUESTS -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(SUPDrv_linux)" -D"KBUILD_MODNAME=KBUILD_STR(vboxdrv)" -c -o /tmp/vbox.0/linux/SUPDrv-linux.o /tmp/vbox.0/linux/SUPDrv-linux.c
/tmp/vbox.0/linux/SUPDrv-linux.c:1: error: code model 'kernel' not supported in the 32 bit mode
/tmp/vbox.0/linux/SUPDrv-linux.c:1: sorry, unimplemented: 64-bit mode not compiled in
make[2]: *** [/tmp/vbox.0/linux/SUPDrv-linux.o] Error 1
make[1]: *** [_module_/tmp/vbox.0] Error 2
make: *** [vboxdrv] Error 2
/var/log/vbox-install.log shows the following:
Makefile:150: Warning: using /usr/src/linux as the source directory of your Linux kernel. If this is not correct, specify KERN_DIR=<directory> and run Make again.
make KBUILD_VERBOSE=1 -C /usr/src/linux SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 modules
test -e include/linux/autoconf.h -a -e include/config/auto.conf || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/linux/autoconf.h or include/config/auto.conf are missing."; \
echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo; \
/bin/false)
ERROR: Kernel configuration is invalid.
include/linux/autoconf.h or include/config/auto.conf are missing.
Run 'make oldconfig && make prepare' on kernel src to fix it.
mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/*
WARNING: Symbol version dump /usr/src/linux-2.6.31.5-0.1/Module.symvers
is missing; modules will have no dependencies and modversions.
make -f scripts/Makefile.build obj=/tmp/vbox.0
/tmp/vbox.0/Makefile:150: Warning: using /usr/src/linux as the source directory of your Linux kernel. If this is not correct, specify KERN_DIR=<directory> and run Make again.
gcc -Wp,-MD,/tmp/vbox.0/linux/.SUPDrv-linux.o.d -nostdinc -isystem /usr/lib/gcc/i586-suse-linux/4.4/include -Iinclude -I/usr/src/linux-2.6.31.5-0.1/arch/x86/include -include include/linux/autoconf.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m64 -mno-red-zone -mcmodel=kernel -maccumulate-outgoing-args -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -fomit-frame-pointer -I/usr/src/linux/include -I/tmp/vbox.0/ -I/tmp/vbox.0/include -I/tmp/vbox.0/r0drv/linux -D__KERNEL__ -DMODULE -DRT_OS_LINUX -DIN_RING0 -DIN_RT_R0 -DIN_SUP_R0 -DVBOX -DRT_WITH_VBOX -DVBOX_WITH_HARDENING -DCONFIG_VBOXDRV_AS_MISC -DRT_ARCH_X86 -DVBOX_WITH_64_BITS_GUESTS -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(SUPDrv_linux)" -D"KBUILD_MODNAME=KBUILD_STR(vboxdrv)" -c -o /tmp/vbox.0/linux/SUPDrv-linux.o /tmp/vbox.0/linux/SUPDrv-linux.c
/tmp/vbox.0/linux/SUPDrv-linux.c:1: error: code model 'kernel' not supported in the 32 bit mode
/tmp/vbox.0/linux/SUPDrv-linux.c:1: sorry, unimplemented: 64-bit mode not compiled in
make[2]: *** [/tmp/vbox.0/linux/SUPDrv-linux.o] Error 1
make[1]: *** [_module_/tmp/vbox.0] Error 2
make: *** [vboxdrv] Error 2
-
- Posts: 1
- Joined: 14. Nov 2009, 16:34
- Primary OS: openSUSE
- VBox Version: OSE other
- Guest OSses: XP
Re: virtualbox for openSUSE 11.2
Hello,
did you install kernel-syms? I had the same problem and after installing kernel-syms, VB runs fine under OpenSuse 11.2
Regards Uwe
did you install kernel-syms? I had the same problem and after installing kernel-syms, VB runs fine under OpenSuse 11.2
Regards Uwe
-
- Posts: 1
- Joined: 14. Nov 2009, 16:56
- Primary OS: Linux other
- VBox Version: OSE other
- Guest OSses: Windows XP
Re: virtualbox for openSUSE 11.2
Hi,
I have the same error, I solve it downloading kernel-default-devel and all works fine
$>zypper in kernel-default-devel.
Bye,
Mirko
I have the same error, I solve it downloading kernel-default-devel and all works fine
$>zypper in kernel-default-devel.
Bye,
Mirko
-
- Posts: 5
- Joined: 20. Nov 2009, 19:31
- Primary OS: openSUSE
- VBox Version: OSE other
- Guest OSses: windows xp and opensolaris
Re: virtualbox for openSUSE 11.2
I went through it.
found the problem.
need to do:
install KERNEL SOURCE,
enter in /usr/src/linux/ then
MAKE MENUCONFIG (AS ROOT)
and after:
MAKE....
It will take a YEAR, BUT will resolve.
after....
/etc/init.d/vboxdvr setup OK....
excuse my bad English, I'm Brazilian.
I have helped!
found the problem.
need to do:
install KERNEL SOURCE,
enter in /usr/src/linux/ then
MAKE MENUCONFIG (AS ROOT)
and after:
MAKE....
It will take a YEAR, BUT will resolve.
after....
/etc/init.d/vboxdvr setup OK....
excuse my bad English, I'm Brazilian.
I have helped!
-
- Volunteer
- Posts: 17798
- Joined: 17. Mar 2008, 13:41
- Primary OS: Debian other
- VBox Version: PUEL
- Guest OSses: Windows XP, Windows 7, Linux
- Location: /dev/random
Re: virtualbox for openSUSE 11.2
There are RPM packages of the 3.1.0 beta, which can be found in the Beta forum (here is the download page: http://download.virtualbox.org/virtualbox/3.1.0_BETA2/).
Read the Forum Posting Guide before opening a topic.
VirtualBox FAQ: Check this before asking questions.
Online User Manual: A must read if you want to know what we're talking about.
Howto: Install Linux Guest Additions
Howto: Use Shared Folders on Linux Guest
See the Tutorials and FAQ section at the top of the Forum for more guides.
Try searching the forums first with Google and add the site filter for this forum.
E.g. install guest additions site:forums.virtualbox.org
Retired from this Forum since OSSO introduction.
VirtualBox FAQ: Check this before asking questions.
Online User Manual: A must read if you want to know what we're talking about.
Howto: Install Linux Guest Additions
Howto: Use Shared Folders on Linux Guest
See the Tutorials and FAQ section at the top of the Forum for more guides.
Try searching the forums first with Google and add the site filter for this forum.
E.g. install guest additions site:forums.virtualbox.org
Retired from this Forum since OSSO introduction.
-
- Posts: 1
- Joined: 12. Dec 2009, 22:46
- Primary OS: Other
- VBox Version: OSE other
- Guest OSses: Windows XP,Windows 7
Re: virtualbox for openSUSE 11.2
Thank you bonkoski.
It has really taken YEAR, but it really works.
It has really taken YEAR, but it really works.
-
- Posts: 5
- Joined: 15. Feb 2010, 10:26
- Primary OS: openSUSE
- VBox Version: PUEL
- Guest OSses: XP
Re: virtualbox for openSUSE 11.2
I am running into the same problems as birdra, with vboxdrv not being created, and get exactly the same messages.
I do not feel like recompiling the kernel (the bonkoski solution) and wonder if there is a shorter way of making the PUEL version work on OpenSUSE 11.2.
I installed all the packages mentioned here (kernel symbols, devel and all), but still the autoconf.h file or the include/config directory do not exist.
Anyone any idea of what packages I need to install in order to get past this point without recompiling the kernel ? Or is there maybe a different 11.2 kernel available that will work straight out of the box ?
-
- Posts: 101
- Joined: 16. Apr 2009, 11:36
- Primary OS: openSUSE
- VBox Version: PUEL
- Guest OSses: windows xp
Re: virtualbox for openSUSE 11.2
Try this to get all dependencies:
Then try to install.
Code: Select all
zypper in -t pattern devel_kernel
-
- Posts: 30
- Joined: 25. Nov 2009, 19:25
- Primary OS: openSUSE
- VBox Version: OSE other
- Guest OSses: WinXP
Re: virtualbox for openSUSE 11.2
I just installed 3.1.4 on my 11.2X64 install with no problems. I just clicked on the link to the rpm and selected install package. Have been running VBox on 11.2 for several months now. There is a link on the VBox download section for suse 11.2,11.2.
If you are having compiling problems you have dependency issues. You have to install make and gc in 11.2, and there are some others, kernelsysms and something else. Look around the forum and you will find the list. Or search for every post on my username and you will find it in one of them. Sorry, but I don't remember it now.
Get the dependencies fixed and you should be ready to rox with VBox.
If you are having compiling problems you have dependency issues. You have to install make and gc in 11.2, and there are some others, kernelsysms and something else. Look around the forum and you will find the list. Or search for every post on my username and you will find it in one of them. Sorry, but I don't remember it now.
Get the dependencies fixed and you should be ready to rox with VBox.
-
- Posts: 5
- Joined: 15. Feb 2010, 10:26
- Primary OS: openSUSE
- VBox Version: PUEL
- Guest OSses: XP
Re: virtualbox for openSUSE 11.2
Got it !
First I had a look at the openSUSE site :
http://en.opensuse.org/VirtualBox_installation
and found out that I did not have the xalan-c and xerces-c packages installed.
Once this was OK I reinstalled VirtualBox, but it still failed. As before, part of the message was :
only this time it worked (it did not before).Run 'make oldconfig && make prepare' on kernel src to fix it.
Another try of "/etc/rc.d/vboxdrv setup' now showed a completely different error message : all my source packages were for kernel 2.6.31.12 while I had a 2.6.31.5 kernel running.
So I used yast to install the 2.6.31.12 kernel, rebooted the PC, ran the '/etc/rc.d/vboxdrv setup' thing again and guess what : It worked !!!
Which means I have virtualbox installed now. Cannot wait to start playing around with it.