Version 5.0.8 will not mount Bootcamp partition
Version 5.0.8 will not mount Bootcamp partition
Not sure if this has been addressed previously on this forum. Upgraded to 5.0.8 and on starting a Bootcamp partition that has worked flawlessly on versions 4.* returned an error as below:
VD: error VERR_NOT_SUPPORTED opening image file '/Users/alitchfi/win7raw.vmdk' (VERR_NOT_SUPPORTED).
VD: error VERR_NOT_SUPPORTED opening image file '/Users/alitchfi/win7raw.vmdk' (VERR_NOT_SUPPORTED).
Failed to open image '/Users/alitchfi/win7raw.vmdk' in read-write mode (VERR_NOT_SUPPORTED).
Failed to attach driver below us! Not supported. (VERR_NOT_SUPPORTED).
AHCI: Failed to attach drive to Port0 (VERR_NOT_SUPPORTED).
Result Code:
NS_ERROR_FAILURE (0x80004005)
Component:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
I reinstalled version 4.3.32 r103443 and the Bootcamp runs as previously.
What is required to make the vm run the version 5.*?
VD: error VERR_NOT_SUPPORTED opening image file '/Users/alitchfi/win7raw.vmdk' (VERR_NOT_SUPPORTED).
VD: error VERR_NOT_SUPPORTED opening image file '/Users/alitchfi/win7raw.vmdk' (VERR_NOT_SUPPORTED).
Failed to open image '/Users/alitchfi/win7raw.vmdk' in read-write mode (VERR_NOT_SUPPORTED).
Failed to attach driver below us! Not supported. (VERR_NOT_SUPPORTED).
AHCI: Failed to attach drive to Port0 (VERR_NOT_SUPPORTED).
Result Code:
NS_ERROR_FAILURE (0x80004005)
Component:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
I reinstalled version 4.3.32 r103443 and the Bootcamp runs as previously.
What is required to make the vm run the version 5.*?
Re: Version 5.0.8 will not mount Bootcamp partition
Yes. I confirm that I got the exact same error message and I tried various things such as re-installing 5.0.8 and re-creating the virtual machine file but nothing worked. I reinstalled back the old VirtualBox 4.3.32 and it's back to normal. I hope this gets fixed as it would be nice to be able to access USB 3.0.
Re: Version 5.0.8 will not mount Bootcamp partition
Thanks. I was going to try making a new vm but now that I see what you have reported, I will not.
Re: Version 5.0.8 will not mount Bootcamp partition
Created account to report same issue. By deleting the image from SATA and adding as IDE, I was able to get a kernel panic (yay, further than reported behavior), but couldn't get the machine to boot. Reverted to 4.3.32 and everything is peachy. Issue persists in 5.10
Re: Version 5.0.8 will not mount Bootcamp partition
I'm also experiencing the exact same issue, with Bootcamp/Win7 and VirtualBox 5 on an OSX host. Same error message.
I've also reverted to the final version of 4.3.32, which does still work, but not with USB, as this is broken in El Capitan/VB 4.3.32 (there's another thread about this).
Signed up here, as I'd like to find out if/when the Bootcamp issue gets resolved in a 5.x release, so I can upgrade and hopefully get USB support back!
Happy to provide more details if this will help debug.
I've also reverted to the final version of 4.3.32, which does still work, but not with USB, as this is broken in El Capitan/VB 4.3.32 (there's another thread about this).
Signed up here, as I'd like to find out if/when the Bootcamp issue gets resolved in a 5.x release, so I can upgrade and hopefully get USB support back!
Happy to provide more details if this will help debug.
Re: Version 5.0.8 will not mount Bootcamp partition
I created an account as a "me too" for this error on version 5.0.10. Reverted back to 4.3.34 and issue appears resolved.
-
- Volunteer
- Posts: 8851
- Joined: 30. Apr 2009, 09:45
- Primary OS: Mac OS X other
- VBox Version: PUEL
- Guest OSses: just about all that run
Re: Version 5.0.8 will not mount Bootcamp partition
There is a Bugtracker ticket addressing the problem: Ticket 14613
OSX, Linux and Windows Hosts & Guests
There are three groups of people. Those that can count and those that can't.
There are three groups of people. Those that can count and those that can't.
-
- Oracle Corporation
- Posts: 3362
- Joined: 7. Jun 2007, 09:11
- Primary OS: Debian Sid
- VBox Version: PUEL
- Guest OSses: Linux, Windows
- Location: Dresden, Germany
- Contact:
Re: Version 5.0.8 will not mount Bootcamp partition
Please read that ticket, try the latest test build and attach the VBox.log file to that ticket.
-
- Posts: 15
- Joined: 17. Oct 2015, 14:12
Re: Version 5.0.8 will not mount Bootcamp partition
I think I'm gonna going crazy trying to boot external usbwith VirtualBox but it seems 5.0.8
This weekend I get boot a Windows 10 to go with a external USB 3.0 flash and I was trying to round the circle booting that external drive with VirtualBox as use to do with Bootcamp partition
Several a tutorials after I saw its VirtualBox 5.0.8 bug. Will wait, hope soon It could be resolved
This weekend I get boot a Windows 10 to go with a external USB 3.0 flash and I was trying to round the circle booting that external drive with VirtualBox as use to do with Bootcamp partition
Several a tutorials after I saw its VirtualBox 5.0.8 bug. Will wait, hope soon It could be resolved
-
- Site Moderator
- Posts: 27329
- Joined: 22. Oct 2010, 11:03
- Primary OS: Mac OS X other
- VBox Version: PUEL
- Guest OSses: Win(*>98), Linux*, OSX>10.5
- Location: Greece
Re: Version 5.0.8 will not mount Bootcamp partition
I'm afraid that you cannot boot an external USB drive with VirtualBox. Independent of the version. This is not a bug, it simply doesn't exist. VirtualBox does not support it.alfon_sico wrote:I think I'm gonna going crazy trying to boot external usb with VirtualBox
Do NOT send me Personal Messages (PMs) for troubleshooting, they are simply deleted.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
-
- Posts: 15
- Joined: 17. Oct 2015, 14:12
Re: Version 5.0.8 will not mount Bootcamp partition
Ouch! I think I could resolve waiting for 5.0.11socratis wrote:I'm afraid that you cannot boot an external USB drive with VirtualBox. Independent of the version. This is not a bug, it simply doesn't exist. VirtualBox does not support it.alfon_sico wrote:I think I'm gonna going crazy trying to boot external usb with VirtualBox
Well, I saw some tricks to get it with Virtualbox Windows Host
http://www.rmprepusb.com/tutorials/how- ... are-server
Would you think I could find something similar?
-
- Site Moderator
- Posts: 27329
- Joined: 22. Oct 2010, 11:03
- Primary OS: Mac OS X other
- VBox Version: PUEL
- Guest OSses: Win(*>98), Linux*, OSX>10.5
- Location: Greece
Re: Version 5.0.8 will not mount Bootcamp partition
I don't know, I haven't tried it. You could go for raw access of the USB (in theory), but I haven't had the need for it either.
Do NOT send me Personal Messages (PMs) for troubleshooting, they are simply deleted.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Re: Version 5.0.8 will not mount Bootcamp partition
In the setting for mass storage, under "Controller: SATA" you have to enable "Use Host I/O cache". Win-8.1 Bootcamp partition well accessible by VB 5.04 under OSX 10.11.3 here. Give it a try with VB 5.08.AlanL wrote:Not sure if this has been addressed previously on this forum. Upgraded to 5.0.8 and on starting a Bootcamp partition that has worked flawlessly on versions 4.* returned an error as below:
VD: error VERR_NOT_SUPPORTED opening image file '/Users/alitchfi/win7raw.vmdk' (VERR_NOT_SUPPORTED).
VD: error VERR_NOT_SUPPORTED opening image file '/Users/alitchfi/win7raw.vmdk' (VERR_NOT_SUPPORTED).
Failed to open image '/Users/alitchfi/win7raw.vmdk' in read-write mode (VERR_NOT_SUPPORTED).
Failed to attach driver below us! Not supported. (VERR_NOT_SUPPORTED).
AHCI: Failed to attach drive to Port0 (VERR_NOT_SUPPORTED).
Result Code:
NS_ERROR_FAILURE (0x80004005)
Component:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
I reinstalled version 4.3.32 r103443 and the Bootcamp runs as previously.
What is required to make the vm run the version 5.*?