Cannot open host device (CD-ROM)

Drew5316 · Post by **Drew5316** » 16. Nov 2011, 22:33

Can't seem to get the CD Rom working on an Ubuntu 10.04LTS Server running virtualbox 4.1.6. Keep getting the follow errors:

Cannot open host device '/dev/sr0' for readonly access. Check the permissions of that device ('/bin/ls -l /dev/sr0'): Most probably you need to be member of the device group. Make sure that you logout/login after changing the group settings of the current user (VERR_ACCESS_DENIED)

Code: Select all

Ran suggested command:

Code: Select all

> /bin/ls -l /dev/sr0
brwxrwx--- 1 root cdrom 11, 0 Nov 16 19:46 /dev/sr0

User is a member of the cdrom group. CD-ROM is mounted at /mnt/cd-dvd. Rebooted both virtualbox and host. Nada...

Any help would be greatly appreciated. Thanks,
Drew

Post by **Perryg** » 16. Nov 2011, 22:59

Add your user name to the vboxusers group. reboot and try again

Drew5316 · Post by **Drew5316** » 16. Nov 2011, 23:42

Perryg wrote:Add your user name to the vboxusers group. reboot and try again

That worked. I had the user in the vboxusers group, but apparently had not rebooted... Thanks.

Now I have an existing vdmk that I have set up, and loaded the WinXP CD to boot in to a repair mode (to remove an AGP graphics driver) and I can open Remote Desktop Connection, but all I get is a black screen stating, "Press any key to boot from CD....." and yet, despite hitting keys on the 3 different keyboards that may be attached (laptop that is running RDC, USB keyboard attached to the laptop, and a wireless USB keyboard attached to the server), I'm getting no response. Any thoughts?

Thanks,
Drew

Post by **Perryg** » 16. Nov 2011, 23:54

You seem to be having KB issues with the RDP session.
1) try using vRPD (requires that you have install the Extension Pack on the host)
2) make sure that you have *not* setup any USB filters for the KB or mouse. They are shared features.
3) read chapter 7 Remote virtual machines in your VirtualBox users manual

Drew5316 · Post by **Drew5316** » 17. Nov 2011, 00:58

Perryg wrote:You seem to be having KB issues with the RDP session.
1) try using vRPD (requires that you have install the Extension Pack on the host)
2) make sure that you have *not* setup any USB filters for the KB or mouse. They are shared features.
3) read chapter 7 Remote virtual machines in your VirtualBox users manual

OK, I'm starting to get lost...
1. Not sure how to do this... If I understand the Users Manual correctly (and I won't feel bad if I don't as it's a bit cryptic for my comprehension skills), Microsoft Remote Desktop Connection is compatible with VirtualBox Remote Display Protocol (VRDP). Is there something else I should be trying? I definitely have the correct version of the Oracle Extensions pack installed:

Code: Select all

> VBoxManage list extpacks
Extension Packs: 1
Pack no. 0:   Oracle VM VirtualBox Extension Pack
Version:      4.1.6
Revision:     74713
Description:  USB 2.0 Host Controller, VirtualBox RDP, PXE ROM with E1000 support.
VRDE Module:  VBoxVRDP
Usable:       true 
Why unusable:

2. Oops... I had one of these set up for the wireless keyboard. I removed it.
3. I'm reading -- not completely understanding, but willing to work through it -- and here's where I'm getting caught up:

Even when the extension is installed, the VRDP server is disabled by default. It can easily be enabled on a per-VM basis either in the VirtualBox Manager in the "Display" settings (see the section called “Display settings”) or with VBoxManage:
Code: Select all
VBoxManage modifyvm "VM name" --vrde on

Simple enough, however, here's what I get:

Code: Select all

> VBoxManage modifyvm "BonesVM" --vrde on
VBoxManage: error: Could not find a registered machine named 'BonesVM'
VBoxManage: error: Details: code VBOX_E_OBJECT_NOT_FOUND (0x80bb0001), component VirtualBox, interface IVirtualBox, callee nsISupports
Context: "FindMachine(Bstr(a->argv[0]).raw(), machine.asOutParam())" at line 360 of file VBoxManageModifyVM.cpp

So I go and try to list the registered vms:

Code: Select all

> VBoxManage list vms

...and nada. Nothing comes back, which means to me that no machine is "registered" even though I can see them and edit their preferences, etc... bugger.
Now I feel a little stuck, again.

Drew

Post by **Perryg** » 17. Nov 2011, 01:08

Looking back i saw that you listed some cryptic user because you thought that was the way to do it with phpvirtualbox. VirtualBox is really fussy about the user. You cannot set it up as one user and run it as another at a whim due to security.

Drew5316 · Post by **Drew5316** » 17. Nov 2011, 01:41

Perryg wrote:Looking back i saw that you listed some cryptic user because you thought that was the way to do it with phpvirtualbox. VirtualBox is really fussy about the user. You cannot set it up as one user and run it as another at a whim due to security.

So you're suggesting I add "admin" to the Linux user pool...?

Drew

Post by **Perryg** » 17. Nov 2011, 01:48

Not at all. Never run VBox as admin/root.
What I am saying is the user that installs, starts VirtualBox & creates guests must be the same user and be in the vboxusers group.
This sets the VBOX_USER_HOME environment (chapter 10.1.3 Global configuration data) in your VirtualBox users manual.

Drew5316 · Post by **Drew5316** » 17. Nov 2011, 19:00

First, I'd like to thank you for taking the time to respond. I really appreciate it.

Second, I'm still confused...

Perryg wrote:Not at all. Never run VBox as admin/root.
What I am saying is the user that installs, starts VirtualBox & creates guests must be the same user and be in the vboxusers group.
This sets the VBOX_USER_HOME environment (chapter 10.1.3 Global configuration data) in your VirtualBox users manual.

I'm pretty sure I have the User set up correctly. Here's what I have.

10.1.3 Global configuration data
In addition to the files of the virtual machines, VirtualBox maintains global configuration data.
On Windows, Linux and Solaris, this is in $HOME/.VirtualBox (which makes it hidden on Linux
and Solaris), whereas on a Mac this resides in $HOME/Library/VirtualBox.
VirtualBox creates this configuration directory automatically if necessary. Optionally, you can
supply an alternate configuration directory by setting the VBOX_USER_HOME environment variable.
(Since the global VirtualBox.xml settings file points to all other configuration files, this
allows for switching between several VirtualBox configurations entirely.)
Most importantly, in this directory, VirtualBox stores its global settings file, another XML file
called VirtualBox.xml. This includes global configuration options and the list of registered
virtual machines with pointers to their XML settings files.

So if I'm understanding the manual text and your comments correctly, I should see the .Virtualbox directory under my /home/{user}/ path...? Here's a screenshot of my Webmin File Manager:

If I dig a little deeper, and open (but not edit) the Virtualbox.xml file, I find these configuration variables:

Code: Select all

<MachineRegistry><MachineEntry uuid="{29bffdbc-dec9-46bc-a9e4-b2f7198ae8ab}" src="/home/Drew/VirtualBox VMs/BonesVM/BonesVM.vbox"/>
<MachineEntry uuid="{6bfed474-c4fa-44c4-a314-1b9c3bc470dc}" src="/home/Drew/VirtualBox VMs/xpvm/xpvm.vbox"/>
</MachineRegistry>

Yet, when I try to turn on vrde through the CLI, the UUID for BonesVM does not appear to be "registered":

Code: Select all

> VBoxManage modifyvm {29bffdbc-dec9-46bc-a9e4-b2f7198ae8ab} --vrde on
VBoxManage: error: Could not find a registered machine with UUID {29bffdbc-dec9-46bc-a9e4-b2f7198ae8ab}
VBoxManage: error: Details: code VBOX_E_OBJECT_NOT_FOUND (0x80bb0001), component VirtualBox, interface IVirtualBox, callee nsISupports
Context: "FindMachine(Bstr(a->argv[0]).raw(), machine.asOutParam())" at line 360 of file VBoxManageModifyVM.cpp

So I think Vbox is set up under user=Drew and I'm logged on to the host machine as user=Drew, and I seem to be getting conflicting information in the response to CLI commands through VBoxManage compared to what is apparent in my Vbox configuration files. Any thoughts?

Thanks,
Drew

Post by **Perryg** » 17. Nov 2011, 19:26

One thing I did was make sure the VBOXWEB_USER={known Linux User} in my /etc/default/virtualbox file.

Remember this from your other topic? Like I said you have too many different entries of users. At this point it appears that the phpvirtualbox is mis-configured.

Drew5316 · Post by **Drew5316** » 17. Nov 2011, 19:50

Perryg wrote:
One thing I did was make sure the VBOXWEB_USER={known Linux User} in my /etc/default/virtualbox file.
Remember this from your other topic? Like I said you have too many different entries of users. At this point it appears that the phpvirtualbox is mis-configured.

Here's that config file in it's entirety (unchanged):

Code: Select all

VBOXWEB_USER=Drew

I feel like I just got thrown over the phpvirtualbox : virtualbox fence... I'll hit up Ian and see if he has any thoughts.

Post by **Perryg** » 17. Nov 2011, 20:04

Well you didn't tell me that you had changed the user, so how was I to tell?

Anyway I would not worry about phpvirtualbox until you can run VirtualBox and start a guest from the CLI if it were me.

I know this is harder for someone just learning but when you add more pieces to the puzzle it becomes complicated.
So at this point as far as VirtualBox is concerned you do not have a registered guest. You can get past this by following the users manual.
Chapter 7.1.3 Step by step: creating a virtual machine on a headless server. It is step by step and really does work.

If however you are certain that VirtualBox is installed and configured properly, and that the vboxweb service is actually running, you can see if the phpvirtualbox people can help you through the configuration. I simply don't use it, so I would be of little help. I tested it sometime ago and it did work but I prefer the command line myself.

Drew5316 · Post by **Drew5316** » 19. Nov 2011, 02:00

So here's where I'm at... Built a new machine. Been tearing my hair out for hours trying to get Samba to work -- separate and unrelated issue, but not helping my psychological state (and Pandora is dishing up a serious dose of "thumbs down" tunes). Took a break from Samba-land to install VBox. Here's what I did:

1. /etc/apt/sources.list added "deb http://download.virtualbox.org/virtualbox/debian lucid contrib non-free"
2. Downloaded Oracle Public Key to /tmp
3. apt-get update
4. apt-get install virtualbox-4.1
5. apt-key add /tmp/oracle_vbox.asc response:OK
6. apt-get install dkms
7. Downloaded VirtualBox 4.1.6 Oracle VM VirtualBox Extension Pack to /tmp
8. VBoxManage extpack install /tmp/Oracle_VM_VirtualBox_Extension_Pack-4.1.6-74713.vbox-extpack
This is where it starts to fall apart:

Code: Select all

> VBoxManage extpack install /tmp/Oracle_VM_VirtualBox_Extension_Pack-4.1.6-74713.vbox-extpack
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
         available for the current kernel (2.6.32-35-generic) or it failed to
         load. Please recompile the kernel module and install it by

           sudo /etc/init.d/vboxdrv setup

         You will not be able to start VMs until this problem is fixed.
0%...
Progress state: NS_ERROR_FAILURE
VBoxManage: error: Failed to install "/tmp/Oracle_VM_VirtualBox_Extension_Pack-4.1.6-74713.vbox-extpack": Extension pack 'Oracle VM VirtualBox Extension Pack' is already installed. In case of a reinstallation, please uninstall it first

9. /etc/init.d/vboxdrv setup

Code: Select all

> /etc/init.d/vboxdrv setup
 * Stopping VirtualBox kernel modules
   ...done.
 * Uninstalling old VirtualBox DKMS kernel modules
   ...done.
 * Trying to register the VirtualBox kernel modules using DKMS

Error! Your kernel headers for kernel 2.6.32-35-generic cannot be found at
/lib/modules/2.6.32-35-generic/build or /lib/modules/2.6.32-35-generic/source.

 * Failed, trying without DKMS
 * Recompiling VirtualBox kernel modules

 * Look at /var/log/vbox-install.log to find out what went wrong

10. Off to find out what that log looks like...

Uninstalling modules from DKMS
Attempting to install using DKMS

Creating symlink /var/lib/dkms/vboxhost/4.1.6/source ->
/usr/src/vboxhost-4.1.6

DKMS: add Completed.
You can use the --kernelsourcedir option to tell DKMS where it's located, or you could install the linux-headers-2.6.32-35-generic package.
Failed to install using DKMS, attempting to install without
Makefile:172: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.

11. Grasping for straws over at Bootup and Shutdown module, trying to turn on vboxdrv manually:

Starting service vboxdrv ..

* Starting VirtualBox kernel modules

* modprobe vboxdrv failed. Please use 'dmesg' to find out why

.. done.

Starting service vboxweb-service ..

.. done.

Enabling service vboxdrv at boot time.

Enabling service vboxweb-service at boot time.

12. dmesg

Code: Select all

> dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-35-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #78-Ubuntu SMP Tue Oct 11 15:27:15 UTC 2011 (Ubuntu 2.6.32-35.78-generic 2.6.32.46+drm33.20)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
[    0.000000]  BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.2 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbfff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0D0000000 mask FF8000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000bfff0000 (usable)
[    0.000000]  modified: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
[    0.000000]  modified: 00000000bfff3000 - 00000000c0000000 (ACPI data)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 3765c000 - 37fef332
[    0.000000] Allocated new RAMDISK: 008e5000 - 01278332
[    0.000000] Move RAMDISK from 000000003765c000 - 0000000037fef331 to 008e5000 - 01278331
[    0.000000] ACPI: RSDP 000f75e0 00014 (v00 Nvidia)
[    0.000000] ACPI: RSDT bfff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP bfff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT bfff30c0 04561 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS bfff0000 00040
[    0.000000] ACPI: APIC bfff7640 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2183MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008e0f18]    TEXT DATA BSS ==> [0000100000 - 00008e0f18]
[    0.000000]   #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #5 [00008e1000 - 00008e4119]              BRK ==> [00008e1000 - 00008e4119]
[    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #7 [00008e5000 - 0001278332]      NEW RAMDISK ==> [00008e5000 - 0001278332]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000bfff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bfff0
[    0.000000] On node 0 totalpages: 786303
[    0.000000] free_area_init_node: node 0, pgdat c079a7a0, node_mem_map c127a200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4368 pages used for memmap
[    0.000000]   HighMem zone: 554722 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36312 r0 d21032 u4194304
[    0.000000] pcpu-alloc: s36312 r0 d21032 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 780159
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-35-generic root=UUID=5718dc76-cf59-421f-848d-2078da631f3a ro
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 15728000 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:000bfff0)
[    0.000000] Memory: 3085552k/3145664k available (4678k kernel code, 58768k reserved, 2124k data, 668k init, 2236360k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a5000 - 0xc084c000   ( 668 kB)
[    0.000000]       .data : 0xc0591bd7 - 0xc07a4d48   (2124 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0591bd7   (4678 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:256
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2087.951 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4175.90 BogoMIPS (lpj=8351804)
[    0.004160] Security Framework initialized
[    0.004256] AppArmor: AppArmor initialized
[    0.004328] Mount-cache hash table entries: 512
[    0.004560] Initializing cgroup subsys ns
[    0.004628] Initializing cgroup subsys cpuacct
[    0.004697] Initializing cgroup subsys memory
[    0.004773] Initializing cgroup subsys devices
[    0.004841] Initializing cgroup subsys freezer
[    0.004908] Initializing cgroup subsys net_cls
[    0.004997] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.005068] CPU: L2 Cache: 512K (64 bytes/line)
[    0.005137] mce: CPU supports 4 MCE banks
[    0.005221] Performance Events: AMD PMU driver.
[    0.005341] ... version:                0
[    0.005407] ... bit width:              48
[    0.005472] ... generic registers:      4
[    0.005537] ... value mask:             0000ffffffffffff
[    0.005604] ... max period:             00007fffffffffff
[    0.005671] ... fixed-purpose events:   0
[    0.005737] ... event mask:             000000000000000f
[    0.005806] Checking 'hlt' instruction... OK.
[    0.020605] SMP alternatives: switching to UP code
[    0.026399] Freeing SMP alternatives: 19k freed
[    0.026489] ACPI: Core revision 20090903
[    0.033905] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.033980] ftrace: allocating 21731 entries in 43 pages
[    0.036144] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.036600] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.076389] CPU0: AMD Athlon(tm) XP 2800+ stepping 00
[    0.080001] Brought up 1 CPUs
[    0.080001] Total of 1 processors activated (4175.90 BogoMIPS).
[    0.080001] CPU0 attaching NULL sched-domain.
[    0.080001] devtmpfs: initialized
[    0.080001] regulator: core version 0.5
[    0.080001] Time: 20:43:00  Date: 11/18/11
[    0.080001] NET: Registered protocol family 16
[    0.080001] EISA bus registered
[    0.080001] ACPI: bus type pci registered
[    0.109781] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
[    0.109850] PCI: Using configuration type 1 for base access
[    0.110924] bio: create slab <bio-0> at 0
[    0.111790] ACPI: EC: Look up EC in DSDT
[    0.118488] ACPI: Interpreter enabled
[    0.118556] ACPI: (supports S0 S1 S3 S4 S5)
[    0.118891] ACPI: Using IOAPIC for interrupt routing
[    0.126590] ACPI: No dock devices found.
[    0.126761] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.126873] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
[    0.126890] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
[    0.127162] pci 0000:00:01.1: reg 10 io port: [0xe000-0xe01f]
[    0.127198] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.127268] pci 0000:00:01.1: PME# disabled
[    0.127364] pci 0000:00:02.0: reg 10 32bit mmio: [0xe6087000-0xe6087fff]
[    0.127399] pci 0000:00:02.0: supports D1 D2
[    0.127402] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.127472] pci 0000:00:02.0: PME# disabled
[    0.127562] pci 0000:00:02.1: reg 10 32bit mmio: [0xe6082000-0xe6082fff]
[    0.127598] pci 0000:00:02.1: supports D1 D2
[    0.127600] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.127671] pci 0000:00:02.1: PME# disabled
[    0.127767] pci 0000:00:02.2: reg 10 32bit mmio: [0xe6083000-0xe60830ff]
[    0.127808] pci 0000:00:02.2: supports D1 D2
[    0.127811] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.127882] pci 0000:00:02.2: PME# disabled
[    0.127979] pci 0000:00:04.0: reg 10 32bit mmio: [0xe6086000-0xe6086fff]
[    0.127986] pci 0000:00:04.0: reg 14 io port: [0xe400-0xe407]
[    0.128024] pci 0000:00:04.0: supports D1 D2
[    0.128027] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.128098] pci 0000:00:04.0: PME# disabled
[    0.128188] pci 0000:00:05.0: reg 10 32bit mmio: [0xe6000000-0xe607ffff]
[    0.128223] pci 0000:00:05.0: supports D1 D2
[    0.128250] pci 0000:00:06.0: reg 10 io port: [0xd000-0xd0ff]
[    0.128256] pci 0000:00:06.0: reg 14 io port: [0xd400-0xd47f]
[    0.128263] pci 0000:00:06.0: reg 18 32bit mmio: [0xe6080000-0xe6080fff]
[    0.128291] pci 0000:00:06.0: supports D1 D2
[    0.128358] pci 0000:00:09.0: reg 20 io port: [0xf000-0xf00f]
[    0.128407] pci 0000:00:0d.0: reg 10 32bit mmio: [0xe6084000-0xe60847ff]
[    0.128414] pci 0000:00:0d.0: reg 14 32bit mmio: [0xe6085000-0xe608503f]
[    0.128446] pci 0000:00:0d.0: supports D1 D2
[    0.128449] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.128519] pci 0000:00:0d.0: PME# disabled
[    0.128671] pci 0000:01:04.0: reg 10 32bit mmio: [0xe5020000-0xe5023fff]
[    0.128680] pci 0000:01:04.0: reg 14 io port: [0xa000-0xa0ff]
[    0.128708] pci 0000:01:04.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.128733] pci 0000:01:04.0: supports D1 D2
[    0.128736] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.128807] pci 0000:01:04.0: PME# disabled
[    0.128917] pci 0000:01:08.0: reg 10 32bit mmio: [0xe5000000-0xe500ffff]
[    0.128926] pci 0000:01:08.0: reg 14 32bit mmio: [0xe5010000-0xe501ffff]
[    0.129014] pci 0000:01:0b.0: reg 10 io port: [0xa400-0xa407]
[    0.129022] pci 0000:01:0b.0: reg 14 io port: [0xa800-0xa803]
[    0.129030] pci 0000:01:0b.0: reg 18 io port: [0xac00-0xac07]
[    0.129038] pci 0000:01:0b.0: reg 1c io port: [0xb000-0xb003]
[    0.129046] pci 0000:01:0b.0: reg 20 io port: [0xb400-0xb40f]
[    0.129054] pci 0000:01:0b.0: reg 24 32bit mmio: [0xe5024000-0xe50241ff]
[    0.129063] pci 0000:01:0b.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[    0.129083] pci 0000:01:0b.0: supports D1 D2
[    0.129118] pci 0000:00:08.0: bridge io port: [0xa000-0xbfff]
[    0.129123] pci 0000:00:08.0: bridge 32bit mmio: [0xe4000000-0xe5ffffff]
[    0.129159] pci 0000:03:00.0: reg 10 32bit mmio: [0xe1000000-0xe1ffffff]
[    0.129165] pci 0000:03:00.0: reg 14 32bit mmio pref: [0xd8000000-0xdfffffff]
[    0.129172] pci 0000:03:00.0: reg 18 32bit mmio: [0xe2000000-0xe2ffffff]
[    0.129188] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.129242] pci 0000:00:1e.0: bridge 32bit mmio: [0xe1000000-0xe3ffffff]
[    0.129247] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
[    0.129257] pci_bus 0000:00: on NUMA node 0
[    0.129263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.129402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.129701] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[    0.189190] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.190132] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.190980] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.191821] ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.192643] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.193583] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.194432] ACPI: PCI Interrupt Link [LUBB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.195278] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.196136] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.196978] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.197818] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.198757] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.199604] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.200454] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.201296] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.202233] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.203163] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[    0.203534] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[    0.203856] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[    0.204173] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[    0.204495] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[    0.204931] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[    0.205455] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[    0.205977] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[    0.206499] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0
[    0.207020] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[    0.207542] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[    0.208109] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[    0.208486] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[    0.209008] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0
[    0.209530] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[    0.210107] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[    0.210661] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.210743] vgaarb: loaded
[    0.210946] SCSI subsystem initialized
[    0.211104] libata version 3.00 loaded.
[    0.211213] usbcore: registered new interface driver usbfs
[    0.211294] usbcore: registered new interface driver hub
[    0.211396] usbcore: registered new device driver usb
[    0.211615] ACPI: WMI: Mapper loaded
[    0.211681] PCI: Using ACPI for IRQ routing
[    0.211936] NetLabel: Initializing
[    0.212005] NetLabel:  domain hash size = 128
[    0.212071] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.212152] NetLabel:  unlabeled traffic allowed by default
[    0.212263] Switching to clocksource tsc
[    0.214515] AppArmor: AppArmor Filesystem Enabled
[    0.214611] pnp: PnP ACPI init
[    0.214697] ACPI: bus type pnp registered
[    0.219008] pnp: PnP ACPI: found 13 devices
[    0.219074] ACPI: ACPI bus type pnp unregistered
[    0.219143] PnPBIOS: Disabled by ACPI PNP
[    0.219226] system 00:00: ioport range 0x4000-0x407f has been reserved
[    0.219296] system 00:00: ioport range 0x4080-0x40ff has been reserved
[    0.219366] system 00:00: ioport range 0x4400-0x447f has been reserved
[    0.219435] system 00:00: ioport range 0x4480-0x44ff has been reserved
[    0.219504] system 00:00: ioport range 0x4200-0x427f has been reserved
[    0.219574] system 00:00: ioport range 0x4280-0x42ff has been reserved
[    0.219655] system 00:01: ioport range 0x5000-0x503f has been reserved
[    0.219725] system 00:01: ioport range 0x5500-0x553f has been reserved
[    0.219799] system 00:02: iomem range 0xd8800-0xdbfff has been reserved
[    0.219869] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
[    0.219939] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
[    0.220009] system 00:02: iomem range 0xfc000-0xfffff could not be reserved
[    0.220079] system 00:02: iomem range 0xbfff0000-0xbfffffff could not be reserved
[    0.220161] system 00:02: iomem range 0xffff0000-0xffffffff has been reserved
[    0.220231] system 00:02: iomem range 0x0-0x9ffff could not be reserved
[    0.220301] system 00:02: iomem range 0x100000-0xbffeffff could not be reserved
[    0.220382] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.220463] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.220537] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[    0.255338] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[    0.255408] pci 0000:00:08.0:   IO window: 0xa000-0xbfff
[    0.255479] pci 0000:00:08.0:   MEM window: 0xe4000000-0xe5ffffff
[    0.255550] pci 0000:00:08.0:   PREFETCH window: 0xc0000000-0xc00fffff
[    0.255637] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.255705] pci 0000:00:1e.0:   IO window: disabled
[    0.255774] pci 0000:00:1e.0:   MEM window: 0xe1000000-0xe3ffffff
[    0.255844] pci 0000:00:1e.0:   PREFETCH window: 0xd8000000-0xdfffffff
[    0.255924] pci 0000:00:08.0: setting latency timer to 64
[    0.255932] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.255936] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.255939] pci_bus 0000:01: resource 0 io:  [0xa000-0xbfff]
[    0.255942] pci_bus 0000:01: resource 1 mem: [0xe4000000-0xe5ffffff]
[    0.255945] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xc00fffff]
[    0.255949] pci_bus 0000:03: resource 1 mem: [0xe1000000-0xe3ffffff]
[    0.255952] pci_bus 0000:03: resource 2 pref mem [0xd8000000-0xdfffffff]
[    0.255991] NET: Registered protocol family 2
[    0.256157] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.256651] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.258120] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.258812] TCP: Hash tables configured (established 131072 bind 65536)
[    0.258882] TCP reno registered
[    0.259056] NET: Registered protocol family 1
[    0.423707] pci 0000:03:00.0: Boot video device
[    0.423927] cpufreq-nforce2: Detected nForce2 chipset revision C1
[    0.423996] cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss.
[    0.424084] cpufreq-nforce2: FSB currently at 167 MHz, FID 12.5
[    0.424215] Scanning for low memory corruption every 60 seconds
[    0.424404] audit: initializing netlink socket (disabled)
[    0.424482] type=2000 audit(1321648980.423:1): initialized
[    0.433927] Trying to unpack rootfs image as initramfs...
[    0.444275] highmem bounce pool size: 64 pages
[    0.444352] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.449738] VFS: Disk quotas dquot_6.5.2
[    0.449881] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.450604] fuse init (API version 7.13)
[    0.450765] msgmni has been set to 1660
[    0.455848] alg: No test for stdrng (krng)
[    0.455991] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.456073] io scheduler noop registered
[    0.456139] io scheduler anticipatory registered
[    0.456205] io scheduler deadline registered
[    0.456325] io scheduler cfq registered (default)
[    0.456537] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.456630] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.456814] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.456899] ACPI: Power Button [PWRB]
[    0.457032] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.457114] ACPI: Power Button [PWRF]
[    0.457603] processor LNXCPU:00: registered as cooling_device0
[    0.465128] isapnp: Scanning for PnP cards...
[    0.476230] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.476424] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.476875] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.478147] brd: module loaded
[    0.478746] loop: module loaded
[    0.478905] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.479203] pata_acpi 0000:00:09.0: setting latency timer to 64
[    0.479560] Fixed MDIO Bus: probed
[    0.479697] PPP generic driver version 2.4.2
[    0.479804] tun: Universal TUN/TAP device driver, 1.6
[    0.479872] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.480021] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.482246] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.482319]   alloc irq_desc for 22 on node -1
[    0.482322]   alloc kstat_irqs on node -1
[    0.482331] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 22 (level, high) -> IRQ 22
[    0.482431] ehci_hcd 0000:00:02.2: setting latency timer to 64
[    0.482435] ehci_hcd 0000:00:02.2: EHCI Host Controller
[    0.482539] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[    0.482656] ehci_hcd 0000:00:02.2: debug port 1
[    0.482729] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
[    0.482748] ehci_hcd 0000:00:02.2: irq 22, io mem 0xe6083000
[    0.532031] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
[    0.532272] usb usb1: configuration #1 chosen from 1 choice
[    0.532374] hub 1-0:1.0: USB hub found
[    0.532452] hub 1-0:1.0: 6 ports detected
[    0.532597] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.533009] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[    0.533081]   alloc irq_desc for 21 on node -1
[    0.533083]   alloc kstat_irqs on node -1
[    0.533092] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, high) -> IRQ 21
[    0.533193] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.533197] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.533316] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.533427] ohci_hcd 0000:00:02.0: irq 21, io mem 0xe6087000
[    0.617436] usb usb2: configuration #1 chosen from 1 choice
[    0.617544] hub 2-0:1.0: USB hub found
[    0.617625] hub 2-0:1.0: 3 ports detected
[    0.618077] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
[    0.618149]   alloc irq_desc for 20 on node -1
[    0.618152]   alloc kstat_irqs on node -1
[    0.618160] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 20 (level, high) -> IRQ 20
[    0.618261] ohci_hcd 0000:00:02.1: setting latency timer to 64
[    0.618265] ohci_hcd 0000:00:02.1: OHCI Host Controller
[    0.618377] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[    0.618494] ohci_hcd 0000:00:02.1: irq 20, io mem 0xe6082000
[    0.709792] usb usb3: configuration #1 chosen from 1 choice
[    0.709900] hub 3-0:1.0: USB hub found
[    0.709979] hub 3-0:1.0: 3 ports detected
[    0.710111] uhci_hcd: USB Universal Host Controller Interface driver
[    0.710305] PNP: No PS/2 controller found. Probing ports directly.
[    0.717536] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.717614] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.717907] mice: PS/2 mouse device common for all mice
[    0.718128] rtc_cmos 00:06: RTC can wake from S4
[    0.718246] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.718340] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    0.718522] device-mapper: uevent: version 1.0.3
[    0.723887] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.724063] device-mapper: multipath: version 1.1.0 loaded
[    0.724132] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.724347] EISA: Probing bus 0 at eisa.0
[    0.724433] Cannot allocate resource for EISA slot 4
[    0.724500] Cannot allocate resource for EISA slot 5
[    0.724579] EISA: Detected 0 cards.
[    0.727792] cpuidle: using governor ladder
[    0.727862] cpuidle: using governor menu
[    0.728386] TCP cubic registered
[    0.728633] NET: Registered protocol family 10
[    0.729484] NET: Registered protocol family 17
[    0.729594] powernow-k8: Processor cpuid 6a0 not supported
[    0.729682] Using IPI No-Shortcut mode
[    0.729865] PM: Resume from disk failed.
[    0.729882] registered taskstats version 1
[    0.730260]   Magic number: 3:191:751
[    0.730351] tty ttyS2: hash matches
[    0.730499] rtc_cmos 00:06: setting system clock to 2011-11-18 20:43:00 UTC (1321648980)
[    0.730582] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.730650] EDD information not available.
[    1.068483] Freeing initrd memory: 9804k freed
[    1.122525] isapnp: No Plug & Play device found
[    1.122680] usb 3-1: new low speed USB device using ohci_hcd and address 2
[    1.122791] Freeing unused kernel memory: 668k freed
[    1.123648] Write protecting the kernel text: 4680k
[    1.123748] Write protecting the kernel read-only data: 1844k
[    1.149786] ramzswap: disk size set to 1548468 kB
[    1.161335] udev: starting version 151
[    1.230785] Adding 1548464k swap on /dev/ramzswap0.  Priority:100 extents:1 across:1548464k SS
[    1.333454] Floppy drive(s): fd0 is 1.44M
[    1.341410] usb 3-1: configuration #1 chosen from 1 choice
[    1.362268] FDC 0 is a post-1991 82077
[    1.409326] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.409754] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[    1.409827] forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22
[    1.409913] forcedeth 0000:00:04.0: setting latency timer to 64
[    1.409971] nv_probe: set workaround bit for reversed mac addr
[    1.424546] Linux agpgart interface v0.103
[    1.461370] sata_sil 0000:01:0b.0: version 2.4
[    1.461625] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[    1.461701]   alloc irq_desc for 18 on node -1
[    1.461704]   alloc kstat_irqs on node -1
[    1.461713] sata_sil 0000:01:0b.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18
[    1.462058] scsi0 : sata_sil
[    1.463079] scsi1 : sata_sil
[    1.463251] ata1: SATA max UDMA/100 mmio m512@0xe5024000 tf 0xe5024080 irq 18
[    1.463323] ata2: SATA max UDMA/100 mmio m512@0xe5024000 tf 0xe50240c0 irq 18
[    1.463689] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[    1.463760]   alloc irq_desc for 17 on node -1
[    1.463762]   alloc kstat_irqs on node -1
[    1.463769] skge 0000:01:04.0: PCI INT A -> Link[APC2] -> GSI 17 (level, high) -> IRQ 17
[    1.463898] skge 1.13 addr 0xe5020000 irq 17 chip Yukon-Lite rev 7
[    1.464735] skge eth0: addr 00:0e:a6:24:87:a4
[    1.471731] [drm] Initialized drm 1.1.0 20060810
[    1.484311] usbcore: registered new interface driver hiddev
[    1.484875] usbcore: registered new interface driver usbhid
[    1.485039] usbhid: v2.6:USB HID core driver
[    1.784043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[    1.792782] ata1.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
[    1.792853] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.808797] ata1.00: configured for UDMA/100
[    1.809006] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
[    1.809268] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.809632] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.809777] sd 0:0:0:0: [sda] Write Protect is off
[    1.809845] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.809879] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.810139]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    1.885755] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.929022] forcedeth 0000:00:04.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:0e:a6:24:7b:f7
[    1.929106] forcedeth 0000:00:04.0: timirq lnktim desc-v1
[    1.929199] pata_amd 0000:00:09.0: version 0.4.1
[    1.929265] pata_amd 0000:00:09.0: setting latency timer to 64
[    1.929593] scsi2 : pata_amd
[    1.929784] scsi3 : pata_amd
[    1.930677] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.930748] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.930933] agpgart: Detected NVIDIA nForce2 chipset
[    1.939172] agpgart-nvidia 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[    1.939573] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
[    1.939646] ohci1394 0000:00:0d.0: PCI INT A -> Link[APCM] -> GSI 21 (level, high) -> IRQ 21
[    1.939732] ohci1394 0000:00:0d.0: setting latency timer to 64
[    1.994019] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[e6084000-e60847ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    2.124344] ata3.00: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS06, max UDMA/33
[    2.124440] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[    2.128027] ata2: SATA link down (SStatus 0 SControl 310)
[    2.164271] ata3.00: configured for UDMA/33
[    2.165675] scsi 2:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S162L TS06 PQ: 0 ANSI: 5
[    2.173922] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.174005] Uniform CD-ROM driver Revision: 3.20
[    2.174334] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.174475] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.379009] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.0/input/input3
[    2.379212] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.1-1/input0
[    2.399514] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[    2.401339] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.1/input/input4
[    2.402288] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-1/input1
[    2.405309] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    2.405387]   alloc irq_desc for 19 on node -1
[    2.405389]   alloc kstat_irqs on node -1
[    2.405398] nouveau 0000:03:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
[    2.410040] [drm] nouveau 0000:03:00.0: failed to evaluate _DSM: 5
[    2.410436] [drm] nouveau 0000:03:00.0: Detected an NV40 generation card (0x04a100a1)
[    2.411006] [drm] nouveau 0000:03:00.0: Attempting to load BIOS image from PROM
[    2.715732] [drm] nouveau 0000:03:00.0: ... appears to be valid
[    2.715804] [drm] nouveau 0000:03:00.0: BIT BIOS found
[    2.715872] [drm] nouveau 0000:03:00.0: Bios version 05.44.a2.07
[    2.715942] [drm] nouveau 0000:03:00.0: BIT table 'd' not found
[    2.716019] [drm] nouveau 0000:03:00.0: Found Display Configuration Block version 3.0
[    2.716102] [drm] nouveau 0000:03:00.0: DCB connector table: VHER 0x30 5 7 2
[    2.716173] [drm] nouveau 0000:03:00.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
[    2.716254] [drm] nouveau 0000:03:00.0:   1: 0x00002130: type 0x30 idx 1 tag 0x08
[    2.716335] [drm] nouveau 0000:03:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
[    2.716415] [drm] nouveau 0000:03:00.0:   3: 0x00000211: type 0x11 idx 2 tag 0xff
[    2.716496] [drm] nouveau 0000:03:00.0:   4: 0x00000213: type 0x13 idx 2 tag 0xff
[    2.716577] [drm] nouveau 0000:03:00.0: Raw DCB entry 0: 01000300 00000028
[    2.716648] [drm] nouveau 0000:03:00.0: Raw DCB entry 1: 02011310 00000028
[    2.716717] [drm] nouveau 0000:03:00.0: Raw DCB entry 2: 01011312 00000000
[    2.716787] [drm] nouveau 0000:03:00.0: Raw DCB entry 3: 020223f1 0084c080
[    2.716863] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0xDD1E
[    2.724513] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0xE003
[    2.780220] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0xE491
[    2.780334] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0xE5EE
[    2.788186] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0xE6A0
[    2.809062] [TTM] Zone  kernel: Available graphics memory: 430290 kiB.
[    2.809132] [TTM] Zone highmem: Available graphics memory: 1548470 kiB.
[    2.809214] [drm] nouveau 0000:03:00.0: 128 MiB VRAM
[    2.809345] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
[    2.809426] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode.
[    2.809500] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
[    2.809642] nouveau 0000:03:00.0: putting AGP V3 device into 8x mode
[    2.809707] [drm] nouveau 0000:03:00.0: 128 MiB GART (aperture)
[    2.810080] [drm] nouveau 0000:03:00.0: Allocating FIFO number 0
[    2.812883] [drm] nouveau 0000:03:00.0: nouveau_channel_alloc: initialised FIFO 0
[    2.813011] [drm] nouveau 0000:03:00.0: Initial CRTC_OWNER is 0
[    2.813090] [drm] nouveau 0000:03:00.0: Saving VGA fonts
[    2.886808] [drm] nouveau 0000:03:00.0: Detected a VGA connector
[    2.887089] [drm] nouveau 0000:03:00.0: Detected a DVI-I connector
[    2.887259] [drm] nouveau 0000:03:00.0: Detected a TV connector
[    2.889806] [drm] nouveau 0000:03:00.0: Setting dpms mode 3 on vga encoder (output 0)
[    2.889893] [drm] nouveau 0000:03:00.0: Setting dpms mode 3 on vga encoder (output 1)
[    2.889978] [drm] nouveau 0000:03:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[    2.890064] [drm] nouveau 0000:03:00.0: Setting dpms mode 3 on TV encoder (output 3)
[    3.124987] ohci1394: fw-host0: SelfID received outside of bus reset sequence
[    3.188297] [drm] nouveau 0000:03:00.0: allocated 1920x1080 fb: 0x49000, bo f6af2a00
[    3.188554] fb0: nouveaufb frame buffer device
[    3.188621] registered panic notifier
[    3.188690] [drm] Initialized nouveau 0.0.15 20090420 for 0000:03:00.0 on minor 0
[    3.191645] vga16fb: initializing
[    3.191651] vga16fb: mapped to 0xc00a0000
[    3.191730] vga16fb: not registering due to another framebuffer present
[    3.214251] [drm] nouveau 0000:03:00.0: Setting dpms mode 0 on vga encoder (output 0)
[    3.214258] [drm] nouveau 0000:03:00.0: Output VGA-1 is running on CRTC 0 using output A
[    3.221875] Console: switching to colour frame buffer device 240x67
[    3.396156] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800004e0188]
[    3.470093] EXT4-fs (sda7): mounted filesystem with ordered data mode
[    4.256286] Adding 174072k swap on /dev/sda8.  Priority:-1 extents:1 across:174072k 
[    4.461092] udev: starting version 151
[    4.776699] i2c i2c-2: nForce2 SMBus adapter at 0x5000
[    4.776724] i2c i2c-3: nForce2 SMBus adapter at 0x5500
[    4.817725] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.038120] gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 59659kHz
[    5.333506] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[    5.333515] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 20 (level, high) -> IRQ 20
[    5.333563] Intel ICH 0000:00:06.0: setting latency timer to 64
[    5.403496] skge eth0: enabling interface
[    5.410654] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.656027] intel8x0_measure_ac97_clock: measured 52569 usecs (2552 samples)
[    5.656033] intel8x0: clocking to 47461
[   15.436010] eth1: no IPv6 routers present
[   74.531634] ondemand governor failed, too long transition latency of HW, fallback to performance governor

OK, it's not working... any advice?

Thanks,
Drew

Post by **Perryg** » 19. Nov 2011, 02:15

Code: Select all

3. apt-get update
4. apt-get install virtualbox-4.1
5. apt-key add /tmp/oracle_vbox.asc response:OK
6. apt-get install dkms

Got the order mixed up. DKMS should have been installed before VirtualBox.

I always install these packages first. (debian based distro)

Code: Select all

sudo apt-get install dkms build-essential linux-headers-generic

Then install VirtualBox. Add my user name to the vboxusers group, then reboot. Works every time.

Note: I do all of the above from the command line. I don't hold stock in helper programs working properly to do these steps.
Just open a terminal or TTY or just type it if you are on a server CLI. It really goes fast and works.

Drew5316 · Post by **Drew5316** » 21. Nov 2011, 01:23

OK, brand new install of only virtualbox-4.1 up and running. Created a VM according to the user manual, and got stuck at:

8. On the client machine, fire up the RDP viewer and try to connect to the server (see chapter
7.1.1, Common third-party RDP viewers, page 95 above for how to use various common
RDP viewers).
You should now be seeing the installation routine of your guest operating system remotely
in the RDP viewer.

Nope. Firing up RDC and going to the hostIP:vrdeport I'm getting an error that it cannot connect. If I do a VBoxManage showvminfo, I get:

Code: Select all

NIC 1:           MAC: 080027D2583B, Attachment: NAT, Cable connected: on, Trace:                                                        off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Prom                                                       isc Policy: deny
NIC 1 Settings:  MTU: 0, Socket (send: 64, receive: 64), TCP Window (send:64, re                                                       ceive: 64)
VRDE:            enabled (Address 0.0.0.0, Ports 3389, MultiConn: off, ReuseSing                                                       leConn: off, Authentication type: null)

What I don't like is the 0.0.0.0 IP address. Shouldn't this be the IP address of the host?

Drew

virtualbox.org

Cannot open host device (CD-ROM)

Cannot open host device (CD-ROM)

Re: Cannot open host device (CD-ROM)

Re: Cannot open host device (CD-ROM)

Re: Cannot open host device (CD-ROM)

Re: Cannot open host device (CD-ROM)

Re: Cannot open host device (CD-ROM)

Re: Cannot open host device (CD-ROM)

Re: Cannot open host device (CD-ROM)

Re: Cannot open host device (CD-ROM)

Re: Cannot open host device (CD-ROM)

Re: Cannot open host device (CD-ROM)

Re: Cannot open host device (CD-ROM)

Re: Cannot open host device (CD-ROM)

Re: Cannot open host device (CD-ROM)

Re: Cannot open host device (CD-ROM)