failed to created a proxy device for the usb device.
-
- Posts: 2
- Joined: 9. Mar 2009, 15:03
failed to created a proxy device for the usb device.
Hi all
Is there any chance anyone has any experience on this (detailed below)? Thank you very much.
Failed to create a proxy device for the USB device. (Error: VERR_READ_ERROR).
Result Code: NS_ERROR_FAILURE(0X80004005)
Component: Console
Interface: IConsole
Could this be a problem in the host or VB? Thanks. I connected this device to the computer directly and it worked fine. But when I connected the device to the computer via a hub, this error message showed up. No clue at all. Thanks for helping out.
Is there any chance anyone has any experience on this (detailed below)? Thank you very much.
Failed to create a proxy device for the USB device. (Error: VERR_READ_ERROR).
Result Code: NS_ERROR_FAILURE(0X80004005)
Component: Console
Interface: IConsole
Could this be a problem in the host or VB? Thanks. I connected this device to the computer directly and it worked fine. But when I connected the device to the computer via a hub, this error message showed up. No clue at all. Thanks for helping out.
Re: failed to created a proxy device for the usb device.
Usb hubs are notorious for such problems, don't use hubs if you can.
[This space is intentionally left blank]
If you can read this, you can read the VirtualBox Manual, the Forum FAQ, and the QuickClick FAQ
-=[ Search this forum with Keywords, VirtualBox solutions at you're fingertips]=-
If you can read this, you can read the VirtualBox Manual, the Forum FAQ, and the QuickClick FAQ
-=[ Search this forum with Keywords, VirtualBox solutions at you're fingertips]=-
-
- Posts: 2
- Joined: 9. Mar 2009, 15:03
Re: failed to created a proxy device for the usb device.
Hi thanks for the information. But a USB key connected via the same hub can be recognized by the guest and worked well. Do you think this error message is caused by the communication between the host and the USB device please? Thank you.
Re: failed to created a proxy device for the usb device.
Same problem on Debian Squeeze & Virtualbox 3.0:
USB devices like Flash Drives, USB mouse and keyboards attaches good, but one device (Amicon USB VPN key) failed to attach with error:
I try older Virtualbox 2.2 but it isn't help.
This key attaches normally on Ubuntu Jaunty (i386 and amd64) & Virtualbox 3.0 (on three computers!), but on Debian - fails. What I can look or do for search the problem?
USB device info (/proc/bus/usb/devices file):
USB devices like Flash Drives, USB mouse and keyboards attaches good, but one device (Amicon USB VPN key) failed to attach with error:
Code: Select all
00:00:31.881 ERROR [COM]: aRC=NS_ERROR_FAILURE (0x80004005) aIID={9511bc54-15ee-4ddf-808e-472aba03809c} aComponent={Console} aText={Failed to create a proxy device for the USB device. (Error: VERR_READ_ERROR)} aWarning=false, preserve=false
This key attaches normally on Ubuntu Jaunty (i386 and amd64) & Virtualbox 3.0 (on three computers!), but on Debian - fails. What I can look or do for search the problem?
USB device info (/proc/bus/usb/devices file):
Code: Select all
T: Bus=04 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
P: Vendor=a420 ProdID=5420 Rev= 1.00
S: Manufacturer=AMICON
S: Product=VPNLDR 1.5
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=130mA
I:* If#= 0 Alt= 0 #EPs= 4 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 16 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
Re: failed to created a proxy device for the usb device.
the same problem with amicon vpnloader. debian lenny vbox 3.0.2. does anyone have any suggestion?
Re: failed to created a proxy device for the usb device.
i've played a bit with my box again, thinking that it's a problem with rights
I run virtualbox in headless mode from root, controlling it via vrdp
here is output of VBoxManage list usbhost before experiment:
then I connect it to virtualbox by this:
the device seems to be captured:
Once again I should say that the situation is the same while running virtualbox from my user or from root.
I run virtualbox in headless mode from root, controlling it via vrdp
here is output of VBoxManage list usbhost before experiment:
- UUID: 1115d7c8-d11e-41b4-b9e7-6d8851c1dfee
VendorId: 0xa420 (A420)
ProductId: 0x5420 (5420)
Revision: 1.0 (0100)
Manufacturer: AMICON
Product: VPNLDR 1.5
Address: /proc/bus/usb/003/002
Current State: Available
then I connect it to virtualbox by this:
Code: Select all
VBoxManage controlvm WinXP usbattach /proc/bus/usb/003/002
- UUID: 1115d7c8-d11e-41b4-b9e7-6d8851c1dfee
VendorId: 0xa420 (A420)
ProductId: 0x5420 (5420)
Revision: 1.0 (0100)
Manufacturer: AMICON
Product: VPNLDR 1.5
Address: /proc/bus/usb/003/002
Current State: Captured
- UUID: 1115d7c8-d11e-41b4-b9e7-6d8851c1dfee
VendorId: 0xa420 (A420)
ProductId: 0x5420 (5420)
Revision: 1.0 (0100)
Manufacturer: AMICON
Product: VPNLDR 1.5
Address: /proc/bus/usb/003/002
Current State: Held
Once again I should say that the situation is the same while running virtualbox from my user or from root.
Re: failed to created a proxy device for the usb device.
I'll try to attach the usb device to the virtualbox guest winxp started by user, by user via sudo and by root, in all times I can't connect the AMICON VPNLDR 1.5 device. Other usb devices (flash drives, mouse, keyboard, etc) connects successfully.
What difference in permissons when attaching AMICON and other USB device?
What difference in permissons when attaching AMICON and other USB device?
Re: failed to created a proxy device for the usb device.
I have updated virtualbox on Debian Squeeze to 3.0.8-53138_Debian_lenny because in changelog I have found:
Can anybody tell me the method to detect the problem or which files and packages is depend on the usb mount process in virtualbox?
But the problem with AMICON VPNLDR 1.5 USB dongle (VPN key) is still here.# Linux hosts: change the default USB access mode on certain distributions (bugs #3394 and #4291)
Can anybody tell me the method to detect the problem or which files and packages is depend on the usb mount process in virtualbox?
Re: failed to created a proxy device for the usb device.
I have created a bug-report about this problem: http://www.virtualbox.org/ticket/5175
Re: failed to created a proxy device for the usb device.
Hello everyone, i have that same error message and coming here just to tell what i noticed if it can help (i am far from being competent with linux yet so this wont be technical at all).
I have to install a work station under linuxmint 13 (maya) and have to install a windows XP host ... problems occurs when i need to install and configure a "Silhouette CAMEO" wich basically is a "cutter" ...
Here is the facts : as soon as i plug the cameo and turn it on, linuxmint detects it and tell me there is no driver for it ... then i can add an usb filter saying "unknown device" or something like that, then if i launch the VM i get this message :
"Échec de la connexion du périphérique USB Périphérique inconnu 0B4D:1121 [0100] à la machine virtuelle Windows XP.
Failed to create a proxy device for the USB device. (Error: VERR_READ_ERROR)."
if i just start my VM and turn the power on, i get the linux driver message then this message ... nothing to do then ...
BUT ... when i just plug the cameo and turn it on, then reboot my host, no detection, no error message, then boot my VM, the cameo is fully recognized and usable ... of course if i ever turn it off or unplug and plug it again, the same crap happen.
I think that once linux "know" that peripherial wont work, he cant make a link between the usb port and the VM, but can do without even knowing its here ... wich sound totally strange but well ... thats what i noticed.
Hope (even if i doubt it) this will help or anyone would have a solution for linuxmint, for now editing files that i dont even really understand the use sounds like losing more time than i actualy do so im reluctant to try such and such said solution i could read
Cordially, Matthias Joets.
I have to install a work station under linuxmint 13 (maya) and have to install a windows XP host ... problems occurs when i need to install and configure a "Silhouette CAMEO" wich basically is a "cutter" ...
Here is the facts : as soon as i plug the cameo and turn it on, linuxmint detects it and tell me there is no driver for it ... then i can add an usb filter saying "unknown device" or something like that, then if i launch the VM i get this message :
"Échec de la connexion du périphérique USB Périphérique inconnu 0B4D:1121 [0100] à la machine virtuelle Windows XP.
Failed to create a proxy device for the USB device. (Error: VERR_READ_ERROR)."
if i just start my VM and turn the power on, i get the linux driver message then this message ... nothing to do then ...
BUT ... when i just plug the cameo and turn it on, then reboot my host, no detection, no error message, then boot my VM, the cameo is fully recognized and usable ... of course if i ever turn it off or unplug and plug it again, the same crap happen.
I think that once linux "know" that peripherial wont work, he cant make a link between the usb port and the VM, but can do without even knowing its here ... wich sound totally strange but well ... thats what i noticed.
Hope (even if i doubt it) this will help or anyone would have a solution for linuxmint, for now editing files that i dont even really understand the use sounds like losing more time than i actualy do so im reluctant to try such and such said solution i could read
Cordially, Matthias Joets.