i just installed(for the second time) a new Linux Mint 20.3 on a new Intel NUC 11 (NUC11PAHi5) and tried to get my virtual Machines working as usually on the older NUCs (5 and 8) i used before (they are still running).
Then i updateted and upgraded the system and installed virtualbox 6.1.34 via apt with no errors.
When i import my old Virtual Machines (Win7 Prof. and Win10 Prof.) they dont get any Network connection. I tried every NIC configuration from the GUI and even installed the virtio driver version 1.171.1 but still no network.
lspci -nnk
Code: Select all
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:9a14] (rev 01)
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device [8086:3004]
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:9a49] (rev 01)
DeviceName: Onboard - Video
Subsystem: Intel Corporation Device [8086:3004]
Kernel modules: i915
00:06.0 PCI bridge [0604]: Intel Corporation Device [8086:9a09] (rev 01)
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation Device [8086:9a23] (rev 01)
Kernel driver in use: pcieport
00:07.3 PCI bridge [0604]: Intel Corporation Device [8086:9a29] (rev 01)
Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation Device [8086:9a11] (rev 01)
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device [8086:3004]
00:0d.0 USB controller [0c03]: Intel Corporation Device [8086:9a13] (rev 01)
DeviceName: Onboard - Other
Kernel driver in use: xhci_hcd
00:0d.2 USB controller [0c03]: Intel Corporation Device [8086:9a1b] (rev 01)
DeviceName: Onboard - Other
Subsystem: Device [2222:1111]
00:0d.3 USB controller [0c03]: Intel Corporation Device [8086:9a1d] (rev 01)
DeviceName: Onboard - Other
Subsystem: Device [2222:1111]
00:14.0 USB controller [0c03]: Intel Corporation Device [8086:a0ed] (rev 20)
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device [8086:3004]
Kernel driver in use: xhci_hcd
00:14.2 RAM memory [0500]: Intel Corporation Device [8086:a0ef] (rev 20)
DeviceName: Onboard - Other
00:14.3 Network controller [0280]: Intel Corporation Device [8086:a0f0] (rev 20)
DeviceName: Onboard - Ethernet
Subsystem: Intel Corporation Device [8086:0074]
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
00:15.0 Serial bus controller [0c80]: Intel Corporation Device [8086:a0e8] (rev 20)
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device [8086:3004]
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller [0780]: Intel Corporation Device [8086:a0e0] (rev 20)
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device [8086:3004]
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation Device [8086:a0d3] (rev 20)
DeviceName: Onboard - SATA
Subsystem: Intel Corporation Device [8086:3004]
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:a0bc] (rev 20)
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation Device [8086:a0be] (rev 20)
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:a082] (rev 20)
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device [8086:3004]
00:1f.3 Audio device [0403]: Intel Corporation Device [8086:a0c8] (rev 20)
DeviceName: Onboard - Sound
Subsystem: Intel Corporation Device [8086:3004]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_sof_pci
00:1f.4 SMBus [0c05]: Intel Corporation Device [8086:a0a3] (rev 20)
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device [8086:3004]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 Serial bus controller [0c80]: Intel Corporation Device [8086:a0a4] (rev 20)
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device [8086:3004]
01:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd Device [144d:a809]
Subsystem: Samsung Electronics Co Ltd Device [144d:a801]
Kernel driver in use: nvme
Kernel modules: nvme
58:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Intel Corporation RTS525A PCI Express Card Reader [8086:3004]
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
59:00.0 Ethernet controller [0200]: Intel Corporation Device [8086:15f3] (rev 03)
Subsystem: Intel Corporation Device [8086:3004]
Kernel driver in use: igc
Kernel modules: igc
VBoxManage showvminfo "Win7_64-Klon"
Code: Select all
Name: Win7_64-Klon
Groups: /
Guest OS: Windows 7 (64-bit)
UUID: 0e70a9ba-3ec7-4f02-a318-452295f28916
Config file: /home/administrator/Virtualbox VM/Win7_64-Klon/Win7_64-Klon.vbox
Snapshot folder: /home/administrator/Virtualbox VM/Win7_64-Klon/Snapshots
Log folder: /home/administrator/Virtualbox VM/Win7_64-Klon/Logs
Hardware UUID: 0e70a9ba-3ec7-4f02-a318-452295f28916
Memory size: 4096MB
Page Fusion: disabled
VRAM size: 128MB
CPU exec cap: 100%
HPET: disabled
CPUProfile: host
Chipset: piix3
Firmware: BIOS
Number of CPUs: 1
PAE: disabled
Long Mode: enabled
Triple Fault Reset: disabled
APIC: enabled
X2APIC: disabled
Nested VT-x/AMD-V: disabled
CPUID Portability Level: 0
CPUID overrides: None
Boot menu mode: message and menu
Boot Device 1: Floppy
Boot Device 2: DVD
Boot Device 3: HardDisk
Boot Device 4: Not Assigned
ACPI: enabled
IOAPIC: enabled
BIOS APIC mode: APIC
Time offset: 0ms
RTC: local time
Hardware Virtualization: enabled
Nested Paging: enabled
Large Pages: disabled
VT-x VPID: enabled
VT-x Unrestricted Exec.: enabled
Paravirt. Provider: Default
Effective Paravirt. Prov.: HyperV
State: saved (since 2022-07-10T22:58:44.000000000)
Graphics Controller: VBoxSVGA
Monitor count: 1
3D Acceleration: enabled
2D Video Acceleration: disabled
Teleporter Enabled: disabled
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: disabled
Allow Tracing to Access VM: disabled
Tracing Configuration:
Autostart Enabled: disabled
Autostart Delay: 0
Default Frontend:
VM process priority: default
Storage Controller Name (0): SATA
Storage Controller Type (0): IntelAhci
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 30
Storage Controller Port Count (0): 2
Storage Controller Bootable (0): on
SATA (0, 0): /home/administrator/Virtualbox VM/Win7_64-Klon/Win7_64-Klon.vdi (UUID: 72bdde2a-e2d4-4037-9a03-b77f776eb5da)
SATA (1, 0): /home/administrator/Downloads/virtio-win-0.1.171.iso (UUID: b1293a95-c7a4-4aa4-9164-a0f297ab2f56)
NIC 1: MAC: 08002768F0BA, Attachment: Bridged Interface 'enp89s0', Cable connected: on, Trace: off (file: none), Type: virtio, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: USB Tablet
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
UART 3: disabled
UART 4: disabled
LPT 1: disabled
LPT 2: disabled
Audio: enabled (Driver: PulseAudio, Controller: HDA, Codec: STAC9221)
Audio playback: enabled
Audio capture: disabled
Clipboard Mode: Bidirectional
Drag and drop Mode: disabled
VRDE: disabled
OHCI USB: disabled
EHCI USB: disabled
xHCI USB: enabled
USB Device Filters:
<none>
Bandwidth groups: <none>
Shared folders:<none>
Capturing: not active
Capture audio: not active
Capture screens: 0
Capture file: /home/administrator/Virtualbox VM/Win7_64-Klon/Win7_64-Klon.webm
Capture dimensions: 1024x768
Capture rate: 512kbps
Capture FPS: 25kbps
Capture options: ac_enabled=false
Guest:
Configured memory balloon size: 0MB
ip a
Code: Select all
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp89s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 88:ae:dd:01:5e:0d brd ff:ff:ff:ff:ff:ff
inet 192.168.178.52/24 brd 192.168.178.255 scope global dynamic noprefixroute enp89s0
valid_lft 860850sec preferred_lft 860850sec
inet6 fe80::2d8c:5970:d8da:2142/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: wlo1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 60:dd:8e:69:a3:89 brd ff:ff:ff:ff:ff:ff
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether 52:54:00:cf:3d:24 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
5: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel master virbr0 state DOWN group default qlen 1000
link/ether 52:54:00:cf:3d:24 brd ff:ff:ff:ff:ff:ff
It is not only this virtual machine. I tried a previously working Win10 and a openwrt just to test if the network would appear on this machines but no network either.
Greetings Chyr0