Hi,
I have just installed virtualbox 2.1.2 and I'm trying to install Solaris 10 U6 64-bit, but the installation just hangs after displaying:
SunOS release 5.10 Version Beneric_137138-09 32-bit
.....
Use is subject to license terms.
Here is the config I use:?
General
Name: SolarisU6
OS Type: Solaris (64 bit)
Base Memory: 1024 MB
Video Memory: 64 MB
Boot Order: CD/DVD-ROM, Hard Disk
ACPI: Enabled
IO APIC: Enabled
VT-x/AMD-V: Enabled
Nested Paging: Disabled
PAE/NX: Disabled
3D Acceleration: Enabled
Wasn't this problem was solved in a earlier version of Vbox?!
/Patrik
Installation of Solaris 10 Update 6 as guest hangs in 2.1.2
I've got the same problem.
Virtual Box on OSX 10.5 and the installation hangs with exactly the same message.
Config is almost the same and my log says:
00:00:14.460 ATA: Ctl: RESET, DevSel=1 AIOIf=0 CmdIf0=0xec (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:14.462 ATA: Ctl: finished processing RESET
00:00:14.470 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.474 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.481 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.485 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.492 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.497 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.504 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.507 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.515 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.519 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.527 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.531 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.539 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.542 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:17.912 PIT: mode=0 count=0xffff (65535) - 18.20 Hz (ch=0)
00:00:17.913 PIT: mode=0 count=0xffff (65535) - 18.20 Hz (ch=0)
00:00:17.943 PIT: mode=0 count=0xffff (65535) - 18.20 Hz (ch=0)
00:00:17.990 PIT: mode=0 count=0xffff (65535) - 18.20 Hz (ch=0)
Just one edit: I noticed the same behaviour with VB 2.1.4
Virtual Box on OSX 10.5 and the installation hangs with exactly the same message.
Config is almost the same and my log says:
00:00:14.460 ATA: Ctl: RESET, DevSel=1 AIOIf=0 CmdIf0=0xec (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:14.462 ATA: Ctl: finished processing RESET
00:00:14.470 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.474 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.481 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.485 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.492 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.497 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.504 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.507 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.515 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.519 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.527 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.531 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.539 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:14.542 Guest Log: BIOS: int13_harddisk: function 02, parameters out of range 0000/0000/0001!
00:00:17.912 PIT: mode=0 count=0xffff (65535) - 18.20 Hz (ch=0)
00:00:17.913 PIT: mode=0 count=0xffff (65535) - 18.20 Hz (ch=0)
00:00:17.943 PIT: mode=0 count=0xffff (65535) - 18.20 Hz (ch=0)
00:00:17.990 PIT: mode=0 count=0xffff (65535) - 18.20 Hz (ch=0)
Just one edit: I noticed the same behaviour with VB 2.1.4