I have a Beaglebone Black device with an empty eMMC, which means the processor is trying to RNDIS boot over USB. I am running a Ubuntu 16.04 host with VirtualBox 5.2.8r121009 and the extension pack installed. My user account is a member of vboxusers and I can successfully attach other USB devices to the Guest VM. The Guest VM is also Ubuntu 16.04. My Laptop is a Dell Precision 7520 and the USB port is USB 3.0, however the device is USB 2.0.
When I attempt to attach the Beaglebone Black in RNDIS mode, VirtualBox gives this error:
Code: Select all
00:00:23.327630 ERROR [COM]: aRC=NS_ERROR_FAILURE (0x80004005) aIID={872da645-4a9b-1727-bee2-5585105b9eed} aComponent={ConsoleWrap} aText={Failed to create a proxy device for the USB device. (Error: VERR_READ_ERROR)}, preserve=false aResultDetail=0
I am configuring the VM using Vagrant:
Code: Select all
Vagrant.configure("2") do |config|
config.vm.box = "ubuntu/xenial64"
config.vm.box_check_update = false
config.ssh.forward_agent = true
config.vm.synced_folder "../../tisdk/build/arago-tmp-external-linaro-toolchain/deploy", "/yocto_deploy"
config.vm.provider "virtualbox" do |vb|
vb.memory = '256'
vb.customize ['modifyvm', :id, '--usb', 'on', '--usbxhci', 'on']
vb.customize ["modifyvm", :id, "--ioapic", "on"]
vb.customize ['usbfilter', 'add', '0', '--target', :id, '--name', 'Texas Instruments AM335x USB', '--vendorid', '0x0451', '--productid', '0x6141']
vb.customize ["modifyvm", :id, "--hwvirtex", "on"]
end
config.vm.provision "shell", inline: <<-SHELL
apt-get update
apt-get dist-upgrade -y
apt-get install -y tftpd-hpa tftp isc-dhcp-server
SHELL
end
Code: Select all
Bus 001 Device 008: ID 0451:6141 Texas Instruments, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0451 Texas Instruments, Inc.
idProduct 0x6141
bcdDevice 0.00
iManufacturer 33 (error)
iProduct 37 (error)
iSerial 0
bNumConfigurations 1
OTG Descriptor:
bLength 3
bDescriptorType 9
bmAttributes 0x03
SRP (Session Request Protocol)
HNP (Host Negotiation Protocol)
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 70
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 1 (error)
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 255 Vendor Specific (MSFT RNDIS?)
iInterface 2 (error)
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities 0x00
bDataInterface 1
CDC ACM:
bmCapabilities 0x00
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 2 (error)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0xb4e0
(Bus Powered)
ALT port is HNP Capable
Debug Mode
Code: Select all
UUID: 1e1e0e25-b265-45cb-89b2-c284572242b6
VendorId: 0x0451 (0451)
ProductId: 0x6141 (6141)
Revision: 0.0 (0000)
Port: 2
USB version/speed: 2/Full
Manufacturer: Texas Instruments
Product: AM335x USB
Address: sysfs:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3//device:/dev/vboxusb/001/008
Current State: Available