Internet Connection issue on mac os x

[luks]

Hello
I have installed Virtual box and Oracle Linux version on Mac OS X host.
I tried various option to get the internet working on my guest but its no luck so far.

The current Network setting as :
Enable Network Adaptor : Checked
Attached to : Bridget Adaptor
Name : en1 Wifi (Airport)
Adaptor Type : Intel PRO/1000MT Desktop


I tired with NAT/ Host only etc adaptor too.

Please help.

[mpack]

Try again with NAT. "Host only" mode is for a secure (isolated) network between host and guest - it's kinda the point of the thing that you can't get onto the internet via that. The clue is in the name "host only".

[luks]

I tired that but no luck.
Any other suggestion.

Also i have another guest (Ubuntu) installed on same host and it uses the NAT and it works fine.
I am assuming it has to be something with Oracle Linux.

[Perryg]

From your description I would say that you need to address this issue within the guest. Set the guest to use VBox NAT and configure the guest to use dhcp.

[luks]

I am sorry .. i am new to this so could you please explain or guide how i can do this?

[Perryg]

Do what? Configure the guests network? Use google.

https://www.google.com/search?q=configu ... gws_rd=ssl

[luks]

I tired using setting dhcp connection ( adding if cfg-eth#) file however it did not work.
Also when i use the command ifconfig it shows me only lo and its property but when i do the ifconfig -a then it gives me eth6 and some values.
I could not locate that file if cfg-eth6 file under network-scripts so manually added it and when i did the ifconfig ethic up internet did NOT work as well my localhost (was server em console ) went down.
Am i doing this correct ?
and as soon as i bring the ether down localhost went up and running.
So lost don't know what to do.

Please help!

[Perryg]

From the hosts terminal/command window type VBoxManage showvminfo <VM Name> --details and post here. Replace <VM Name> with the actual name of the VM. Use " " if the name has a space in it.

[luks]

Name: Oracle_SOA
Groups: /
Guest OS: Oracle (64 bit)
UUID: 615435c3-81d3-4d17-989e-6c04715efe53
Config file: /Users/Vansh/VirtualBox VMs/Oracle_SOA/Oracle_SOA.vbox
Snapshot folder: /Users/Vansh/VirtualBox VMs/Oracle_SOA/Snapshots
Log folder: /Users/Vansh/VirtualBox VMs/Oracle_SOA/Logs
Hardware UUID: 615435c3-81d3-4d17-989e-6c04715efe53
Memory size: 5630MB
Page Fusion: off
VRAM size: 64MB
CPU exec cap: 100%
HPET: off
Chipset: piix3
Firmware: BIOS
Number of CPUs: 4
PAE: on
Long Mode: on
Synthetic CPU: off
CPUID overrides: None
Boot menu mode: message and menu
Boot Device (1): HardDisk
Boot Device (2): DVD
Boot Device (3): Floppy
Boot Device (4): Not Assigned
ACPI: on
IOAPIC: on
Time offset: 0ms
RTC: UTC
Hardw. virt.ext: on
Nested Paging: on
Large Pages: off
VT-x VPID: on
VT-x unr. exec.: on
State: powered off (since 2015-03-03T03:13:40.707000000)
Monitor count: 1
3D Acceleration: on
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: off
Allow Tracing to Access VM: off
Tracing Configuration:
Autostart Enabled: off
Autostart Delay: 0
Default Frontend:
Storage Controller Name (0): IDE Controller
Storage Controller Type (0): PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 2
Storage Controller Port Count (0): 2
Storage Controller Bootable (0): on
Storage Controller Name (1): SATA Controller
Storage Controller Type (1): IntelAhci
Storage Controller Instance Number (1): 0
Storage Controller Max Port Count (1): 30
Storage Controller Port Count (1): 3
Storage Controller Bootable (1): on
IDE Controller (1, 0): Empty
SATA Controller (0, 0): /Users/Vansh/VirtualBox VMs/Oracle_SOA/oel6-64bit-soasuite-11gr1-ps6-disk2.vmdk (UUID: af396226-2f73-45a1-a49f-f36ad1607e32)
SATA Controller (1, 0): /Users/Vansh/VirtualBox VMs/Oracle_SOA/oel6-64bit-soasuite-11gr1-ps6-disk3.vmdk (UUID: f28069c0-2e73-4736-bb49-27563aaf79df)
SATA Controller (2, 0): /Users/Vansh/VirtualBox VMs/Oracle_SOA/oel6-64bit-soasuite-11gr1-ps6-disk4.vmdk (UUID: c4b86089-cd34-4152-9844-f595a7ac9622)
NIC 1: MAC: 080027007391, Attachment: NAT, Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: allow-vms, Bandwidth group: none
NIC 1 Settings: MTU: 0, Socket (send: 64, receive: 64), TCP Window (send:64, receive: 64)
NIC 1 Rule(0): name = AdminServer, protocol = tcp, host ip = , host port = 7001, guest ip = , guest port = 7001
NIC 1 Rule(1): name = BAM, protocol = tcp, host ip = , host port = 9001, guest ip = , guest port = 9001
NIC 1 Rule(2): name = DB Apex, protocol = tcp, host ip = , host port = 8080, guest ip = , guest port = 8080
NIC 1 Rule(3): name = DB Listener, protocol = tcp, host ip = , host port = 1521, guest ip = , guest port = 1521
NIC 1 Rule(4): name = JPD, protocol = tcp, host ip = , host port = 4000, guest ip = , guest port = 4000
NIC 1 Rule(5): name = OEP, protocol = tcp, host ip = , host port = 9002, guest ip = , guest port = 9002
NIC 1 Rule(6): name = SSH, protocol = tcp, host ip = , host port = 2222, guest ip = , guest port = 22
NIC 1 Rule(7): name = UCM, protocol = tcp, host ip = , host port = 16200, guest ip = , guest port = 16200
NIC 1 Rule(8): name = VNC, protocol = tcp, host ip = , host port = 5901, guest ip = , guest port = 5901
NIC 1 Rule(9): name = WC Collaboration, protocol = tcp, host ip = , host port = 8890, guest ip = , guest port = 8890
NIC 1 Rule(10): name = WC Spaces, protocol = tcp, host ip = , host port = 8888, guest ip = , guest port = 8888
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: PS/2 Mouse
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
LPT 1: disabled
LPT 2: disabled
Audio: enabled (Driver: CoreAudio, Controller: AC97)
Clipboard Mode: Bidirectional
Drag'n'drop Mode: HostToGuest
VRDE: disabled
USB: enabled
EHCI: disabled

USB Device Filters:

<none>

Available remote USB devices:

<none>

Currently Attached USB Devices:

<none>

Bandwidth groups: <none>

Shared folders:

Name: 'Vansh', Host path: '/Users/Vansh' (machine mapping), writable

VRDE Connection: not active
Clients so far: 0

Video capturing: not active
Capture screens: 0
Capture file: /Users/Vansh/VirtualBox VMs/Oracle_SOA/Oracle_SOA.webm
Capture dimensions: 1024x768
Capture rate: 512 kbps
Capture FPS: 25

Description:
Virtual machine for Oracle SOA Suite, Oracle BPM Suite, Oracle Service Bus and Oracle Event Processing 11g 11.1.1.7.0 (a.k.a. PS6).
Guest:

Configured memory balloon size: 0 MB

[Perryg]

According to your setting you should have connection, so it must be in the guest.

If you type lspci in the guests terminal you should see an Intel ethernet adapter. If so then it is all about configuration of the guest.

[luks]

Yes it does but no internet connection
Here is what i have

00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter
00:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox Guest Service
00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01)
00:06.0 USB controller: Apple Inc. KeyLargo/Intrepid USB
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
00:0d.0 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02)

oracle@soabpm-vm ~]$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:274 errors:0 dropped:0 overruns:0 frame:0
TX packets:274 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22256 (21.7 KiB) TX bytes:22256 (21.7 KiB)

[oracle@soabpm-vm ~]$ ifconfig -a
eth6 Link encap:Ethernet HWaddr 08:00:27:00:73:91
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:306 errors:0 dropped:0 overruns:0 frame:0
TX packets:306 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:24176 (23.6 KiB) TX bytes:24176 (23.6 KiB)

oracle@soabpm-vm ~]$ ping www.google.com
ping: unknown host www.google.com

[Perryg]

What version of OLE are you running?

[luks]

oracle@soabpm-vm ~]$ cat /etc/*-release
LSB_VERSION=base-4.0-amd64:base-4.0-noarch:core-4.0-amd64:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-noarch
Oracle Linux Server release 6.4
Red Hat Enterprise Linux Server release 6.4 (Santiago)
Oracle Linux Server release 6.4

[Perryg]

Ok I'll look into this after a while. In the middle of a major project at the moment.

[luks]

Thanks A lot!!
Just fyi this is my Network setting on virtual box attached